ملخص المحتوى في الصفحة رقم 15
15 www.polaroid.com
ملخص المحتوى في الصفحة رقم 16
16 www.polaroid.com
ملخص المحتوى في الصفحة رقم 17
17 www.polaroid.com
ملخص المحتوى في الصفحة رقم 18
3. Polaroid Display Cell Defect Specification In some cases, a panel may have defective cells that cannot be controlled. These defective cells can be categorized into two types; (1) Non-lighting or dark cell defect: defect in which the cell is always off (2) Non-extinguishing or bright cell defect: defect in which the cell is always on The Polaroid Display Cell Defect Specifications below define the allowed limits for display cell defects and are used as the criteria in determining wh
ملخص المحتوى في الصفحة رقم 19
4. Before Returning This Product to the User Before returning this product to the user, always perform the following safety checks: (1) Inspect all wiring to be sure no wires are pinched between the chassis or any metal parts. (2) Inspect all protective devices for proper installation, including non-metallic controls, insulation materials, cabinet backs, compartment covers, and shields. (3) Verify that no shock hazard exists on any part of the chassis, especially any metal components incl
ملخص المحتوى في الصفحة رقم 20
5. Disassembly Procedure Note: Before disassembly of any part the TV, make sure the power is OFF, and the power cord is removed from the wall outlet. Allow time for power within all system boards to discharge before you begin disassembly. Never insert any objects into the vent holes in the TV case. Note: Before returning this product to the end user, you must follow the steps outlined in the section, Before Returning This Product to the User, on page 19. This procedure ensures that the
ملخص المحتوى في الصفحة رقم 1
2006 LCD Models – North America
FLM-2632, FLM-2632M, FLM-2634B, FLM-3232, FLM-3232M, FLM-323B,
FLM-3234B, FLM-3732, FLM-3732M, FLM-373B, FLM-3734B, FLX-374
SERVICE MANUAL
Bezel covers vary by model
20070411
ملخص المحتوى في الصفحة رقم 2
Important Service and Safety Information Prior to using this service manual, please ensure that you have carefully followed all the procedures outlined in the user's manual for this product. (1) Read all of these instructions. (2) Save these instructions. (3) Follow all warnings and instructions marked on the product. (4) Unplug this product from the wall outlet bef
ملخص المحتوى في الصفحة رقم 3
Important Service and Safety Information Service work should be performed only by qualified service technicians familiar with all safety checks and these service guidelines: ELECTRIC SHOCK HAZARD Always disconnect AC power before servicing! Never modify any circuit! Never insert any objects into the holes in the TV case! ELECTROSTATIC DISCHARGE (ESD) Components inside an LCD or plasma TV are sensitive to static electricity. Before servicing the TV, follow these guidelines: • Av
ملخص المحتوى في الصفحة رقم 4
(1) Always use a dedicated soldering bit for different types of solder. If a different type of solder comes in contact with a lead-free solder bit, subsequent solder joints will no longer be lead free. Always clean the soldering bit after every use. (2) Keep the soldering bit in contact with the just long enough to confirm a good solder joint. Leaving the bit in contact with parts for an extended period may damage the components. (3) Because lead-free solder contains a higher concentration
ملخص المحتوى في الصفحة رقم 5
Table of Contents 1. Operation ....................................................................................................................................... 6 2. Troubleshooting / Flow Charts ....................................................................................................... 14 3. Polaroid Display Cell Defect Specification ........................................................................................ 18 4. Before Returning This Product to the User ....
ملخص المحتوى في الصفحة رقم 6
1. Operation 6 www.polaroid.com
ملخص المحتوى في الصفحة رقم 7
7 www.polaroid.com
ملخص المحتوى في الصفحة رقم 8
Original Remote Control 8 www.polaroid.com
ملخص المحتوى في الصفحة رقم 9
9 www.polaroid.com
ملخص المحتوى في الصفحة رقم 10
New Remote Control 10 www.polaroid.com
ملخص المحتوى في الصفحة رقم 11
Factory Mode Procedure 1. Power on TV. 2. Press volume up and channel up buttons on the TV simultaneously and release. 3. Power off TV with remote or power button to exit. 11 www.polaroid.com
ملخص المحتوى في الصفحة رقم 12
The operation of each OSD control is described in the following table: Menu Options Sub-Options Function and Description Vivid →Hi-Bright Press repeatedly for different picture VIDEO Picture Mode →Cinema modes: Vivid →Hi-Bright →Cinema →Sport →Sport →User. →User. Contrast 0…100 (75) Fine tune the contrast. Brightness 0…100 (50) Fine tune the brightness. Saturation 0…100 (50) Fine tune the contrast. Hue -30…+30 (0) Fine tune the contrast. Sharpness 0…7 (4) Fine tune the contrast. Co
ملخص المحتوى في الصفحة رقم 13
Closed Caption C1,C2,C3,C4,T1,T2, Set the closed caption mode. TT4,and Off V-chip Input Password Input the 4-digit password. “0000” Block MPAA Rating Set the input source that you want to lock. Block TV Rating Input the old password first, and then input the new password. Block MPAA Unrated Block all unrated movies. Block TV None Rating Block all unrated TV programs. Reset Reset to default Reset the items in the setup menu value. except the protected items. Audio Language To set t
ملخص المحتوى في الصفحة رقم 14
2. Troubleshooting / Flow Charts Note: Reseat all cables, check fuse by AC plug, perform a clear or reset in factory mode and retest before ordering parts. Can’t power on your TV? This TV is equipped with a safety fuse. In the event of an electrical storm or power outage the safety fuse is designed to protect your TV. If your TV has no power, check the fuse by prying the cover off, following the illustration below. If the fuse is blown, visit your local hardware store and ask for a
