Cornelius P/N 620028801 دليل المستخدم

ملخص المحتوى في الصفحة رقم 1

IMI CORNELIUS REMCOR INC g 500 REGENCY DRIVE g GLENDALE HEIGHTS, IL 60139--2268
Telephone (800) 551--4423 Facsimile (800) 519--4423
INSTALLATION INSTRUCTIONS
FOR
ED150-8V “K” STYLE LID KIT
(P/N 629084002 AND 629084009)
THIS “K” STYLE KIT APPLIES TO THE FOLLOWING ICE
MAKERS:
Ice Maker Width
AC and WC Cornelius 322/522 22--in.
Table 1. Loose-Shipped Parts
Item
No. Part No. Name Qty.
1 52934 Cover, Gray 1
52994 Cover, Black 1
2 620028801 Lid Assembly 1
3 22127 Bracket 2
4 70217 Screw, No. 8 12
5 50

ملخص المحتوى في الصفحة رقم 2

1. Unpack kit. 2. Place INSULATION STRIP (Item 12) over studs on the baffle and Insert baffle assembly into the adapter lid. 3. Place two (2) sealing cap washers (item 9) over studs and two (2) NYLON WASHERS (item11), then fas- ten in place with two (2) ACORN NUTS (item 8). 4. Set ice maker lid on the top of the dispenser. 5. Using the slotted holes in the lid as a template, drill four (4) .140--in. diameter (9/64--in.) holes at the bottom of the slots (see detail A of Figure 1). Use extreme car

ملخص المحتوى في الصفحة رقم 3

ICEMAKER VIEW ”A” ENLARGED 4 (8) PLCS. DRILL 9/64 (.140) DIA. HOLES USING BOTTOM OF SLOTTED HOLES (4) PLCS. AS A TEMPLATE 4 3 6 (2) PLCS. 2 1 VIEW ”A” FIGURE 1. DISPENSER ASSEMBLY 620918802 3

ملخص المحتوى في الصفحة رقم 4

8 BAFFLE AND CAPILLARY 11 AS SHOWN IN PLACE 9 DETAIL Z 12 13 14 10 15 FIGURE 2. BAFFLE 620918802 4

ملخص المحتوى في الصفحة رقم 5

Y 1.500 Y .625 8 11 9 12 SPLIT 25 in. LONG PLASTIC SLEEVING ICE MAKER 13 10 GROMMET HOLE 6--in. BARE CAP TUBE PULL 25--in. OF CAP TUBE OUT OF ICE MAKER DO NOT STRAGHTEN “S” CLIP FIGURE 3. CAPILLARY TUBE LOCATION 620918802 5