ملخص المحتوى في الصفحة رقم 1
™
Pet Hair Eraser
B A G L E S S V A C U U M
U S E R ’ S G U I D E
3 9 2 0 , 6 7 5 0 S E R I E S
3
Safety Instructions
4
Product View
5-6
Assembly
6-10
Operations
10-16
Maintenance and Care
17-18
Troubleshooting
18
Consumer Services
19
Replacement Parts
20
Warranty
ملخص المحتوى في الصفحة رقم 2
Thanks for buying a BISSELL Vacuum We’re glad you purchased a BISSELL vacuum. Everything we know about floor care went into the design and construction of this complete, high-tech home cleaning system. Your BISSELL vacuum is well made, and we back it with a limited three year warranty. We also stand behind it with a knowledgeable, dedicated Consumer Services department, so, should you ever have a problem, you’ll receive fast, considerate assistance. My great-grandfather invented the floor
ملخص المحتوى في الصفحة رقم 3
IMPORTANT SAFETY INSTRUCTIONS When using an electrical appliance, basic ■ Turn off all controls before plugging or unplugging precautions should be observed, including vacuum cleaner. the following: ■ Use extra care when cleaning stairs. ■ Do not pick up flammable materials (lighter fluid, READ ALL INSTRUCTIONS gasoline, kerosene, etc.) or use in the presence of explosive liquids or vapors. BEFORE USING YOUR ■ Do not pick up toxic material (chlorine bleach, UPRIGhT VACUUM. ammonia
ملخص المحتوى في الصفحة رقم 4
Product view Handle ™ Quick Release Cord Wraps Hose and Cord Clip Dusting Brush/ Upholstery Tool Pet Power Cord ® Carry Handle TurboBrush Stretch Hose Crevice Tool Pet Contour ™ Tool Extension Wand Power Switch Clean Filter Indicator Curved Hose Wand Twist ‘n Snap™ Hose Upper Tank Lower HEPA Media Hose Clip ™ Easy Empty Post Motor Filter Dirt Container ® Washable Hose Lock ‘n Seal Lever Pre-Motor Filter Wand Base Headlight Handle Release Pedal Foot Height Adjustment Windo
ملخص المحتوى في الصفحة رقم 5
CAUTION: Assembly Do not plug in your vacuum cleaner until The only tool you’ll need to assemble your you are familiar with vacuum cleaner is a Phillips screwdriver. all instructions and Attach handle to vacuum operating procedures. 1. Locate the handle and cord wrap. Remove the screw packet taped to the handle. 2. 2. Stand the vacuum upright and from the rear of the unit, slide the base of the handle firmly into the grooves at the top of the vacuum body. 3. IMPORTANT – before
ملخص المحتوى في الصفحة رقم 6
1. Assembly Twist 'n Snap Hose Attach vacuum hose and tools 1. Line up the tabs on the base of the Twist ‘n Snap hose with the corresponding notches 6. on the hose collar as shown. 2. Turn the Twist ‘n Snap hose to the left to lock the hose into place. 3. Connect the curved hose wand to the hose. Grasping the curved hose wand, slide the end of the curved hose wand onto the hose 8. wand base. Snap the hose into the hose clip. 7. NOTE: The vacuum will not operate effectively unless th
ملخص المحتوى في الصفحة رقم 7
Operations 1. 2. handle positions 3. Press the handle release pedal, located on the lower left side of the vacuum, with your foot to place your vacuum into one of three cleaning positions. 1. Upright – For storage and above floor cleaning with tools. 2. Normal Cleaning – Press handle release pedal once. Position used for most household floor cleaning tasks. Tip: 3. Low Cleaning – With the vacuum in normal cleaning position, press handle release pedal Before cleaning under low furniture
ملخص المحتوى في الصفحة رقم 8
Operations 1. Transporting cleaner 1. To move your cleaner from room to room, put the handle in the upright position, tilt the cleaner back on its rear wheels and push forward. 2. The cleaner can also be moved by using the carry handle. Clean filter indicator 2a. 2b. The clean filter Indicator tells you when the air flow right way to carry wrong way to carry in your vacuum is reduced due to dirty filters or a clog in the hose. The clean filter indicator will remain green while the unit
ملخص المحتوى في الصفحة رقم 9
Dusting Brush/ Upholstery Tool Operations Crevice Tool Special on-board tools Your vacuum is not only a powerful carpet and rug cleaner, it’s also a versatile above floor vacuum cleaner when you select one of the special tools. Extension Wand 1. Raise the handle to the upright position. Curved Hose 2. Grasp the curved hose wand handle to sepa- Wand rate from hose wand base. 3. Attach tools by firmly pushing onto vacuum hose, curved hose wand or extension wand. They are a friction fi
ملخص المحتوى في الصفحة رقم 10
Operations Quick Release Cord Wraps Power cord usage 1. To use your vacuum, remove the cord and plug it into an electrical outlet. For your convenience, there are two quick release cord wraps for easy cord removal. There is also a cord clip that is part of the upper cord wrap where you can attach the cord when vacuuming. 2. When you are finished cleaning, turn vacuum cleaner off. 3. Unplug power cord by grasping the polarized plug (NOT the cord) and disconnect from outlet. 4. Loop
ملخص المحتوى في الصفحة رقم 11
Maintenance and care 2. Empty dirt container The dirt container needs to be emptied when the dirt reaches the “Full” line on the container. 1. Unplug the vacuum from electrical outlet 2. Slide the Lock ‘n Seal Lever to the “Unlock” Unlock position. 4. 3. Grasp handle and pull the dirt container straight out to remove from the vacuum. 4. Empty dirt into garbage container. NOTE: Emptying the dirt container after every use will help prevent over filling and ensure that the vacuum is ready
ملخص المحتوى في الصفحة رقم 12
Maintenance and care Check rotating floor brush and drive belt You should check your vacuum cleaner’s rotating floor brush and drive belt regularly W ARNING: for wear or damage. You should also clean To reduce the risk of injury the brush and brush ends of strings, hair from moving parts, turn and carpet fibers. This type of debris can vacuum cleaner off and wrap around the brush and hamper its disconnect power plug ability to effectively clean your carpet. Also from electrical outle
ملخص المحتوى في الصفحة رقم 13
Maintenance and care Replace drive belt 1. Unplug the vacuum from electrical outlet. 2. With rotating floor brush removed from vacuum cleaner (Steps 1-4 of check rotating floor brush and drive belt), grasp old drive belt and remove from motor pulley. Discard the old drive belt. 3. Place new drive belt over motor pulley 3. and loop other end over rotating floor brush in the space between the bristles. Motor Pulley NOTE: It is important that you use only genuine BISSELL replacement bel
ملخص المحتوى في الصفحة رقم 14
Maintenance and care Replace lightbulb 2. 1. Unplug the vacuum from electrical outlet. 2. Using a flat bladed screwdriver, pry the tab on the left and right side out and pull out to remove the lens. 3. Remove the bulb from the socket by 3. grasping the bulb and pulling gently. Install the new bulb by pushing it gently into the socket until the bulb snaps into place. 4. Reposition the lens and snap it back 4. into place. ® Maintaining Pet TurboBrush The Pet TurboBrush should be checke
ملخص المحتوى في الصفحة رقم 15
Maintenance and care Clearing clogs 2. Low suction or poor pickup may be due to a clog in the vacuum cleaner. If you notice a change in the sound of the motor, check for clogs. 1. Unplug the vacuum from electrical outlet. 4. 2. Empty dirt container. 5. 3. Check upper tank for build up or clogs. 4. If you notice a clog in the upper tank, remove the separator plate (see section "Cleaning the Upper Tank" on page 16). 5. Grasp the curved wand and separate it from the hose wand base. Che
ملخص المحتوى في الصفحة رقم 16
Maintenance and care Cleaning the upper tank 1. 1. Grasp the inner cyclone and twist to the left or to the unlocked marking, until the locking tabs stop the rotation. Pull down from the upper tank to remove it. 2. Wipe out the inside of the upper tank and the inner cyclone with a damp cloth moistened with water or a mild cleaning solution. 3. If you desire to thoroughly clean the louvers 3. located in the upper portion of the inner cyclone, hold the bottom of the cyclone and gently pull
ملخص المحتوى في الصفحة رقم 17
Troubleshooting W ARNING: To reduce the risk of electric shock, turn power OFF and disconnect polarized plug from electrical outlet before performing maintenance or troubleshooting. Vacuum cleaner won’t run Possible causes Remedies 1. Power cord not plugged in 1. Check electrical plug 2. Blown fuse/tripped breaker in home 2. Check/replace fuse or reset breaker 3. Damaged power cord 3. Unplug, check for damage, replace as necessary Vacuum cleaner and tools won’t pick up dirt P
ملخص المحتوى في الصفحة رقم 18
Troubleshooting Other maintenance or service not included in the manual should be performed by an authorized service representative. Thank you for selecting a BISSELL product. Please do not return this product to the store. For any questions or concerns, BISSELL is happy to be of service. Contact us directly at 1-800-237-7691. BISSELL Consumer Services For information about repairs or replacement parts, or questions about your warranty, call: BISSELL Consumer Services 1-800-237-
ملخص المحتوى في الصفحة رقم 19
Replacement parts - BISSELL vacuum You may purchase parts from your retailer, by calling BISSELL Consumer Services or by visiting our website. Below is a list of common replacement parts. While not all of these parts may have come with your specific model, they are available for purchase if desired. Please note, all attachments may not store on board your vacuum. Item Part No. Part Name 1 32074 Style 7/9/10/12/14 Drive Belt (2-Pack) 2 203-1297 Headlight Bulb 3 203-1063 Crevice Tool 4 203-12
ملخص المحتوى في الصفحة رقم 20
™ Warranty - BISSELL Pet hair Eraser Vacuum This warranty gives you specific legal rights, and you may also have other rights which may vary from state to state. If you need additional instruction regarding this warranty or have questions regarding what it may cover, please contact BISSELL Consumer Services by E-mail, telephone, or regular mail as described below. Limited Three Year Warranty Subject to the *EXCEPTIONS AND EXCLUSIONS identified below, upon receipt of the product BISSELL Home
