Ei Electronics Ei186 دليل المستخدم

ملخص المحتوى في الصفحة رقم 1

RECOMMENDED LOCATIONS overheated PVC wiring etc). An Ionisation Alarm should be Installation
READ THIS FIRST INTERCONNECTING SMOKE/HEAT
located upstairs to detect fast flaming fires (e.g. paper burning
Figure 2 illustrates where Smoke Alarms and Heat Alarms ALARMS Select a location complying with the above advice.
CHECK OPERATION OF SYSTEM
in a container or a grease fire in the kitchen) which could rapidly
should be located in a typical two storey house. Note the
block the main escape route.
1.

ملخص المحتوى في الصفحة رقم 2

Checking Battery Back-up If there are frequent nuisance/false alarms it may be necessary SPECIFICATIONS TROUBLESHOOTING to re-locate the device away from the source of the fumes. If for The Alarm automatically monitors the battery every 40 seconds 4. Call the Fire Brigade from a neighb Supply Voltage: 10.5 to 30.0 Volts (DC Only) 1. FREQUENT NUISANCE ALARMS OCCUR: some reason the alarm continues to sound without smoke or to ensure that it is satisfactory. If it is depleted it will give a short o