ملخص المحتوى في الصفحة رقم 1
Instructions for use
WASHING MACHINE
Contents
GB
Installation, 2-3-4-5
Unpacking and levelling
GB
Connecting the electricity and water supplies
The first wash cycle
English,1
Technical data
Description of the washing machine
and starting a wash cycle, 6-7
Control panel
Indicator lights
Starting a wash cycle
Wash cycles, 8
Table of wash cycles
Personalisation, 9
Setting the temperature
Setting the spin speed
Functions
IWC 6165 S
Detergents and laundry, 10
Detergent dispenser drawer
Preparing the
ملخص المحتوى في الصفحة رقم 2
Installation Levelling the machine correctly will provide it with stability, ! This instruction manual should be kept in a safe place for GB help to avoid vibrations and excessive noise and prevent it future reference. If the washing machine is sold, transferred from shifting while it is operating. If it is placed on carpet or or moved, make sure that the instruction manual remains a rug, adjust the feet in such a way as to allow a sufficient with the machine so that the new owner is able
ملخص المحتوى في الصفحة رقم 3
65 - 100 cm Connecting the drain hose • the supply voltage is included within the values indica GB ted on the Technical details table (see page 5); Connect the drain hose, without bending it, to a • the socket is compatible with the washing machine’s draining duct or a wall plug. If this is not the case, replace the socket or the drain situated between plug. 65 and 100 cm from the floor; Your appliance is now supplied with a 13 amp fused plug it can be plugged into a 13 amp soc
ملخص المحتوى في الصفحة رقم 4
As the colours of the wires in the lead may not correspond The first wash cycle GB with the coloured markings identifying the terminals in your plug, proceed as follows: Once the appliance has been installed, and before you use Connect Green & Yellow wire to terminal marked E or it for the first time, run a wash cycle with detergent and no or coloured Green or Green & Yellow. laundry, setting the 90°C programme without a pre-wash Connect Brown wire to terminal marked L or coloured cycle
ملخص المحتوى في الصفحة رقم 5
GB Technical data Model IWC 6165 S width 59.5 cm Dimensions height 85 cm depth 53,5 cm Capacity from 1 to 6 kg Electrical please refer to the technical data plate fixed to the machine connections maximum pressure 1 MPa (10 bar) Water connection minimum pressure 0.05 MPa (0.5 bar) drum capacity 52 litres Spin speed up to 1600 rotations per minute Test Programmes according to Programme 2: temperature 60°C and 40°C. 2010/1061 This appliance conforms to the following EC Directives: - 2004/108/
ملخص المحتوى في الصفحة رقم 6
Description of the washing machine and starting a wash cycle Control panel GB WASH CYCLE PROGRESS/ DELAY TIMER indicator lights FUNCTION START/PAUSE ON/OFF button buttons with button with indicator lights indicator light TEMPERATURE DOOR LOCKED knob indicator light Detergent dispenser drawer WASH CYCLE SPIN SPEED knob knob Detergent dispenser drawer: used to dispense DOOR LOCKED indicator light: indicates whether the detergents and washing additives (see “Detergents and door may be ope
ملخص المحتوى في الصفحة رقم 7
Wash cycle phase indicator lights Indicator lights GB Once the desired wash cycle has been selected and has be- gun, the indicator lights switch on one by one to indicate which The indicator lights provide important information. phase of the cycle is currently in progress. This is what they can tell you: Wash Delayed start If the DELAY TIMER function has been activated (see “Per- Rinse sonalisation”), after the wash cycle has been started the indicator light corresponding to the selected delay
ملخص المحتوى في الصفحة رقم 8
Wash cycles Table of wash cycles GB Cycle Detergents Max. load (kg) duration Max. Max. Description of the wash cycle temp. speed Fabric Eco Eco (°C) (rpm) Wash Normal Normal softener Time Time Daily 1 White Cotton: extremely soiled whites. 90° 1600 6 - 125 - 1 White Cotton (1-2): heavily soiled whites and resistant colours. 60° 1600 6 - 190 - 1 White Cotton (2): lightly soiled whites and delicate colours. 40° 1600 6 - 180 - 2 Cotton: heavily soiled whites and resistant colours. 6
ملخص المحتوى في الصفحة رقم 9
Personalisation Setting the temperature GB Turn the TEMPERATURE knob to set the wash temperature (see Table of wash cycles). The temperature may be lowered, or even set to a cold wash . The washing machine will automatically prevent you from selecting a temperature which is higher than the maximum value set for each wash cycle. Setting the spin speed Turn the SPIN SPEED knob to set the spin speed for the selected wash cycle. The maximum spin speeds available for each wash cycle are as follows:
ملخص المحتوى في الصفحة رقم 10
Detergents and laundry Silk: use special wash cycle 7 to wash all silk garments. Detergent dispenser drawer GB We recommend the use of special detergent which has Good washing results also depend on the correct dose of been designed to wash delicate clothes. detergent: adding too much detergent will not necessa- Curtains: fold curtains and place them in a pillow case or rily result in a more efficient wash, and may in fact cause mesh bag. Use wash cycle 7. build up on the inside of your app
ملخص المحتوى في الصفحة رقم 11
Precautions and tips ! This washing machine was designed and constructed in Consumers should contact their local authority or retailer GB accordance with international safety regulations. The fol- for information concerning the correct disposal of their lowing information is provided for safety reasons and must old appliance. therefore be read carefully. General safety • This appliance is not intended for use by persons (inclu- ding children) with reduced physical, sensory or mental capabili
ملخص المحتوى في الصفحة رقم 12
Care and maintenance Cutting off the water and electricity Cleaning the pump GB supplies The washing machine is fitted with a self-cleaning pump • Turn off the water tap after every wash cycle. This will which does not require any maintenance. Sometimes, small limit wear on the hydraulic system inside the washing items (such as coins or buttons) may fall into the pre-cham- machine and help to prevent leaks. ber which protects the pump, situated in its bottom part. • Unplug the washing machi
ملخص المحتوى في الصفحة رقم 13
Troubleshooting Your washing machine could fail to work. Before contacting the Technical Assistance Centre (see “Assistance”), make sure GB that the problem cannot be not solved easily using the following list. Problem: Possible causes / Solutions: The machine does not switch on. • The appliance is not plugged into the socket fully, or not enough to make contact. • There is no power to the socket, or the fuse has blown in the mains plug. The wash cycle does not start. • The door is not closed
ملخص المحتوى في الصفحة رقم 14
The machine is noisy. • There will always be some motor, pump and drum noise during spin. GB The machine wont spin properly. • Out of Balance detected when attempting to go into a spin cycle - If this happens the machine will continue to try to repeat the distribution of the load required before the machine will go into higher spin speeds - This will increase the programme time accordingly. This is a safety feature to prevent damage. Out of Balance can be caused by washing a single heavy it
ملخص المحتوى في الصفحة رقم 15
Assistance 12 Months Parts and Labour Guarantee GB Your appliance has the benefit of our manufacturer’s guarantee, which covers the cost of breakdown repairs for twelve months from the date of purchase. This gives you the reassurance that if, within that time, your appliance is proven to be defective because of either workmanship or materials, we will, at our discretion, either repair or replace the appliance at no cost to you. This guarantee is subject to the following conditions:
ملخص المحتوى في الصفحة رقم 16
195093003.01 07/2011 - Xerox Fabriano After Sales Service GB No one is better placed to care for your Indesit appliance during the course of its working life than us - the manufacturer. Essential Contact Information Indesit Service We are the largest service team in Europe offering you access to 400 skilled telephone advisors and 1100 fully qualified engineers on call to ensure you receive fast, reliable, local service. UK: 08448 224 224 Republic of Ireland: 0818 313 413 www.indesitservice.
