Cornelius 2267 دليل المستخدم

ملخص المحتوى في الصفحة رقم 1

IMI CORNELIUS INC.
One Cornelius Place
Anoka. MN 55303-6234
Telephone (800) 238--3600
Facsimile (612) 422--3246
INSTALLATION INSTRUCTIONS
KIT, P/N 2267 & 2329
Remcor model DB100/150 dispenser with:
1. Manitowoc Series B320, 420 Ice Maker -- Refer to Fig 1.
2. Ice-O-Matic Series GC300 Ice Maker -- Refer to Fig 2.
1. Seal cover to dispenser as follows:
A. Apply a bead of RTV on the hopper flange.
B. Set cover onto the dispenser. Be careful not to disrupt the dispenser cabinet labels, if present.
C

ملخص المحتوى في الصفحة رقم 2

APPLY RTV ALONG BOTTOM EDGE OF ICE RAMP AND FRONT HOPPER LIP. COOMPLETE COVER MUST BE SEALED TO HOPPER. ICEMAKER TO BE FLUSH WITH BACK EDGE OF COVER. ADD INSULATION STRIP TO FLANGE OF REMOVABLE LID. APPLY RTV AROUND INSIDE OF ICEMAKER OUTLINE ON DISPENSER COVER TO FORM A SEAL. (SIDES AND FRONT) REMOVE ICEMAKER PANEL SCREWS THAT ARE IN LINE WITH COVER HOLES AND INSTALL MOUNTING BRACKETS WITH SCREWS PROVIDED (4) REMOVABLE FRONT LID FOR MANUAL ICE FILLING. B320 AND 420 APPLY RTV ALONG HOPPER FLANGE