Oregon Scientific Advanced Weather Station WMR100 دليل المستخدم

ملخص المحتوى في الصفحة رقم 1

QUICK START GUIDE SET-UP MAIN UNIT
WMR100 ADVANCED WEATHER STATION B
with Wireless Sensor Set and Mounting Package
1 2 3
UNPACK
A
Make sure that you have all of the parts shown here before
the installation of the Advanced Weather Station.
MAIN UNIT RAIN GAUGE
1 Install 4 AA batteries located 2 Install power plug into the base station 3 Press the RESET button.
underneath the base unit. and insert the AV adapter into the wall
Filter
1× outlet.
Rain Collector Screws (Type C)
1× 3×
WMR100 Base 6V

ملخص المحتوى في الصفحة رقم 2

SET-UP RAIN GAUGE SET-UP POLE D E 5 1 2 3 1 3 Option 1—With mounting pole Screw off the included nut and bolt from the plastic base. 1 2 Remove the round pole cover in the middle of the plastic base. 5 3 Insert the bottom pole until the screw hole aligns with the plastic base. Re-insert the nut and bolt and fasten. Screw the “cone shape” end clockwise 4 onto the bottom pole. 6 4 Use the guiding end to start inserting bottom pole at a perpendicular angle into the ground. 5 Place a wooden block