Havis-Shields WGI-D23-1 & 6 دليل المستخدم

ملخص المحتوى في الصفحة رقم 1

INSTALL INSTRUCTIONS WGI-D23-1 & 6
INTERIOR WINDOW GUARDS
2006-2007 DODGE CHARGER

TOOLS REQUIRED:
Power drill T-25 tamperproof torx bit
Drill bits – 1/8”, 5/32” Phillips screwdriver

HARDWARE:
QTY DESCRIPTION PART #
2 Upper mounting bracket WGI-MB-12-90
8 #10 x ¾” Sheet metal screw GSM33195
8 #10 x ½” Sheet metal screw GSM33194
4 ¼” x ½” T-25 Tamperproof bolts GSM34190
4 ¼” Flat Washers GSM31005

Always!
Read all instructions before installing any Havis-Shields Equipment Co

ملخص المحتوى في الصفحة رقم 2

INSTALL WINDOW GUARDS • Loosely attach upper mounting bracket to window guard using ¼” x ½” tamper proof screws and flat washers. (This step may already be done during shipping) • Position screen to vehicle as shown in photo #2. • Make sure you have the window guard centered on the door. • Mark, drill 1/8” holes, and attach lower mount using #10 x ½” screws as shown in photo #3. Note: Be sure the upper mounting brackets go under weather stripping and the notches go around the moun