Cornelius "K" STYLE LID ED150 دليل المستخدم

ملخص المحتوى في الصفحة رقم 1

ED150 “K” Style Lid Kit Installation Instructions
INSTALLATION INSTRUCTIONS
ED150 “K” STYLE LID KITS (P/N 08008, 02390)
ON
THE FOLLWING ICE MAKER UNITS
Table 1. Applicable Ice Maker Models
ICEMAKER MODELS SIZE (WIDTH)
Cornelius 322/522 (includes AC/WC 322) 22”
Crystal Tips 200/300/400 22”
Ice-O-Matic GC 300/550 22”
Manitowoc 320/420 22”
Scotsman SLC 300/400 22”
Servend S2/4 22”
Table 2. Loose Shipped Parts
Item No. Part No. Name Qty.
52994 Cover, Gray - 08008 1
1
52934 Cover, Black - 02390 1
2

ملخص المحتوى في الصفحة رقم 2

ED150 “K” Style Lid Kit Installation Instructions 1. Unpack kit. 2. Place insulation strip (item 12) over studs on the ice baffle (item 10) and insert ice baffle into the lid assembly (item 2). 3. Place (2) sealing washers (item 9) over studs and (2) flat washers (item 11), then fasten in place with (2) plastic acorn nuts (item 8). 4. Set ice maker lid assembly on the top of the dispenser. 5. Using the slotted holes in the lid as a template, drill four (4) 0.140" diameter (9/64") holes at the

ملخص المحتوى في الصفحة رقم 3

ED150 “K” Style Lid Kit Installation Instructions Figure 1. ED150 Kit © 1996-2010, IMI Cornelius Inc. - 3 - Publication Number: 92111INS

ملخص المحتوى في الصفحة رقم 4

ED150 “K” Style Lid Kit Installation Instructions Figure 2. Dispenser Assembly Publication Number: 92111INS - 4 - © 1996-2010, IMI Cornelius Inc.