ملخص المحتوى في الصفحة رقم 1
®
Product features may vary from the picture above.
Owner’s Manual with Assembly Instructions
Please read this manual and save it with your original sales receipt.
For Model 75547
Tools needed for assembly: Phillips Screwdriver, Slotted Screwdriver, Hammer, and Safety Scissors.
®
Use only with a Power Wheels 6 Volt Battery with A-style Connector and Built-in Thermal Fuse
® ™
and a Power Wheels Super 6 Volt Charger (both included).
ملخص المحتوى في الصفحة رقم 2
Table of Contents A Important Information . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .2 B Warnings and Cautions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .3 C Parts . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
ملخص المحتوى في الصفحة رقم 3
Warnings and Cautions B WARNING • Children can be harmed by small parts, sharp edges and sharp points in the vehicle’s unassembled state, or by electrical items. Care should be taken in unpacking and assembly of the vehicle. Children should not handle parts, including the battery, or help in assembly of the vehicle. • Keep small parts and plastic bags out of children’s reach. Dispose of plastic bags properly. • Adult supervision is required. Children do not have the judgement necessary to avoid
ملخص المحتوى في الصفحة رقم 4
Parts C • If you experience a problem with this product or are missing a part, please call us at 1-800-348-0751 rather than return this product to the store. • Please identify all parts before assembly and save all packaging material until assembly is complete to ensure that no parts are discarded. • Metal parts have been coated with a lubricant to protect them during shipment. Wipe all metal parts with a paper towel to remove any excess lubricant. Grille Steering Wheel Cap 6 Volt Battery Dash C
ملخص المحتوى في الصفحة رقم 5
T M Parts Hood Vehicle Body Tailgate Seat Key Knob Steering Wheel .354 Cap Nut – 3* Steering Column *For your convenience, an extra .354 cap nut has been included. 1 #8 x 1" Screw – 12 3 #6 x /2" Screw – 2 #6 x /8" Screw – 2 All Shown Actual Size Not Shown: Label Sheet 5
ملخص المحتوى في الصفحة رقم 6
Parts Diagram D 18 5 4 1 6 10 2 8 9 17 7 11 13 16 12 15 14 3 6 19 Parts 1 Hood 9 Knob 17 Battery Retainer 2 Microphone 10 Seat 18 Seat Belt Straps - 2 ™ 3 Steering Column 11 Tailgate 19 Super 6 Volt Charger 4 Steering Wheel 12 Left Taillight 5 Steering Wheel Cap 13 Right Taillight Not Shown: Label Sheet 6 Cap Nut – 2 14 Vehicle Body 7 Dash Cover 15 Grille 8Key 16 6 Volt Battery 6 ® TM
ملخص المحتوى في الصفحة رقم 7
Battery Charging E Important Notes WARNING • Your new battery must be charged for at least 18 hours before you use it in your vehicle for the • The battery must be handled by adults first time. only. The battery is heavy and contains • We recommend that you start charging your battery before beginning assembly of your vehicle. sulfuric acid (electrolyte). Dropping the • The battery must be upright while charging. battery could result in serious injury. • The charger is not a toy. • Never allow
ملخص المحتوى في الصفحة رقم 8
WARNING Avertissement WARNING Avertissement Battery Charging A-Style Charger Connector 1 2 A-Style Battery Connector GAP NO GAP Incorrect Correct • Plug the charger into a standard 120 volt wall outlet. • Plug the charger and battery connectors together. Note: If power flow to the wall outlet is controlled by a Push firmly to make sure the two connectors are com- switch, make sure the switch is “ON”. pletely joined. • Before first time use, charge the battery for at least 18 hours. Never charge
ملخص المحتوى في الصفحة رقم 9
Assembly F Do Not Omit Any Steps Tabs 1 3 Key “T” End Tab Slot Knob Microphone Dash Cover Hole “T” End • Position the dash cover as shown. Make sure the three tabs are at the top. • Insert the end of the microphone cord through the hole • Fit the knob into the hole in the right side of the in the right side of the dash. dash cover. • From the underside of the vehicle, bend the end of the • Fit the key into the hole to the left of the knob. microphone cord so that it forms a “T” under the dash.
ملخص المحتوى في الصفحة رقم 10
Assembly Hole Steering Wheel Steering Column Cap Nut 5 Front Axle 7 “UP” Bottom View • Fit the curved end of the steering column into the hole in • Hold the steering column in place and gently lower the the front axle. vehicle body. Please Note: You may need to straighten the vehicle • Position the steering wheel so that the spokes form a “Y” tires and rotate the steering column to fit it into the hole in as shown. the front axle. • While supporting the steering column, fit the steering wheel o
ملخص المحتوى في الصفحة رقم 11
Assembly 9 11 Seat Belt Straps Second T-tab Bottom T-tab Second Push T-tab Here First Slot Position Second Position Seat • Make sure the two seat belt straps are fastened together. If they are not fastened together, connect the fasteners to form one seat belt. • Insert the T-tab at one end of the seat belt through the slot in one arm of the seat. Do not pull the second T-tab through the slot. Please Note: The seat can be assembled in either of two positions for your child’s comfort. • Repeat t
ملخص المحتوى في الصفحة رقم 12
Assembly Right Taillight Outer 12 13 Lens Holes Left Taillight Lens Slots Tab Left Right Rear Bumper • Using safety scissors, remove the taillight lenses from Inner the plastic connector. Dispose of the plastic connector. Holes • Face the rear of the vehicle. Front Bumper • Insert the tabs on the back of the right and left taillight lenses into the taillight slots in the vehicle body. • Insert a #8 x 1" screw into each of the two inner screw Please Note: The left and right taillight lenses are N
ملخص المحتوى في الصفحة رقم 13
Assembly Slots 15 16 Grille Opening Pegs Hood Grille Opening Side Tab Tabs Grille Openings • Face the front of the vehicle. • Insert the two tabs at the top of the grille into the slots in Please Note: If you have already charged your the front of the vehicle body. ® Power Wheels battery for at least 18 hours, you may want • Press firmly to snap the tabs into the slots. to install it in the battery compartment before assembling the hood. Please refer to the Battery Installation section on • Fit
ملخص المحتوى في الصفحة رقم 14
Label Decoration G 2 11 3 Proper label application will help to keep the labels look- ing their best! When applying labels, keep the following 23 guidelines in mind: • Wash your hands before applying the labels. 28 • Before applying the labels, wipe the surface of the vehicle with a clean, dry cloth to remove any dust or oils. • Place the labels exactly as shown in the illustrations. • For best results, avoid repositioning a label once it has been applied to the vehicle. • After applying a labe
ملخص المحتوى في الصفحة رقم 15
WARNING Avertissement Avertissement WARNING WARNING Avertissement Battery Installation H ® Important Note: Use only a Power Wheels 6 volt battery with A-style connector and built-in thermal fuse. Use of any other battery can damage your vehicle. Make sure that 3 you charge the battery for at least 18 hours using the ® ™ enclosed Power Wheels Super 6 volt charger before operating your vehicle for the first time. Charge the battery for at least 14 hours after each use of the vehicle. Never Battery
ملخص المحتوى في الصفحة رقم 16
Battery Care and Disposal I Care Disposal ® If a battery leak develops, avoid contact with the leaking • Your Power Wheels battery is a sealed lead-acid acid and place the damaged battery in a plastic bag. See battery. It must be recycled or disposed of in an environ- information below for proper disposal. mentally sound manner. If acid comes in contact with skin or eyes, flush with • Do not dispose of a lead-acid battery in your regular, cool water for at least 15 minutes and call a physician
ملخص المحتوى في الصفحة رقم 17
Rules for Safe Driving J • While driving across a steep slope, the vehicle may tilt and tip over. The wheels could lose traction, WARNING causing the vehicle to slip. • While driving up a steep incline, the motor may • Adult supervision is required. Children do stop and the vehicle could roll backwards at an not have the judgement necessary to avoid unsafe speed. many accidents. Be sure that children oper- ating this vehicle can do so safely and that they are supervised at all times. • Never
ملخص المحتوى في الصفحة رقم 18
How to Operate Your Vehicle K To Drive To Back Up 3 1 1 2 3 2 Please Note: To avoid damaging the motors and gears, • Make sure the Power Stick™ shifter is in the forward ( ) 1 stop the vehicle before shifting from forward to position . reverse ( ). 2 • Press down on the foot pedal . The vehicle goes 1 • Once your child is completely comfortable with operating forward at a maximum of 3 /2mph . 3 the vehicle in the forward mode, introduce reverse ( ). • Help your child practice steering to
ملخص المحتوى في الصفحة رقم 19
Bumper- to - Bumper* Caring Limited Warranty For Your Vehicle M L • Check all screws, retainers and their protective coverings *One year limited warranty from date ® regularly and tighten as required. Check plastic parts on of purchase on Power Wheels vehicle. a regular basis for cracks or broken pieces. Six month limited warranty on 6 volt battery. • During snowy or rainy weather, the vehicle should be stored inside or under a protective cover. Remember to For the original purchaser, this on
ملخص المحتوى في الصفحة رقم 20
Problems and Solutions Guide N IMPORTANT! If you experience a problem with your vehicle, first check the Problems and Solutions ® Guide below. If you still experience a problem, please contact Power Wheels Consumer Affairs, toll-free at 1-800-348-0751 between 8 AM and 5 PM (EST) Monday through Friday. Or, contact ® your local Power Wheels authorized service center. For the location nearest you, please refer to the Authorized Service Center list beginning on page 23. Problem Possible Cause Soluti
