ملخص المحتوى في الصفحة رقم 1
855 AB CRUNCH BENCH
WARNING:
Read and follow all directions
for each step to insure proper
assembly of this product.
USER’S GUIDE
CLASS H 1 Version: 855108
PART # 7303901 Revision: 06/18/02
REV . A
ملخص المحتوى في الصفحة رقم 2
TABLE OF CONTENTS Safety Statement.............2 Assembly Instructions.....4-6 General Notes..................3 General Maintenance.......7 Tools Required................3 Warranty Statement..........8 Parts list...........................4 Product Services..............9 Insert-Registration Card IMPORTANT SAFETY INFORMATION THERE IS A RISK ASSUMED BY INDIVIDUALS WHO USE THIS TYPE OF EQUIPMENT. TO MINIMIZE RISK FOLLOW THESE RULES! 1. Before using, read all the warnings and instructions 6. Neve
ملخص المحتوى في الصفحة رقم 3
IMPORTANT NOTES Please note: * Thank you for purchasing the ParaBody 855 AB Crunch Bench. Please read these instructions thoroughly and keep them for future reference. This product must be assembled on a flat, level surface to assure its proper function. * This product must be assembled on a flat, level surface to assure its proper function. DO NOT securely tighten any frame connections until the entire frame has been assembled, unless otherwise stated. Tools Required for Assembly
ملخص المحتوى في الصفحة رقم 4
PARTS LIST KEY DESCRIPTION QTY KEY PART # QTY PART # DESCRIPTION 1 BENCH FRAME 1 7 LEA6405201 4 LEA6560109 2” SQ. END CAP 2 TUBE 1 8 LEA6125101 2 LEA6560009 3/4 X 16” TUBE 3 PAD ASSEMBLY 1 9 LEA6194601 4 LEA6597421 ROLLER PAD LEA3105401 4 3/8” LOCK WASHER 2 10 4 LEA3114502 STARLOCK COLLAR 5 3/8” LOCK NUT 2 11 LEA6675709 1 LEA3114702 TUBE 6 3/8 X 2-3/4” BOLT 4 LEA3235211 1 2 3/8 X 2-3/4” 6 5 7 11 FIGURE 1 STEP 1: • Insert four 2” SQ. END CAPS (7) into the ends of the TUBES (2)&(11) as s
ملخص المحتوى في الصفحة رقم 5
3 1 4 6 3/8 X 2-3/ 4” FIGURE 2 STEP 2: • SECURELY assemble the PAD (3) to the BENCH FRAME (1) using two 3/8” X 2-3/4” BOLTS (6), two 3/8” LOCK WASHERS (4). See FIGURE 2. 1/2 1/2 1/2 1/2 1/2 1/2 0 1 34 5 2 6 5
ملخص المحتوى في الصفحة رقم 6
1 8 9 10 FIGURE 3 STEP 3: • Slide the four ROLLER PADS (9) onto two 3/4 X 16” TUBES (8) using four STARLOCK COLLARS (10) as shown in FIGURE 3. THIS CONCLUDES THE ASSEMBLY OF THE 855 AB CRUNCH BENCH 6
ملخص المحتوى في الصفحة رقم 7
MAINTENANCE Please note: * We recommend cleaning your product (pads and frame) on a regular basis, using warm soapy water. Touch-up paint can be purchased from your ParaBody customer service representative at (800) 328-9714. * Inspect equipment daily. Tighten all loose connections are replace worn parts immediately. Failure to do so may result in serious injury * PLEASE RECORD THE INFORMATION REQUESTED BELOW. IN THE EVENT YOU MAY NEED SERVICE YOU WILL BE ASKED FOR THIS INFORMATION
ملخص المحتوى في الصفحة رقم 8
LIMITED WARRANTY ParaBody extends the following LIMITED WARRANTY to the original owner of the ParaBody products. The Warranty terms apply to IN HOME USE ONLY. 1. LIMITED WARRANTY ON FRAME AND WELDS. If the frame of the ParaBody product or a weld should crack or break, it will be repaired or replaced by ParaBody. Terms: Lifetime – for so long as the Customer owns the ParaBody product. 2. LIMITED WARRANTY ON PARTS. If the following parts are defective in material or workmanship, ParaBody will
ملخص المحتوى في الصفحة رقم 9
LIFE FITNESS 14150 Sunfish Lake Blvd. Ramsey Minnesota, 55303 U.S.A. Tel: 763.323.4500 Fax: 763.323.4797 800.328.9714 (Toll-free within the U.S. and Canada) www.parabody.com INTERNATIONAL OFFICES Life FitnessAtlantic BV Life Fitness (UK) Ltd. Atlantic Headquarters Queen Adelaide Bijdorpplein 25-31 Ely, Cambs CB7 4UB 2992 LB Barendrecht United Kingdom The Netherlands Phone CSS: (01353) 665507 Phone: (180) 646 666 Fax CSS: (01353) 666719 Fax: (180) 646 703 Life Fitness EUROPE GmbH Lif
