ملخص المحتوى في الصفحة رقم 1
®
Sno-Thro
Owner/Operator Manual
Models
921011 – Deluxe 24
921012 – Deluxe 27
921013 – Deluxe 30
921014 – Deluxe Track 24
921015 – Deluxe Track 27
921016 – Deluxe Track 30
921017 – Deluxe 24 Platinum
921018 – Deluxe 30 Platinum
921019 – Deluxe 24
921020 – Deluxe 30
ENGLISH
FRANÇAIS
03882700G 2/10
Printed in USA
ملخص المحتوى في الصفحة رقم 2
TABLE OF CONTENTS SAFETY. . . . . . . . . . . . . . . . . . . . . . . . . . 4 STORAGE . . . . . . . . . . . . . . . . . . . . . . . 36 ASSEMBLY . . . . . . . . . . . . . . . . . . . . . . . 8 SERVICE PARTS . . . . . . . . . . . . . . . . . 36 CONTROLS and FEATURES . . . . . . . . 13 ACCESSORIES. . . . . . . . . . . . . . . . . . . 36 OPERATION . . . . . . . . . . . . . . . . . . . . . 16 TROUBLESHOOTING . . . . . . . . . . . . . 37 MAINTENANCE . . . . . . . . . . . . . . . . . . 23 SPECIFICATION
ملخص المحتوى في الصفحة رقم 3
DISCLAIMER Ariens reserves the right to discontinue, make changes to, and add improvements upon its products at any time without public notice or obligation. The descriptions and specifications contained in this manual were in effect at printing. Equipment described within this manual may be optional. Some illustrations may not be applicable to your unit. DELIVERY Customer Note: If you have purchased this OS7006 product without complete assembly and instruction by your retailer, it is
ملخص المحتوى في الصفحة رقم 4
SAFETY PRACTICES AND LAWS WARNING: To avoid injury to Practice usual and customary safe working hands and feet, always disengage precautions, for the benefit of yourself and clutches, shut off engine, and wait others. Understand and follow all safety for all movement to stop before messages. Be alert to unsafe conditions and unclogging or working on snow the possibility of minor, moderate, or serious thrower. injury or death. Learn applicable rules and Hand contact with the rotating
ملخص المحتوى في الصفحة رقم 5
1. WARNING! 3. DANGER! ROTATING PARTS. Read Owner/Operator Manual. Keep clear of auger while engine is running. � Read Operator’s Manual. OL1801 � Allow operation only by OS2080 properly trained adult, never children. Keep people away from unit � Stop engine and remove while operating. Keep children ignition key prior to out of work area and under leaving the operator’s watchful care of a responsible position for any reason. OL4370 adult. � Keep all controls, guards and safety device
ملخص المحتوى في الصفحة رقم 6
DO NOT operate near drop-offs, ditches, or ALWAYS disengage attachment, stop unit embankments. Unit can suddenly turn over if and engine, remove key and allow moving a wheel is over the edge of a cliff or ditch, or if parts to stop before leaving operator’s an edge caves in. position. Falling snow, fog, etc. can reduce vision and ROTATING AUGER CAN CAUSE SERIOUS cause an accident. Operate unit only when INJURY. NEVER ATTEMPT TO UNCLOG there is good visibility and light. OR CLEAN UNIT WHILE
ملخص المحتوى في الصفحة رقم 7
Check clutch and brake operation frequently. Keep the nozzle in contact with the rim of the Adjust and service as required. All motion of fuel tank or container opening at all times until drive wheels and auger/impeller must stop fueling is complete. Do not use a nozzle lock- quickly when control levers are released. open device. DO NOT operate on steep slopes. DO NOT If fuel is spilled on clothing, change clothing clear snow across the face of slopes. Keep all immediately. movement on slopes
ملخص المحتوى في الصفحة رقم 8
ASSEMBLY 921017, 018 WARNING: AVOID INJURY. Read and understand the entire Safety 3 section before proceeding. 2 WARNING: Dropping or tipping over boxed unit could result in 1 personal injury or damage to unit. 4 PACKAGE CONTENTS 921011, 012, 013, 014, 015, 016, 019, 020 3 2 1 1. Sno-Thro 4. Literature Unit Pack with Extra Shear 2. Discharge Bolts Chute 3. Chute Rod Figure 4 OS7019 4, 5 ASSEMBLY Tools Required: OS7021 �Pliers 1. Sno-Thro 4. Literature � Open-End Wrenches: 3/8, 7/16, 1/
ملخص المحتوى في الصفحة رقم 9
Unfold Handlebar (Figure 5) 921012, 013, 015, 016, 020 1. Remove the lower and loosen the upper hardware on the handlebar assembly. 3 2. Loosen the hardware on the shift rod. 3. Put the speed selector lever in the 4 second reverse position. (Fastest 1 forward position for 921011, 014, 019). 2 4. Rotate the handlebars into operating position. IMPORTANT: Be careful not to damage cable spring hooks when rotating handlebars upward. 5. Install and tighten all hardware on the handlebar assembly
ملخص المحتوى في الصفحة رقم 10
NOTE: To ensure the discharge chute follows Install Discharge Chute and its full range of travel, make sure the control Discharge Chute Rod lever is pushed all the way to the left before (921017, 018) installing and pinning the chute rod. 7. Align the holes on the end of the chute (Figure 8, 9, 10 and 11) rod with the mark on the gear assembly 1. Grease underside of discharge chute and slide the end without a pin through ring (if not already greased). the gear assembly, through the hook
ملخص المحتوى في الصفحة رقم 11
Remote Deflector Control (921013, 016, 017, 018, 020) 1 (Figure 12) 2 Connect the cable end to the cable anchor on the discharge deflector before clipping the cable to the cable bracket on the discharge chute. 1. Route deflector remote cable along the left side of the chute pedestal. 2. Insert the barrel on the cable end into the bracket on left side of chute deflector (Figure 12). 3 OS7157 3. Hold seal out of the way while routing 1. Chute Control the cable through the bracket on the le
ملخص المحتوى في الصفحة رقم 12
Check Function of Dual Handle Check Track Tension Interlock (921011, 012, 013, 017, 018, 019, 020) Without the engine running, press down Check tracking of unit with the differential (engage) both clutch levers. Release locked,and tension of tracks (see Track attachment clutch lever. Attachment clutch Tension Adjustment on page 35). should remain engaged until traction clutch Check Auger Gearcase Oil lever is released, then both clutches must disengage. If they do not, contact your Deale
ملخص المحتوى في الصفحة رقم 13
CONTROLS AND FEATURES 1. Attachment Clutch Lever 2. Speed Selector 3. Traction Drive Clutch Lever 4. Remote Wheel Lock (012, 013, 020) SMALL DASH 5. Deflector Remote Control (013, 016, 017, 018, 020) 3 6. Height Adjuster Trigger (014, 015, 016) 1 2 7. Chute Rotation Control (017, 018) 4 6 LARGE DASH 7 3 3 5 5 2 2 1 1 6 6 4 OS7440 Figure 13 OS7093 GB - 13
ملخص المحتوى في الصفحة رقم 14
12 4 10 2 5 11 1 9 8 7 1. Skid Shoe 2. Clean-Out Tool 3. Remote Discharge Chute Deflector (013, 016, 017, 018, 020) 4. Manual Discharge Chute Deflector (011, 13 012, 014, 019) 3 5. Belt Cover 6. Headlight (012, 013, 015, 016, 017, 018, 020) 6 7. Auger 8. Auger Gearcase 9. Scraper Blade 10. Discharge Chute 11. Impeller 12. Chute Crank (011, 012, 013, 014, 015, 016, 019, 020) 13. Quick Stick Chute Rotation (017, 018) 13 3 6 OS7410 Figure 14 OS7415 OS7420 GB - 14
ملخص المحتوى في الصفحة رقم 15
1. Oil Drain 921011, 012, 013, 014, 2. Fuel Shut-Off Valve 015, 016, 017, 018 3. Primer Bulb 6 4. Recoil Starter Handle 7 2 3 5. Throttle (Engine Stop) 5 6. Choke Control Knob 7. Ignition Key (Push/Pull) 8. Fuel Tank and Cap 4 9. Oil Fill/Dipstick 1 8 4 9 921019, 020 5 7 6 4 3 2 1 8 4 9 9 OS7410 Figure 15 OS7415 OS7420 GB - 15
ملخص المحتوى في الصفحة رقم 16
OPERATION Attachment Clutch - Right Hand WARNING: AVOID INJURY. Read Lever and understand the entire Safety section before proceeding. Squeeze Attachment 2 Clutch Lever against handlebar (1) to WARNING: To avoid injury to hands engage attachment. and feet, always disengage Release both clutch clutches, shut off engine, and wait levers (2) to disengage for all movement to stop before power and apply brake unclogging or working on snow 1 to attachment. thrower. IMPORTANT: If the Ke
ملخص المحتوى في الصفحة رقم 17
Primer Bulb Choke Control Knob Pushing the primer bulb in adds 1.Choke Closed 2 1 position: chokes off air fuel for easier engine start. to engine for easier Refer to Starting and Shut Off start. on page 22. OS7320 2.Choke Open position: allows for normal operation. 921019, 020 CHOKE RUN IMPORTANT: OS7275 Gradually open choke after engine starts. 921019, 020 OS1321 1 2 Speed Selector (012, 013, 015, 016, 017, 018, 020) Throttle Position the Speed Selector in the 4 3 2 1 appropriate s
ملخص المحتوى في الصفحة رقم 18
Snow Clean-Out Tool Manual Discharge Deflector (921011, 012, 014, 015, 019) (Figure 16) ALWAYS position discharge chute deflector at a safe angle before starting engine. DO WARNING: Hand contact with the NOT throw snow any higher than necessary. rotating impeller is the most common cause of injury associated 1. Push deflector handle forward or down with snow throwers. Never use your to throw snow lower. hand to clean out the discharge 2. Pull deflector handle up or to the rear to chut
ملخص المحتوى في الصفحة رقم 19
Wheel Unlocked OS7105 Axle Lock Pin Figure 18 IMPORTANT: DO NOT force frozen chute controls. If frozen, take to warm place until controls are free. Discharge Chute Crank (921011, 012, 013, 014, 015, 016, 019, 020) IMPORTANT: If chute does not stay in set position, adjust as directed in SERVICE AND ADJUSTMENTS on page 26, or repair before operation. Rotate the Chute with Discharge Chute OS6000 Crank (Figure 19). Wheel Locked Figure 20 921011, 012, 013, 014, 015, 016, 019, 020 Remote Whee
ملخص المحتوى في الصفحة رقم 20
Skid Shoes FILLING FUEL TANK The skid shoes control the distance between the scraper blade and the ground. Adjust skid WARNING: AVOID INJURY. Read shoes equally to keep blade level with the and understand the entire Safety ground. Refer to Pre-Start on page 21 for section before proceeding. recommended settings. Fuel Shut-Off Valve Track Angle IMPORTANT: The fuel shut-off valve MUST (921014, 015, 016) be in the closed position prior to transporting the unit. (Figure 21) The fuel shut-of
