ملخص المحتوى في الصفحة رقم 1
B8776
Instructions
Please keep this instruction sheet for future reference, as it contains important information.
Adult assembly is required.
Tools required for assembly: Phillips Screwdriver, Hammer and Scrap Block of Wood (not included).
If you have any questions about this product, or are missing a part, please call us toll-free
at 1-800-432-5437, rather than return this product to the store.
We are available between 8 AM - 6 PM EST Monday through Friday.
Hearing-impaired consumers using TTY/
ملخص المحتوى في الصفحة رقم 2
Parts WARNING CAUTION To avoid serious injury: This product contains small parts • Adult supervision is required. in its unassembled state. Adult assembly is required. •Never use near cars and other motor vehicles, near streets, steps, sloped drive- IMPORTANT! ways, hills, roadways, alleys, swimming • Please save all packaging material until assembly is pool areas or other bodies of water. complete to ensure that no parts are discarded. • Always wear shoes or sneakers. • Please wipe each part w
ملخص المحتوى في الصفحة رقم 3
Assembly PUSH Key Seat Straight Axle Assembly Frame 3 Bottom View 1 •Turn the frame upside down. • Fit the seat onto the frame. •Insert the straight axle assembly through the holes in • Push firmly near the back end of the seat to "snap" it the rear of the frame. into place. •Insert and "snap" the key into the frame. Hint: You may need to tap the key with a hammer to secure it in place. Bushing Wheel (Grooved Side Down) (Flat Side First) Rear Wheel Straight Axle (Indented Side Down) Bushing Whee
ملخص المحتوى في الصفحة رقم 4
Assembly Pedal Hub Pedal Axle Tab Pedal Axle Tab Pedal Hub 7 • Fit two pedal hubs onto the pedal axle tabs. Make sure the tabs fit into the slot in each pedal hub. Front Wheel Hole 5 • Fit the cap nut on the end of the straight axle. •Tap the cap nut with a hammer. Gently pull the rear wheel to be sure the cap nut is securely attached to the straight axle. Hint: You may need the help of another adult to hold the other end of the straight axle in place. 8 • While holding the pedal hubs on the ped
ملخص المحتوى في الصفحة رقم 5
Assembly Fork Post Pedal Pedal Axle Front Wheel Assembly Scrap Block of Wood 10 Fork Cover 12 • Place a scrap block of wood under the front • Insert the fork post up through the hole in the neck of wheel assembly. the frame. Make sure the fork is positioned so that the • Fit a pedal on the pedal axle. Tap the pedal with a fork covers face the rear wheels. hammer until it is secure. • Pull the pedal up to be sure it is secure. If you can remove it, you have not secured it properly. Tap it with t
ملخص المحتوى في الصفحة رقم 6
Care Label Decoration •Periodically, check the plastic parts and if broken or cracked, dispose of them properly. •Periodically, check all fasteners regularly to be sure they are tight. If the fasteners are not tight, tighten them as necessary. •To clean, use a mild soap and water solution and a clean cloth. Rinse clean with water to remove soap residue. IMPORTANT! It is a good practice to start training children very young regarding the importance of helmet 1 use. When children are older and r
