INSTEON 2452-422 دليل المستخدم

ملخص المحتوى في الصفحة رقم 1

Quick Start Guide
®
INSTEON DIN Rail Dimmer
Sense #2
Sense #1
Connected
Models: 2452-222, 2452-422, 2452-522
load
Tools Needed
• Slotted #1 screwdriver • Voltage meter
• Wire cutter/stripper
LED
Paddle top
Installing INSTEON DIN Rail
(on/brighten)
Installation should only be performed by a qualified electrician or a homeowner
Fuse
who is familiar and comfortable with electrical circuitry. If you have questions,
consult an electrician or call the INSTEON Support Line at 866

ملخص المحتوى في الصفحة رقم 2

d) Perform the step that applies • For single momentary: slowly tap set button four times LED will continue blinking green • For dual momentary: slowly tap set button five times LED will start double-blinking green • To switch back to latching: slowly tap set button six times LED will start blinking green e) Once the mode is selected, press and hold set button until it double-beeps LED will stop blinking and turn green if load is on or red if load is off Make DIN Rail a Responder C