Cornelius P/N 629087002 دليل المستخدم

ملخص المحتوى في الصفحة رقم 1

IMI CORNELIUS REMCOR INC g 500 REGENCY DRIVE g GLENDALE HEIGHTS, IL 60139--2268
Telephone (800) 551--4423 Facsimile (800) 519--4423
INSTALLATION INSTRUCTIONS
FOR
ICEMAKER ADAPTER KIT (P/N 629087002) AND (P/N 629087003)
For Hoshizaki Model Series: KM/KML 200/250/400/450/500/600/630/650
Kit Part No. Dispenser Model
629087002 DF/ED150 -- 6 Valve (22 inches wide)
629087003 DF/ED 150 -- 8 Valve (24--1/2 inches wide)
Table 1. Loose-Shipped Parts
Item
No. Part No. Name Qty.
1 620034802 Adapter Lid (629

ملخص المحتوى في الصفحة رقم 2

B. Set the Icemaker onto the lid. Note: If installing the Icemaker from front of the Dispenser, use a length of 3/4--inch diameter or larger PVC pipe as a “roller” to slide the Icemaker over the front “drip” flange of the Dispenser lid. C. Wipe away any excess RTV. 4. Using the slotted holes in the adapter lid as a template, drill four (4) .147 diameter holes (No. 26 drill) into the Dispenser cabinet (see detail A of Figure 1). Use extreme care not to drill into the ice storage bin. Secure the l

ملخص المحتوى في الصفحة رقم 3

DETAIL “A” ICEMAKER 22” LOCATE ICEMAKER FLUSH WITH REAR OF ADAPTER LID AND CENTERED ON LID DRILL ø .147 HOLES USING BOTTOM 2--PLACES OF SLOTTED HOLES AS A TEMPLATE 4 3 1 2--PLACES 2 26.5 BASE 4 C B SEAL ICEMAKER TO ITEM 1 WITH ITEM 6 (RTV) 5 10 4 SEE DETAIL “A” ICEMAKER LOCATION LID “B”DIM DIM C 22 IN. FLUSH W/ SIDES OF LID 24--5/8 IN. 1--5/16 IN. FIGURE 1. 620917305 3

ملخص المحتوى في الصفحة رقم 4

ICEMAKER WITH FRONT PANEL REMOVED SEE DETAIL “A” ADAPTER LID WITH MANUAL FILL COVER REMOVED DETAIL “A” ICEMAKER RIGHT SIDE WALL ICEMAKER BIN T’ STAT ”THUMBSCREW” 9 7 8 ICEMAKER BIN T’ STAT WHITE PLASTIC MOUNTING BRACKET FIGURE 2. 620917305 4