ملخص المحتوى في الصفحة رقم 7
When the battery pack requires recharging, a 3-5 hour charge allows the tool to REMOVING/ATTACHING BATTERY PACK operate at full power. A charging indicator light on the charger will illuminate to REMOVE BATTERY PACK: show that charging is taking place. 1. Press both release buttons on either side of the Cordless Drill to release the battery pack. CHARGING BATTERY PACK 2. Pull battery pack free of Cordless Drill. BATTERY PACK CHARGE BATTERY PACK: ATTACH BATTERY PACK: 1. Make sure the trigger
ملخص المحتوى في الصفحة رقم 8
INSTALLING DRILL BIT INTO KEYLESS CHUCK VARIABLE SPEED TRIGGER SWITCH WARNING THIS TOOL IS CONTROLLED BY A TRIGGER SWITCH: Before inserting a drill bit or other accessory, make sure the forward/reverse • The speed of the Cordless Drill depends and trigger lock lever is in the center “OFF” position to prevent accidental starts on the amount of pressure you put on the that may result in injury. trigger. TRIGGER Do not attempt to tighten drill bits (or any other accessory) by gripping the SWITCH
ملخص المحتوى في الصفحة رقم 9
TORQUE SETTINGS SCREWDRIVING WHEN DRIVING FASTENERS: To prevent damaging the tool or driving screw too deep • Always start slowly and gradually increase the speed of the Drill. into work piece, release the trigger when you feel the clutch slip. • Release the trigger when you feel the clutch slip. CONTROL RING • Always keep the driver bit straight to prevent damage to the screw. THE CONTROL RING ADJUSTS THE LEVEL OF TORQUE: • For light duty work, use lower settings. • Hold the Drill with both h
ملخص المحتوى في الصفحة رقم 10
• Just before the drill tip breaks though the other side of the work piece drill more Regularly clean the ventilation slots in your tool and charger using only a soft slowly and decrease pressure on the tool. This will prevent stalling and leave a brush or dry cloth. cleaner hole. Never open the Cordless Drill case, battery pack or charger. Do not attempt to • Use a block of wood to back up work pieces that may splinter. repair the Cordless Drill, battery pack or charger yourself. Opening any of
ملخص المحتوى في الصفحة رقم 11
SPECIAL WARRANTY NOTE TO CONTRACTORS AND COMMERCIAL USERS: This SPECIFICATIONS Kawasaki™ portable power tool is offered as a home use tool and carries a HOME SPECIFICATIONS USE WARRANTY. This tool is made for home use in the execution of Voltage 19.2V projects and repairs in and around the home. Use of the tool for COMMERCIAL No Load Low Speed 0-400/min. PURPOSES OR ON A JOBSITE is not covered under this warranty. No Load High Speed 0-1100/min. The date of purchase shall be the date of shipme
ملخص المحتوى في الصفحة رقم 12
conforming item and/or part thereof shall constitute fulfillment of all EXCLUSION AND DISCLAIMER OF ALL IMPLIED WARRANTIES, INCLUDING THE obligations to the purchaser. Alltrade shall not be responsible or liable for any IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR expense, including freight charges, or repairs made outside Alltrade’s facility, unless PURPOSE. NO WARRANTY, ORAL OR WRITTEN, OTHER THAN THE ABOVE expressly agreed to by Alltrade in writing. Under no circumstanc
ملخص المحتوى في الصفحة رقم 13
COMPONENT #840055 19.2V BATTERY-OPERATED JIGSAW INSTRUCTION MANUAL THIS MANUAL CONTAINS IMPORTANT INFORMATION REGARDING SAFETY, OPERATION, MAINTENANCE AND STORAGE OF THIS PRODUCT. BEFORE USE, READ CAREFULLY AND UNDERSTAND ALL CAUTIONS, WARNINGS, INSTRUCTIONS AND PRODUCT LABELS. FAILURE TO DO SO COULD RESULT IN SERIOUS PERSONAL INJURY AND/OR PROPERTY DAMAGE. FOR CUSTOMER SERVICE IF YOU SHOULD HAVE ANY QUESTIONS OR EXPERIENCE A PROBLEM WITH YOUR ALLTRADE 87-1904-60957 POUR LE SERVICE APRÉS VENTE
ملخص المحتوى في الصفحة رقم 14
SECTION FIVE TABLE OF CONTENTS 2 YEAR LIMITED WARRANTY . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 17-20 CONGRATULATIONS! . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2 INTENDED USE . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2 CONGRATULATIONS! SECTION ONE Thanks for choosing this product. At Alltrade, our aim is to provide you with quality GENERAL SAFETY RULES – FOR ALL BATTERY OPERATED TOOL
ملخص المحتوى في الصفحة رقم 15
WORK AREA WARNING indicates a potentially hazardous situation which, if not avoided, could result in death or serious injury. Keep your work area clean and well lit. Cluttered work benches and dark work CAUTION indicates a potentially hazardous areas may cause accidents or injury. situation which, if not avoided, may result in minor or moderate injury. Do not operate power tools in explosive areas, such as in the presence of flammable liquids, gases or dust. Power tools create sparks which ma
ملخص المحتوى في الصفحة رقم 16
PERSONAL SAFETY When battery pack is not in use, keep it away from other metal objects like: paper clips, coins, keys, nails, screws, or other small metal objects that can Stay alert, watch what you are doing, and use common sense when operat- make a connection from one terminal to another. Shorting the battery termi- ing a power tool. Do not use tool while tired or under the influence of drugs, nals together may cause sparks, burns or a fire. alcohol or medication. A moment of inattention while
ملخص المحتوى في الصفحة رقم 17
SYMBOLS IMPORTANT: Some of the following symbols may be used on your tool. Please When using the Cordless Jigsaw, always maintain a firm grip on the tool with study them and learn their meaning. Proper interpretation of these symbols will both hands. Never put your hands or feet in the sanding area. Do not grasp the allow you to operate the tool better and safer. tool or place your hands too close to the blade. Keep your hands well away from the sanding disk. Never reach underneath the tool whil
ملخص المحتوى في الصفحة رقم 18
FUNCTIONAL DESCRIPTION BATTERY 14 2 13 Before using battery pack, please read carefully all instruc- 16 tions and cautionary markings on battery pack, battery charger and product using battery. 15 3 ® 5 Do not incinerate the battery pack even if it is severely 8 7 damaged or is completely worn out. The battery pack can 6 explode. 12 Do not carry battery packs in aprons, pockets, or tool boxes, product kit 4 boxes, drawers, etc. with loose metal objects. Battery pack terminals could 1 10 be shor
ملخص المحتوى في الصفحة رقم 19
When the battery pack requires recharging, a 3-5 hour charge allows the tool to REMOVING / ATTACHING BATTERY PACK operate at full power. A charging indicator light on the charger will illuminate to REMOVE BATTERY PACK: show that charging is taking place. 1. Press both release buttons on either CHARGING BATTERY PACK side of the Cordless BATTERY PACK CHARGE BATTERY PACK: Jigsaw to release the 1. Make sure the trigger battery pack. on the Cordless Jigsaw 2. Pull battery pack free of 120V AC
ملخص المحتوى في الصفحة رقم 1
COMPONENT
#840055
19.2V 2-SPEED
BATTERY-OPERATED DRILL
INSTRUCTION MANUAL
THIS MANUAL CONTAINS IMPORTANT INFORMATION REGARDING SAFETY, OPERATION,
MAINTENANCE AND STORAGE OF THIS PRODUCT. BEFORE USE, READ CAREFULLY AND
UNDERSTAND ALL CAUTIONS, WARNINGS, INSTRUCTIONS AND PRODUCT LABELS. FAILURE TO DO
SO COULD RESULT IN SERIOUS PERSONAL INJURY AND/OR PROPERTY DAMAGE.
FOR CUSTOMER SERVICE
IF YOU SHOULD HAVE ANY QUESTIONS OR EXPERIENCE A PROBLEM WITH YOUR ALLTRADE
87-1904-60957
POUR LE SERVICE APR
ملخص المحتوى في الصفحة رقم 2
SECTION FOUR TABLE OF CONTENTS MAINTENANCE AND CLEANING . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 17-18 CONGRATULATIONS! . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2 ACCESSORIES . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 18 INTENDED USE . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2 SPECIFICATIONS . . . . . . . . . . . . . . . . . . . . . . . . . . .
ملخص المحتوى في الصفحة رقم 3
WORK AREA DANGER indicates an imminently hazardous situation which, if not avoided, will result in death or serious injury. Keep your work area clean and well lit. Cluttered work benches and dark work WARNING indicates a potentially hazardous areas may cause accidents or injury. situation which, if not avoided, could result in death or serious injury. Do not operate power tools in explosive areas, such as in the presence of flammable liquids, gases or dust. Power tools create sparks which may
ملخص المحتوى في الصفحة رقم 4
PERSONAL SAFETY Recharge only with the charger specified by the manufacturer. A charger that is suitable for one type of battery pack may create a risk of fire when used with Stay alert, watch what you are doing, and use common sense when operat- another battery pack. ing a power tool. Do not use tool while tired or under the influence of drugs, Use power tools only with specifically designated battery packs. Use of any alcohol or medication. A moment of inattention while operating power tools o
ملخص المحتوى في الصفحة رقم 5
SPECIFIC SAFETY RULES AND/OR SYMBOLS SYMBOLS IMPORTANT: Some of the following symbols may be used on your tool. Please Hold tool by insulated gripping surfaces when per- study them and learn their meaning. Proper interpretation of these symbols will forming an operation where the cutting tool may contact hidden wiring. allow you to operate the tool better and safer. Contact with a “live” wire will also make exposed metal parts of the tool SYMBOL NAME EXPLANATION “live” and shock the operator. V
ملخص المحتوى في الصفحة رقم 6
FUNCTIONAL DESCRIPTION BATTERY 9 Before using battery pack, please read carefully all instruc- tions and cautionary markings on battery pack, battery 6 charger and product using battery. 8 7 ® Do not incinerate the battery pack even if it is severely 10 12 5 14 damaged or is completely worn out. The battery pack can explode. Do not carry battery packs in aprons, pockets, or tool boxes, product kit boxes, drawers, etc. with loose metal objects. Battery pack terminals could be short circuited cau
ملخص المحتوى في الصفحة رقم 20
1. Loosen the two screws GENERAL CUTTING on the blade holder LOOSEN by turning them counter- clockwise. Push the Always hold the saw in front of you and away from your body. Keep your blade shank into the saw hands and feet well away from the work piece. blade holder as far as it will go. Make sure TIGHTEN Never feed the blade into the work piece until the blade is at full speed. that the blade’s teeth If the blade is not at full speed, the saw may kick back causing serious are facing fo
