ملخص المحتوى في الصفحة رقم 1
JAZZY
Elite 6
ملخص المحتوى في الصفحة رقم 2
SAFETY GUIDELINES WARNING! An authorized Pride Provider or a qualified technician must perform the initial setup of this power chair and must perform all of the procedures in this manual. The symbols below are used throughout this owner’s manual and on the power chair to identify warnings and important information. It is very important for you to read them and understand them completely. WARNING! Indicates a potentially hazardous condition/situation. Failure to follow designated procedures can c
ملخص المحتوى في الصفحة رقم 3
CONTENTS I. INTRODUCTION ................................................................................................................................. 4 II. SAFETY .................................................................................................................................................. 6 III. YOUR POWER CHAIR ..................................................................................................................... 8 IV. ASSEMBLY ............................
ملخص المحتوى في الصفحة رقم 4
I. INTRODUCTION SAFETY WELCOME to Pride Mobility Products (Pride). The power chair you have purchased combines state-of-the-art components with safety, comfort, and styling in mind. We are confident that these design features will provide you with the conveniences you expect during your daily activities. Once you understand how to safely operate and care for your power chair, it should give you years of trouble-free operation and service. Read and follow all instructions, warnings, and notes in
ملخص المحتوى في الصفحة رقم 5
I. INTRODUCTION United Kingdom: Australia: Pride Mobility Products Ltd. Pride Mobility Products Australia Pty. Ltd. 32 Wedgwood Road 20-24 Apollo Drive Bicester, Oxfordshire OX26 4UL Hallam, Victoria 3803 UK Australia NOTE: If you ever lose or misplace your copy of this manual, contact us and we will be glad to send you a new one immediately. Jazzy Elite 6 www.pridemobility.com 5
ملخص المحتوى في الصفحة رقم 6
II. SAFETY PRODUCT SAFETY SYMBOLS The symbols below are used on the power chair to identify warnings, mandatory actions, and prohibited actions. It is very important for you to read and understand them completely. NOTE: There are more warnings identified and explained in the Consumer Safety Guide that is included with your power chair. Please become familiar with all the warnings and safety information found in the Consumer Safety Guide and refer to this resource often. Read and follow the infor
ملخص المحتوى في الصفحة رقم 7
II. SAFETY GENERAL GUIDELINES MANDATORY! Do not operate your new power chair for the first time without completely reading and understanding this owner’s manual. Your power chair is a state-of-the-art life-enhancement device designed to increase mobility. Pride provides an extensive variety of products to best fit the individual needs of the power chair user. Please be aware that the final selection and purchasing decision regarding the type of power chair to be used is the responsibility of the
ملخص المحتوى في الصفحة رقم 8
III. YOUR POWER CHAIR THE JAZZY ELITE 6 POWER CHAIR The Jazzy Elite 6 Power Chair has two main assemblies: the seat assembly and the power base assembly. See figure 1. Typically, the seat assembly includes the armrests, seatback, and seat base. The power base assembly includes two motor/brake assemblies, two drive wheels, four caster wheels, two batteries, and wiring harnesses. HEADREST SEATBACK ARMRESTS SEAT ASSEMBLY CONTROLLER SEAT BASE MAIN SHROUD POWER BASE ASSEMBLY CASTER WHEEL FRONT RIGG
ملخص المحتوى في الصفحة رقم 9
III. YOUR POWER CHAIR SEAT POST MAIN SHROUD CONTROLLER HARNESS CASTER WHEEL CASTER FRONT COVER WHEELS Figure 2. The Jazzy Elite 6 Power Base Jazzy Elite 6 www.pridemobility.com 9
ملخص المحتوى في الصفحة رقم 10
III. YOUR POWER CHAIR Electrical Components The electrical components are located inside the power base. The main circuit breaker is located on the side of the power base. The power module is located under the front cover. See figure 3. Main Circuit Breaker: The main circuit breaker is a safety feature built into your power chair. When the batteries and the motors are heavily strained (e.g., from excessive loads), the main circuit breaker trips to prevent damage to the motors and the electronics
ملخص المحتوى في الصفحة رقم 11
III. YOUR POWER CHAIR Manual Freewheel Levers Your power chair has a manual freewheel lever on each motor. Manual freewheel levers enable you to disengage the drive motors from the gearboxes and maneuver the chair manually. WARNING! Do not use the power chair while the drive motors are disengaged! Do not disengage the drive motors when the power chair is on an incline or decline, as the unit could roll on its own. Only engage the freewheel mode when on a level surface. WARNING! It is important t
ملخص المحتوى في الصفحة رقم 12
IV. ASSEMBLY INITIAL ASSEMBLY Your power chair may require some assembly either before initial use or after transportation. NOTE: Any nylon insert lock nut removed during the disassembly or adjustment of the power chair must be replaced with a new nylon insert lock nut. Nylon insert lock nuts should not be reused as it may cause damage to the nylon insert, resulting in a less secure fit. Replacement nylon insert lock nuts are available at local hardware stores or by contacting your authorized P
ملخص المحتوى في الصفحة رقم 13
V. COMFORT ADJUSTMENTS COMFORT ADJUSTMENTS After becoming familiar with your power chair’s operation, you may find the need to make some adjustments to increase your comfort, such as seat height, armrest angle, foot platform angle, and controller position. Refer to the following information before making comfort adjustments. WARNING! The center of gravity of your power chair was factory set to a position that meets the needs of the demographic majority of users. Your authorized Pride Provider ha
ملخص المحتوى في الصفحة رقم 14
V. COMFORT ADJUSTMENTS Seat Position You can move the seat forward or backward by changing the seat base mounting position. To change the seat position: 1. Turn off the power to the controller. 2. Make sure the power chair is in drive mode. 3. Unplug the controller connector(s) from the power base. 4. Remove the seat from the power base. 5. Remove the screws and washers from the bottom of the seat plate. See figure 9. 6. Slide the seat plate forward or backward, aligning the holes in the plate w
ملخص المحتوى في الصفحة رقم 15
V. COMFORT ADJUSTMENTS Seatback Angle Adjustment If your power chair is equipped with an adjustable seat- back, you can adjust it to four (4) different angles: 90°, JAM NUT 102°, 105°, or 107°. To adjust the seatback angle: ARMREST 1. Remove the seatback angle adjusting screws from ANGLE ADJUSTMENT each seat hinge. See figure 10. SCREW 2. Set the seatback at the desired angle. 3. Reinstall the adjusting screws to each seat hinge ARMREST and tighten. HEIGHT ADJUSTMENT Manual Recline Seatback Adju
ملخص المحتوى في الصفحة رقم 16
V. COMFORT ADJUSTMENTS Controller Position You can move the controller in toward or out away from the armrest, or change the position of the control- ler for either left-hand or right-hand use. WARNING! Do not place the controller harness so that it can be pinched in the seat frame or the power base frame. SETSCREW To extend the controller: 1. Flip up the armrest so it is perpendicular to the floor. 2. Loosen the setscrew on the controller bracket. See figure 12. 3. Slide the controller into or
ملخص المحتوى في الصفحة رقم 17
V. COMFORT ADJUSTMENTS Foot Platform Angle Adjustment You can adjust the angle of the foot platform. See fig- ure 13. To adjust the foot platform angle: SFR RELEASE 1. Flip up the foot platform and locate the adjustment LEVER FOOTREST screw. EXTENSION 2. Turn the adjustment screw to raise or lower the front of the foot platform. ADJUSTMENT Swing-away Footrests SCREWS Swing-away Footrests (SFRs) enable you to rotate the footrests to the side before you transfer onto or off of your power chair.
ملخص المحتوى في الصفحة رقم 18
V. COMFORT ADJUSTMENTS Positioning Belt Your power chair may be equipped with a positioning belt that can be adjusted for operator comfort. See figure 16. The positioning belt is designed to support the operator so that he/she does not slide down or forward in the seat. The positioning belt is not designed for use as a restraining device. WARNING! The positioning belt should be secured at all times. Never allow the positioning belt to hang or drag on the floor as it may become entangled. To inst
ملخص المحتوى في الصفحة رقم 19
VI. BATTERIES AND CHARGING BATTERIES AND CHARGING Your power chair uses two long-lasting, 12-volt, deep-cycle batteries. These batteries are sealed and maintenance free. Since they are sealed, there is no need to check the electrolyte (fluid) level. Deep-cycle batteries are designed to handle a longer and deeper discharge. Though they are similar in appearance to automotive batteries, they are not interchangeable. Automotive batteries are not designed to handle a long, deep discharge, and also a
ملخص المحتوى في الصفحة رقم 20
VI. BATTERIES AND CHARGING To charge the batteries using the off-board charger: 1. Position the front of your power chair next to a stan- dard electrical outlet. See figure 17. XLR 2. Be certain the controller power is turned off and the freewheel levers are in the engaged position. See III. “Your Power Chair.” 3. Plug the off-board charger into the off-board char- ger/programming socket on the controller. See fig- ure 17. 4. Plug the off-board charger into the electrical outlet. WARNING! The LE
