ملخص المحتوى في الصفحة رقم 1
OPERATOR'S MANUAL
NETWORK SOUNDER
DFF3
MODEL
www.furuno.co.jp
ملخص المحتوى في الصفحة رقم 2
IMPORTANT NOTICES • The descriptions in this manual are intended for readers with a solid knowledge of English. • No part of this manual may be copied or reproduced without written permission. • If this manual is lost or worn, contact your dealer about replacement. • The contents of this manual and equipment specifications are subject to change without notice. • Store this manual in a convenient place for future reference. • FURUNO will assume no responsibility for the damage caused by improper
ملخص المحتوى في الصفحة رقم 3
SAFETY INSTRUCTIONS The user and installer must read the appropriate safety instructions before attempting to install or operate the equipment. Indicates a potentially hazardous situation which, if not avoided, WARNING could result in death or serious injury. Indicates a potentially hazardous situation which, if not avoided, CAUTION may result in minor or moderate injury. Warning, Caution Prohibitive Action Mandatory Action Safety instructions for the operator WARNING WARNING Do not ope
ملخص المحتوى في الصفحة رقم 4
SAFETY INSTRUCTIONS Safety instructions for the installer WARNING CAUTION CAUTION The transducer cable must be handled Do not open the equipment. carefully, following the guidelines below. Only qualified personnel should work inside the equipment. • Keep fuels and oils away from the cable. Turn off the power before beginning • Locate the cable away from chemicals. the installation. • Locate the cable away from locations where it might be damaged. Fire or electrical shock can result
ملخص المحتوى في الصفحة رقم 5
TABLE OF CONTENTS FOREWORD ....................................................................................................................v SYSTEM CONFIGURATION ..........................................................................................vi 1. MOUNTING ...............................................................................................................1 1.1 Equipment Lists.................................................................................................
ملخص المحتوى في الصفحة رقم 6
FOREWORD A Word to the Owner of the DFF3 Congratulations on your choice of the FURUNO DFF3 Network Sounder. We are confident you will see why the FURUNO name has become synonymous with quality and reliability. For 60 years FURUNO Electric Company has enjoyed an enviable reputation for quality marine electronics equipment. This dedication to excellence is furthered by our extensive global network of agents and dealers. This equipment is designed and constructed to meet the rigorous demands of
ملخص المحتوى في الصفحة رقم 7
SYSTEM CONFIGURATION Basic configuration shown with solid line. NavNet Series NavNet 3D Series * HUB-100 (For NavNet) HUB* HUB-101 (For NavNet 3D) Network Sounder DFF3 DFF3 NETWORK SOUNDER ST-BY 12-24 VDC Rectifier PR-62 Speed/Temperature Sensor ST-02MSB ST-02PSB 100/110/115/ Temperature Sensor 220/230 VAC T-02MTB 1φ, 50/60 Hz T-02MSB T-03MSB High Low Freq. Freq. Transducer Transducer vi
ملخص المحتوى في الصفحة رقم 8
1. MOUNTING 1.1 Equipment Lists Standard supply Name Type Code No. Qty Remarks Network Sounder DFF3 — 1 Spare Parts SP02-05601 001-033-740 1 set Fuse Installation Materials CP02-08500 000-011-917 1 set - Power cable (3.5 m) - LAN cable (5 m for NavNet 3D) - Self-tapping screws Optional supply Name Type Code No. Remarks Transducer 1/2/3kW available. See — next page for choices. Thru-hull pipe — Tank — Cable Assembly MJ-A6SPF0017-010C 001-159-704-10 1 m, for NavNet MJ-A6SPF0017-050C 001-159-705-10
ملخص المحتوى في الصفحة رقم 9
1. MOUNTING Transducer, thru-hull pipe and tank combinations Output Frequency Thru-hull Ship type Transducer Tank (W) (kHz) pipe 1k/1k 28/50 Steel 28F-8 TWB-6000(2) T-656 50B-9B FRP - - 28/88 Steel 28F-8 TWB-6000(2) T-657 88B-8 FRP - - 50/88 Steel 50B-9B TWB-6000(2) T-658 88B-8 FRP - - 50/200 Steel 50/200-1T or TFB-5000(1) T-603 FRP 50/200-1ST - T-603F Steel 50/200-12M - - FRP - - 1k/2k 28/200 Steel 28F-8 TWB-6000(2) T-657 200B-8/8B FRP - - 50/200 Steel 50B-9B TWB-6000(2) T-658 200B-8/8B FRP -
ملخص المحتوى في الصفحة رقم 10
1. MOUNTING Output Frequency Thru-hull Ship type Transducer Tank (W) (kHz) pipe 2k/2k 28/50 Steel 28F-18 TFB-7000(2) T-634 50B-12 FRP TRB-1100(2) T-634-F 28/82 Steel 28F-18 TFB-7000(2) T-636 82B-35R FRP TRB-1100(2) T-636-F 28/88 Steel 28F-18 TFB-7000(2) T-636 88B-10 FRP TRB-1100(2) T-636-F 28/200 Steel 28F-18 TFB-7000(2) T-638 200B-8/8B FRP TRB-1100(2) T-638-F Steel 28BL-6HR TFB-7000(2) T-693 200B-8/8B FRP TRB-1100(2) T-693-F 38/200 Steel 38BL-9HR TFB-7000(2) T-693 200B-8/8B FRP TRB-1100(2) T-
ملخص المحتوى في الصفحة رقم 11
1. MOUNTING Output Frequency Thru-hull Ship type Transducer Tank (W) (kHz) pipe 2k/3k 28/150 Steel 28F-18 TFB-7000(2) T-637 150B-12H FRP TRB-1100(2) T-637-F 50/107 Steel 50B-12 TFB-7000(2) T-643 100B-10R FRP TRB-1100(2) T-643-F 50/150 Steel 50B-12 TFB-7000(2) T-644 150B-12H FRP TRB-1100(2) T-644-F 3k/2k 68/200 Steel 68F-30H TFB-7000(2) T-647 200B-8/8B FRP TRB-1100(2) T-647-F 107/200 Steel 100B-10R TFB-7000(2) T-649 200B-8/8B FRP TRB-1100(2) T-649-F 3k/3k 28/38 Steel 28BL-12HR TFB-7000(2) T-681
ملخص المحتوى في الصفحة رقم 12
1. MOUNTING Output Frequency Thru-hull Ship type Transducer Tank (W) (kHz) pipe 3k/3k 28/88 Steel 28BL-12HR TFB-7000(2) T-682 (con’t) 88F-126H FRP TRB-1100(2) T-682-F Steel 28F-24H TFB-7000(2) T-682 88F-126H FRP TRB-1100(2) T-682-F 28/150 Steel 28BL-12HR TFB-7000(2) T-683 150B-12H FRP TRB-1100(2) T-683-F Steel 28F-24H TFB-7000(2) T-683 150B-12H FRP TRB-1100(2) T-683-F 28/200 Steel 28BL-12HR TFB-7000(2) T-683 200B-12H FRP TRB-1100(2) T-683-F Steel 28F-24H TFB-7000(2) T-683 200B-12H FRP TRB-1100
ملخص المحتوى في الصفحة رقم 13
1. MOUNTING Output Frequency Thru-hull Ship type Transducer Tank (W) (kHz) pipe 3k/3k 50/200 Steel 50BL-24H TFB-7000(2) T-695 (con’t) 200B-12H FRP TRB-1100(2) T-695-F Steel 50BL-24HR TFB-7000(2) T-683 200B-12H FRP TRB-1100(2) T-683-F Steel 50F-24H TFB-7000(2) T-683 200B-12H FRP TRB-1100(2) T-683-F 68/150 Steel 68F-30H TFB-7000(2) T-646 150B-12H FRP TRB-1100(2) T-646-F 68/200 Steel 68F-30H TFB-7000(2) T-646 200B-12H FRP TRB-1100(2) T-646-F 88/150 Steel 88F-126H TFB-7000(2) T-685 150B-12H FRP TR
ملخص المحتوى في الصفحة رقم 14
1. MOUNTING Output Frequency Thru-hull Ship type Transducer Tank (W) (kHz) pipe 2k (con’t) 50 Steel 50B-12 TFB-5000(1) T-611 FRP TRB-1000(1) T-611-F Steel 50BL-12 TFB-5000(1) T-702 FRP TRB-1000(1) T-702-F Steel 50BL-12HR TFB-5000(1) T-702 FRP TRB-1000(1) T-702-F 82 Steel 82B-35R TFB-5000(1) T-609 FRP TRB-1000(1) T-609-F 88 Steel 88B-10 TFB-5000(1) T-609 FRP TRB-1000(1) T-609-F 200 Steel 200B-8/8B TFB-5000(1) T-608 FRP TRB-1000(1) T-608-F 7
ملخص المحتوى في الصفحة رقم 15
1. MOUNTING Output Frequency Thru-hull Ship type Transducer Tank (W) (kHz) pipe 3k 28 Steel 28F-24H TFB-4000(1) T-616 FRP TRB-1000(1) T-616-F Steel 28BL-12HR TFB-4000(1) T-616 FRP TRB-1000(1) T-616-F 38 Steel 38BL-15HR TRB-4000(1) T-616- FRP TRB-1000(1) T-616-F 50 Steel 50F-24H TFB-4000(1) T-616 FRP TRB-1000(1) T-616-F Steel 50BL-24HR TFB-4000(1) T-616 FRP TRB-1000(1) T-616-F Steel 50BL-24H TFB-4000(1) T-694 FRP TRB-1000(1) T-694-F 68 Steel 68F-30H TFB-5000(1) T-614 FRP TRB-1000(1) T-614-F 88
ملخص المحتوى في الصفحة رقم 16
1. MOUNTING • A magnetic compass will be affected if the network sounder is placed too close to it. Observe the compass safe distances noted in the safety instructions to prevent disturbance to the mag- netic compass. Fasten the network sounder to the mounting location with four self-tapping screws (5×20), refer- ring to the outline drawing at the back of this manual for mounting dimensions. 1.3 Transducer The performance of the echo sounder largely depends upon the transducer position. Select
ملخص المحتوى في الصفحة رقم 17
1. MOUNTING 1.5 Optional Temperature Sensors 1.5.1 Transom mount temperature sensor T-02MTB • Fix the cable at a convenient location with cable clamp. • When the cable is led in through the transom board, make a hole of approx. 17 mm in diameter to pass the connector. After passing the cable, fill the hole with a sealing compound. D>50cm D 5x20 Mount sensor flush with hull bottom. 10
ملخص المحتوى في الصفحة رقم 18
1. MOUNTING 1.5.2 Thru-hull temperature sensor T-02MSB, T-03MSB Select a suitable mounting location considering the following points: • Select a mid-boat flat position. The sensor does not have to be installed perfectly perpendicular. However, the location should not be such that the transducer may be damaged when the boat is dry-docked. • Locate away from equipment which gives off heat. • Locate away from drain pipes. • Select a location where vibration is minimal. T-02MSB T-03MSB Sensor Hol
ملخص المحتوى في الصفحة رقم 19
2. WIRING 2.1 Wiring Outline Connect the power cable, transducer cables, sensor cable, network cable and ground wire to their respective locations on the network sounder. See the next page for how to connect the transducer cables. NavNet MJ-A6SPF0017 cable or HUB-100 (1/5/10/20/30 m) NavNet 3D or HUB-101 MOD-Z072 Cable - Standard: 5 m - Option: 2 m, 10 m DFF3 H TRANSDUCER L NETWORK 12-24VDC TEMP 2.8-1.4A Temperature or Ground wire Speed/Temperature (IV-2 sq) Sensor White Black GROUND Hi
ملخص المحتوى في الصفحة رقم 20
2. WIRING 2.2 Transducer Cable TD-ID transducer (Airmar make transducer) The TD-ID type transducer can be connected to this equipment. However, note the following lim- itations: • TD-ID transducer cannot be used with NavNet, NavNet vx2. • TD-ID transducer cannot be used with non-TD-ID transducer. • Connect single TD-ID transducer to low frequency WAGO connector, regardless of actual fre- quency. Cable fabrication Fabricate the transducer cable as shown below. Separate the transducer cable well
