Manitowoc Ice K00049 دليل المستخدم

ملخص المحتوى في الصفحة رقم 1

K00049 STACKING KIT
Installation Instructions

These instructions are for stacking an E-0400, G-0400, or G-0600 ice machine on a G-1200 ice machine. The bin must be
level before proceeding.

PARTS LIST:

Item Description Qty. P/N
1. Ice Chute Weldment 1 6639714
2. Top Cover 1 6870914
3. Water Shield 1 6639814
4. Top Mounting Bracket 1 6639914
5. Bottom Mounting Bracket

ملخص المحتوى في الصفحة رقم 2

A. Carefully unwind bulb and tubing and feed down from top ice machine and through right side of opening of lower ice machine. B. Mount bulb of thermostat making sure tubing is clear of ice drop zone. C. Remove electrical box front cover from G-0600 ice machine and connect the leads (as shown in Illustration 5 for air and water-cooled machines and Illustration 6 for remote machines). Place wiring diagram provided in kit over existing diagram on the G-0600 ice machine front panel. D. Use

ملخص المحتوى في الصفحة رقم 3

Sheet 3 of 10 Rev. 05/17/01 8003293 Sheet 4 of 10 Rev. 05/17/01 8003293 Sheet 5 of 10 Rev. 05/17/01 8003293 Sheet 6 of 10 Rev. 05/17/01 8003293 Sheet 7 of 10 Rev. 05/17/01 8003293 Sheet 8 of 10 Rev. 05/17/01 8003293 Sheet 9 of 10 Rev. 05/17/01 8003293 Sheet 10 of 10 Rev. 05/17/01