ملخص المحتوى في الصفحة رقم 1
ملخص المحتوى في الصفحة رقم 2
ملخص المحتوى في الصفحة رقم 3
Series 1 Rotary Cutter TABLE OF CONTENTS DESCRIPTION PAGE Warranty ..................................................................... 1 Introduction................................................................ 2 SAFETY....................................................................... 3 Safety................................................................ 3 General Safety ..............
ملخص المحتوى في الصفحة رقم 4
Series 1 Rotary Cutter WARRANTY POLICY Buhler Manufacturing products are warranted for a period of twelve (12) months (90 days for commercial application) from original date of purchase, by original purchaser, to be free from defects in material and workmanship under correct, normal agricultural use and proper applications. Buhler Manufacturing’s obligations under this warranty shall be limited to the repair or exchange
ملخص المحتوى في الصفحة رقم 5
Series 1 Rotary Cutter INTRODUCTION The Buhler Farm King Series 1 Rotary cutter available in 48” and 60” and is equipped with a 3-point hitch. The 3-point hitch is Buhler Quick Hitch compatible so it is easy to attach and unhook. 3-point hitch models include a single solid rubber training wheel. Buhler Farm King Rotary Cutters are built tough and made to last. The blades are heat- treated to enhance rigidity and the
ملخص المحتوى في الصفحة رقم 6
Series 1 Rotary Cutter SAFETY Remember, YOU are the key to safety. Good safety practices not only protect you, but also the people around you. Make these practices a working part of your safety program. Be certain that everyone operating this equipment is familiar with the recommended operating and maintenance procedures and follows all the safety precautions. Most accidents can be prevented. Do not risk injury or dea
ملخص المحتوى في الصفحة رقم 7
Series 1 Rotary Cutter GENERAL SAFETY INSTRUCTIONS Have a first-aid kit available for use and know how to use it. Have a fire extinguisher available, stored in a highly visible location, and know how to use it. Wear appropriate protective gear. This list may include but is not limited to: - hard hat - protective shoes with slip resistant soles - protective glasses or goggles - heavy gloves - wet weather gear - heari
ملخص المحتوى في الصفحة رقم 8
Series 1 Rotary Cutter SERVICE AND MAINTENANCE SAFETY Stop engine, set brake, remove ignition key, and wait for all moving parts to stop before servicing, adjusting, repairing, or unplugging. Support the equipment with blocks or safety stands before working beneath it. Follow good shop practices including: - keep service area clean and dry - be sure electrical outlets and tools are properly grounded - use adequate li
ملخص المحتوى في الصفحة رقم 9
Series 1 Rotary Cutter SERIES 1 ROTARY CUTTER SAFETY SIGNS Replace safety sign immediately should it become damaged, torn or illegible. Obtain replacements from your authorized dealer using the part numbers shown. #1 #4 #2 #3
ملخص المحتوى في الصفحة رقم 10
Series 1 Rotary Cutter ASSEMBLY INSTRUCTIONS 1. Raise the hitch arms (#4) and the hitch supports (#5) from the deck. Remove the bolt holding on the top link (#6). Line up the end holes on the hitch supports with the holes on the outside of the hitch arms where you just removed the bolt. Bolt the hitch arms, hitch supports and top link together with the bolt you just removed using two flat washers and a lock nut. 2. C
ملخص المحتوى في الصفحة رقم 11
Series 1 Rotary Cutter OPERATING INSTRUCTIONS 1. Connecting to tractor: All cutters are supplied with a standard 1 3/8" 6-spline yoke on the PTO shaft. Warning: This cutter is designed to operate only with a 540 rpm PTO. After connecting cutter to tractor and before doing any cutting, check to see that the PTO shaft is not touching anywhere on the cutter when raising and lowering or when cornering. 2. PTO Shaft
ملخص المحتوى في الصفحة رقم 12
Series 1 Rotary Cutter THEORY OF OPERATIONS 9
ملخص المحتوى في الصفحة رقم 13
Series 1 Rotary Cutter MAINTENANCE SERVICING INSTRUCTIONS LUBRICATION 1. Gearbox: The gearbox should be filled with SAE90 oil to the bottom edge of the lower oil plug when shipped. Check this before using the cutter and at regular intervals to see that this oil level is maintained. 2. Grease wheels, tail wheel spindle sleeve, universal joints and shield bushings on the PTO shaft after every eight hours of
ملخص المحتوى في الصفحة رقم 14
Series 1 Rotary Cutter 11
ملخص المحتوى في الصفحة رقم 15
Series 1 Rotary Cutter 4’ & 5’ SERIES 1 ROTARY CUTTER 12
ملخص المحتوى في الصفحة رقم 16
Series 1 Rotary Cutter WHEN ORDERING PARTS Always give your dealer the Model, Color and Serial Number of your machine to assist him in ordering and obtaining the correct parts. Use the exploded view and tabular listing of the area of interest to exactly identify the required part. 4' & 5' SER 1 ROTARY CUTTER ITEM PART # DESCRIPTION 1 25312 Deck Weldment - 4' 25311 Deck Weldment - 5' 25315 Tail Wheel Bracke
ملخص المحتوى في الصفحة رقم 17
Series 1 Rotary Cutter 36 909773 M12 X 1.75 X 25 Hex Bolt 37 909774 Lug Bolt Flat Washer 38 116786 Spacer 1 1/4"ID x 1 3/4"OD x 1/2" 39 84583 1/8" Drive in Grease Fitting 40 81210 1/4" x 2" Cotter Pin 41 967110 1 1/4"ID x 14 Ga Narrow Rim Washer 42 814511 Blade (18") - 4' (standard) 966519 Blade (24") - 5' (standard) 43 116901 Blade Bar Weldment - 4' & 5' 44 81249 3/16" x 2 1/2" Cotter Pin 45 814526 1" Slotted Hex Nu
ملخص المحتوى في الصفحة رقم 18
Series 1 Rotary Cutter SER 1 ROTARY CUTTER CHAIN KIT SER 1 ROTARY CUTTER - CHAIN KIT ITEM PART # DESCRIPTION 1 25331 Front Chain Holder, 4' (48'' Long) 25313 Front Chain Holder, 5' (60'' Long) 2 116888 Front Chain Rod, 4' (3/8'' x 48'') 116795 Front Chain Rod, 5' (3/8'' x 60'') 3 117021 Rear Center Chain Holder, 4' (24.23'' Long) 117024 Rear Center Chain Holder, 5' (29.86'' Long) 4 117023 R.H. Rear Side
ملخص المحتوى في الصفحة رقم 19
Series 1 Rotary Cutter MODEL #410 & #510 SERIES 1 ROTARY CUTTER PTO SHAFT MODEL #410 & #510 (SHEAR PIN) - SERIES 1 ITEM # PART # DESCRIPTION F0879 Shaft Complete 1 907186 Quick Disconnect Yoke (6 Spline) 540rpm 2 966211 Repair Kit 3 936344 Outer Tube W/ Yoke 4 936345 Inner Tube W/ Yoke 5 966216 Shear Yoke 6 909766 Shield Kit 7 9812034 Shear Bolt 1/2" x 3 1/2" Gr 2 8 812364 Nutlk (Steel) 1/2" Grb (pl)
ملخص المحتوى في الصفحة رقم 20
Series 1 Rotary Cutter MODEL #410 SERIES 1 ROTARY CUTTER GEARBOX 17
