Dell NT دليل المستخدم

ملخص المحتوى في الصفحة رقم 1

CHAPTER 3
Windows NT and Windows 2000
SAN Configurations
This chapter provides an example of a Windows NT and Windows 2000 SAN configu-
ration and provides high-level installation instructions for installing the Windows SAN
with either PowerVault 650F and 651F storage systems or the 660F storage system.
NOTE: For information about the PowerVault 530F SAN appliance, see Chapter 5,
“Dell PowerVault 530F SAN Appliance Configurations.”
Windows NT or Windows 2000 SAN
Figure 3-1 shows an example of a

ملخص المحتوى في الصفحة رقم 2

Figure 3-1. Windows NT and Windows 2000 20-Server SAN Sample Configuration 3-2 Dell PowerVault SAN Administrator’sGuide

ملخص المحتوى في الصفحة رقم 3

High-Level Installation Instructions for a Windows NT or Windows 2000 SAN When installing a SAN, you must perform some procedures that are common to all devices and some that vary depending on your SAN configuration. NOTE: Ensure that all of your SAN components have the latest firmware and software installed on them. For information about updating your software and firmware, see Chapter 9, “Upgrading Your Dell PowerVault Fibre Channel Software and Firmware.” 1. For all of the following devices

ملخص المحتوى في الصفحة رقم 4

f. Install Dell OpenManage Storage Consolidation. For instructions, see Chap- ter 11, “Installing, Configuring, and Removing Microsoft Windows SAN Software Components.“ g. Install failover software on all servers. The software must be installed in the following order if the server uses both types of storage systems. 1. Install Dell OpenManage ATF on all servers to which 650F or 651F LUNs will be assigned. For instructions, see Chapter 11, “Installing, Configur- ing, and Removing Microsoft Window

ملخص المحتوى في الصفحة رقم 5

• Create virtual disks in the 660Fs. For instructions, see “Managing LUNs” in Chapter14orseethe Dell OpenManage Array Manager User’sGuide. 8. Reboot all servers after all LUNs have transitioned to owner status and you have verified their status by using Dell OpenManage Data Supervisor or Dell Open- Manage Data Administrator for 650Fs and 651Fs or Dell OpenManage Array Manager for 660Fs. 9. Assign LUNs and virtual disks to servers by using Dell OpenManage Storage Consolidation. For instructions,

ملخص المحتوى في الصفحة رقم 6

3-6 Dell PowerVault SAN Administrator’sGuide