American Standard Tropic T038.50X دليل المستخدم

ملخص المحتوى في الصفحة رقم 1

Installation
Instructions
TROPIC
T038.50X
IN WALL PRESSURE BALANCING
BATH AND SHOWER TRIM KIT
with EverClean™ Finish

Congratulations on purchasing your American Standard faucet

with EverClean finish found only on American Standard faucets.
EverClean Finish
• One wipe effortlessly removes spots
• Eliminates the need for cleaners and scrubbing
• Permanent surface protectant remains beautiful for the life of the faucet
• EverClean™ available on: Polished Chrome, Satin Nickel,
Stainless

ملخص المحتوى في الصفحة رقم 2

7 5 3 1 1 1 5 5 0 1 1 3 3 1 1 1 1 9 9 7 7 5 5 3 3 1 1 5 INSTALL TRIM 8 CAUTION: Protect finish on SHOWER ARM, 6 SHOWER HEAD and TUB SPOUT when installing. 9 When finished tiling the wall, remove PLASTER GUARD (A) HEX and turn off water supply. WRENCH 7 Push CAP (1) over VALVE CARTRIDGE (2). A Mount ESCUTCHEON (3) and gasket to valve body with SCREWS (4). Remove PIPE CAP & PLUG (5) from shower pipe and tub filler pipe. Apply Teflon Tape to both ends of SHOWER ARM (6). Install SHOWER ARM (6) with FL

ملخص المحتوى في الصفحة رقم 3

SERVICE 4 7 If faucet drips, operate handle several times from "off" to "on". Do not apply excessive force. 1 Clogged CARTRIDGE (1) inlets may cause reduced flow in "full on" hot or cold. To clean 5 inlets, first turn off water supply, then: 3 Remove HANDLE (2). Remove two SCREWS (6) holding ESCUTCHEON (7) 6 and remvoe ESCUTCHEON (7). Remove CAP (3), SCREWS (5) and CARTRIDGE (1). Clean inlets and MANIFOLD (4). Reassemble CARTRIDGE (1), alternately tightening SCREWS (5). 2 Replace CAP (3) and H