ملخص المحتوى في الصفحة رقم 1
Operator’s manual (EPA)
324R
X-SERIES
Please read the operator’s manual carefully and make sure you
understand the instructions before using the machine.
E E E En n n ng g g glllliiiis s s sh h h h
ملخص المحتوى في الصفحة رقم 2
15 m 50FT KEY TO SYMBOLS Symbols Only use non-metallic, flexible cutting attachments, i.e. trimmer heads with trimmer cord. WARNING! Careless or incorrect use can result in serious or fatal injury to the operator or others. Other symbols/decals on the machine refer to special Please read the operator’s manual carefully certification requirements for certain markets. and make sure you understand the instructions before using the machine. Switch off the engine by moving the stop Alwa
ملخص المحتوى في الصفحة رقم 3
CONTENTS Contents Note the following before starting: KEY TO SYMBOLS Husqvarna AB has a policy of continuous product development and therefore reserves the right to modify the Symbols ....................................................................... 2 design and appearance of products without prior notice. CONTENTS Contents ...................................................................... 3 Maintenance, replacement, or repair of the emission control
ملخص المحتوى في الصفحة رقم 4
SAFETY INSTRUCTIONS CLOTHING Personal protective equipment Wear clothes made of a strong fabric and avoid loose clothing that can catch on twigs and branches. Always wear heavy, IMPORTANT! You must use approved personal protective long pants. Do not wear jewellery, shorts sandals or go equipment whenever you use the machine. Personal barefoot. Secure hair so it is above shoulder level. protective equipment cannot eliminate the risk of injury but FIRST AID KIT it will red
ملخص المحتوى في الصفحة رقم 5
SAFETY INSTRUCTIONS Cutting attachment guard Quick release This guard is intended to prevent loose objects from being There is an easily accessible, quick release fitted at the front thrown towards the operator. The guard also protects the as a safety precaution in case the engine catches fire, or in operator from accidental contact with the cutting attachment. any other situation that requires you to free yourself from the machine and harness. See instructions under the hea
ملخص المحتوى في الصفحة رقم 6
SAFETY INSTRUCTIONS Checking, maintaining and servicing WARNING! Bear in mind that: Engine exhaust fumes contain carbon monoxide, ′′ the machine′′s safety equipment ! which can cause carbon monoxide poisoning. For this reason you should not start or run the machine indoors, or IMPORTANT! anywhere that is poorly ventilated. All servicing and repair work on the machine requires The exhaust fumes from the engine are hot special training. This is especially true of the ma
ملخص المحتوى في الصفحة رقم 7
SAFETY INSTRUCTIONS • See instructions under the heading Start. Start the • Check that the vibration damping element is undamaged machine and apply full throttle. Release the throttle and and securely attached. check that the cutting attachment stops and remains at a standstill. If the cutting attachment rotates with the throttle in the idle position then the carburettor idle setting must be checked. See instructions under the heading Maintenance. Muffler • Never use a machine
ملخص المحتوى في الصفحة رقم 8
SAFETY INSTRUCTIONS 2 Keep the teeth of the blade correctly sharpened! Follow • Tighten the nut using the socket spanner. 35-50 Nm (3.5- our instructions and use the recommended file gauge. An 5 kpm). incorrectly sharpened or damaged blade increases the risk of accidents. CAUTION! The nylon lining inside the locking nut must not be so worn that you can turn it by hand. The lining should offer a resistance of at least 1.5 Nm. The nut should be replaced after it has been put o
ملخص المحتوى في الصفحة رقم 9
SAFETY INSTRUCTIONS • Make sure that the blade is well supported when you file • Smaller machines generally require small trimmer heads it. Use a 5.5 mm round file with a file holder. and vice versa. This is because when clearing using a cord the engine must throw out the cord radially from the trimmer head and overcome the resistance of the grass being cleared. • The length of the cord is also important. A longer cord requires greater engine power than a shorter cord of the sam
ملخص المحتوى في الصفحة رقم 10
SAFETY INSTRUCTIONS • Place the machine on the ground, ensure the cutting General safety precautions attachment is clear of twigs and stones. Hold the body of the machine on the ground using your left hand (CAUTION! Not with your foot). Then grip the starter IMPORTANT! handle with your right hand and pull the starter cord. The machine is only designed for trimming grass, grass clearing and/or forestry clearing. The only accessories you can operate with this engine unit are th
ملخص المحتوى في الصفحة رقم 11
SAFETY INSTRUCTIONS • The transport guard must always be fitted to the cutting Adjusting the harness and clearing saw attachment when the machine is being transported or in storage. WARNING! Take care when handling fuel. Bear in mind the risk of fire, explosion and WARNING! When using a clearing saw it ! inhaling fumes. must always be hooked securely to the ! harness. Otherwise you will be unable to control the clearing saw safely and this can General working instructions result
ملخص المحتوى في الصفحة رقم 12
SAFETY INSTRUCTIONS Correct balance WARNING! Avoid cutting with the area of the blade between the 12 o’clock and 3 o’clock Let the cutting attachment rest lightly on the ground. If you ! positions. Because of the speed of rotation use a saw blade it should balance about 10 cm above the of the blade kickback can occur if you ground to prevent contact with stones and the like. Adjust the attempt to cut thick stems with this area of position of the support hook to balance the clearing saw
ملخص المحتوى في الصفحة رقم 13
SAFETY INSTRUCTIONS Grass clearing using a grass blade WARNING! Watch out for thrown objects. Always wear eye protection. Never lean over ! the cutting attachment guard. Stones, rubbish, etc. can be thrown up into the eyes causing blindness or serious injury. • Grass blades and grass cutters must not be used on woody stems. Keep unauthorised persons at a distance. Children, animals, onlookers and helpers • A grass blade is used for all types of tall or coarse grass. should be kept outside
ملخص المحتوى في الصفحة رقم 14
SAFETY INSTRUCTIONS Cutting • The trimmer is ideal for cutting grass that is difficult to reach using a normal lawn mower. Keep the cord parallel to the ground when cutting. Avoid pressing the trimmer head against the ground as this can ruin the lawn and damage the tool. • Do not allow the trimmer head to constantly come into contact with the ground during normal cutting. Constant contact of this type can cause damage and wear to the trimmer head. Sweeping • The fan effect of the rotating
ملخص المحتوى في الصفحة رقم 15
WHAT IS WHAT? What is what on the clearing saw? 1 Blade 17 Handle adjustment 2 Grease filler cap, bevel gear 18 Locking nut 3 Bevel gear 19 Support flange 4 Cutting attachment guard 20 Support cup 5 Shaft 21 Drive disc 6 Handlebar 22 Trimmer head 7 Throttle control 23 Socket spanner 8 Stop switch 24 Operator’s manual (EPA) 9 Throttle lock 25 Transport guard 10 Suspension 26 Allen key 11 Cylinder cover 27 Locking pin 12 Starter handle 28 Harness 13 Fuel tank 29 Start throttle button 14 Choke contro
ملخص المحتوى في الصفحة رقم 16
ASSEMBLY Fitting the handlebar Transport position, handlebar • Remove the screw at the rear of the throttle handle. • The handlebar can easily be turned to fit along the shaft for easier transportation and storage. • Slide the throttle handle onto the right side of the handlebar, (see diagram). • Loosen the knob. Turn the handlebar clockwise so that the throttle handle rests against the engine. • Now twist the handlebar around the shaft. Tighten the knob. • Fit the transport guard to the cutt
ملخص المحتوى في الصفحة رقم 17
ASSEMBLY Fitting a blade guard, grass blade Fitting the blade guard and saw and grass cutter blade G K F J E D H I A A B C L • Remove the mounting plate (H). Fit the adapter (I) and bracket (J) with the two screws (K) as shown. Fit the blade guard (A) to the adapter using the 4 screws (L) as shown. CAUTION! Use the recommended blade guard. See the • Hook the blade guard/combination guard (A) onto the Technical data section. fitting on the shaft and secure with the bolt. G CAUTION! Use th
ملخص المحتوى في الصفحة رقم 18
ASSEMBLY arrow in the diagram shows the area where you should • Fit the bottom half of the trimmer head (K) to the cover (I) operate the socket spanner when loosening or tightening by pressing them together, with the cut-outs on the bottom the nut. half aligned with the catches on the cover. • To dismantle, follow the instructions in the reverse order. Fitting a trimmer guard and Fitting other guards and cutting Superauto II 1" trimmer head attachments K • Fit the trimmer guard/combination g
ملخص المحتوى في الصفحة رقم 19
ASSEMBLY Correct balance Adjusting the harness and clearing Let the cutting attachment rest lightly on the ground. If you saw use a saw blade it should balance about 10 cm above the ground to prevent contact with stones and the like. Adjust the WARNING! When using a clearing saw it position of the support hook to balance the clearing saw must always be hooked securely to the correctly. ! harness. Otherwise you will be unable to control the clearing saw safely and this can result in inju
ملخص المحتوى في الصفحة رقم 20
FUEL HANDLING When the oil level is low, top up using engine oil to the edge Fuel of the oil refill hole. CAUTION! The machine is equipped with a four-stroke engine. Make sure that there is always sufficient oil in the oil tank. WARNING! Always ensure there is adequate ventilation when handling fuel. ! Only use recommended engine oil. The catalytic converter muffler gets very hot Fuelling during and after use. This also applies during idling. Be aware of the fire hazard, especially when wor
