Equator Non Vented Combination Washer MJ-9900 دليل المستخدم

ملخص المحتوى في الصفحة رقم 1

Model MJ-9900
Non-Vented Combination Washer/
Installation Manual
Website: http://www.MajesticAppliances.com
Check this website under Models for the most up-to-date manual. In all situations,
the most current manual goverens in questions of use and warranty

ملخص المحتوى في الصفحة رقم 2

Welcome... Congr atulations. W elcome to the gro wing family of Majestic™ Appliance o wners. By c hoosing a Majestic Appliances model as y our laundry appliance y ou not only found the best in reliable tec hnology , but abo v e all y ou ha v e found a faithful and untiring con v enience appliance. Y our mac hine is strong, reliable and long lasting. All those qualities w hic h ha v e made the Majestic™ tr ademark famous the w orld o v er . Abo v e all, Majestic products are easy to use.

ملخص المحتوى في الصفحة رقم 3

Installing/Removing Getting things ready to install your appliance Unpacking, Inspecting, Electricity, Closets/Alcoves, Plumbing, Venting Unpacking • Check the packing box for external damage. It is your responsibility to register any damage with the freight company delivering the product. • Remove the strapping, then slide the cardboard surround off the machine. Re≠move the foam protecting material and the plastic bag. OWNER RESPONSIBLE • Write down the serial number from the box or the

ملخص المحتوى في الصفحة رقم 4

REMOVING THE FOAM DRUM SUPPORT REPLACING THE METAL BOTTOM PAN. WARNING!!! IN ORDER TO REMOVE THE FOAM DRUM SUPPORT AND REPLACE THE METAL BOTTOM PAN, THE BOTTOM OF THE MACHINE MUST BE ACCESSED. SHIPPING BOLTS MUST REMAIN IN THE APPLIANCE WHILE ACCOMPLISHING THIS STEP IN THE PREPARATION PHASE OF THE INSTALLATION. Inspecting WHEN TO REMOVE SHIPPING BOLTS! WARNING!!! TIPPING THE MACHINE TO POSITION IT FOR USE MUST BE DONE WITH THE SHIPPING BOLTS STILL IN THE MACHINE! TIPPING THE MACHI

ملخص المحتوى في الصفحة رقم 5

Installing/Removing Getting things ready to install your appliance (continued) Electricity Make sure that the voltage and frequency available correspond with the values stated on the data plate located at the back of the machine and that the electric system is dimensioned to withstand the maximum current shown on the data plate. If the socket the machine is connected to does not correspond with the plug, replace the plug with a suitable one and avoid using adapters or shunts since they could

ملخص المحتوى في الصفحة رقم 6

Installing/Removing Getting things ready to install your appliance (continued) Plumbing - Water, Drains WATER CONNECTION 1. This appliance can be used with either hot/cold or cold/cold connections. 2. The hoses supplied have either a straight end or an elbow end. The elbow end is meant to connect to the washer. Be sure to connect the hot hose to the hot side of the appliance itself, the cold side to the cold connection. (See picture) The straight end to the 3/4” BSP standard hose bib thread