ملخص المحتوى في الصفحة رقم 1
Trouble-shooting
SEMI AUTO WASHING MACHINE
If the laundries fall to the outer side of the spin tub
AWT-80LI
If the laundries fall to the outer side of the spin tub,
Please contact the after-sales service department.
(If there's breakdown, please pull off the power plug before checking) The following
phenomena are not breakdowns sometimes. Please confirm again before sending
it to repair. If there are real breakdowns, please come to the special maintenance
department or
ملخص المحتوى في الصفحة رقم 2
Ï´ºó´¦Àí Ï´ºó´¦Àí Packing list ×°Ïä˵Ã÷ Cleaning the overflow filter Quantity 2. Take off the corrugation pipe. Name Water level Dismantle the upper part of the adjusting lever One piece corrugation pipe inside the User's manual overflow filter ( as indicated in Corrugation Figure 1). Pipe One piece Water inlet hose 3. Cleaning the overflow filter Clean the lint around the filter and flush with tap water. Gland One piece Figure 1 4. Install the overflow
ملخص المحتوى في الصفحة رقم 3
Maintenance Names of the parts Ï´ºó´¦Àí Ï´ºó´¦Àí After using, please clean the lint and eyewinker of the lint filter and overflow filter in time. Otherwise it may influence your using the machine. Please first pull off the power plug from the receptacle before cleaning. Cleaning the lint filter The lint filter must be used during washing. It must be cleaned in time after each using. 1. Take off the lint filter Put hand at the indicated position. Push down to take it off. ( See
ملخص المحتوى في الصفحة رقم 4
Safety precautions ×¢ÒâÊÂÏî Please insert the power cord into When the machine is normally special receptacle with rated vol- using, please put the power plug tage.Be sure to use single-phase at the location easily to be insert- three pins receptacle.The earthing ed and extracted by hand. Be sure Spinning terminal of the receptacle must be to pull the plug off when there's earthed reliably.If possible,please power failure, or the machine is adopt electric leakage protector. being moved, c
ملخص المحتوى في الصفحة رقم 5
Safety precautions ×¢ÒâÊÂÏî Do not stretch hands into the working Do not decompose, repair or alter the Rinsing machine. It is dangerous even if the machine by yourself. rotation is slow. Take special care of the children. Rinse with water-filling 1.Put the laundries Put the laundries into the wash tub. Select suitable current according to the laundries. 2.Adjust the water level Set the water level with water level adjusting lever according to the
ملخص المحتوى في الصفحة رقم 6
Installation and adjustment Please install and adjust the machine according to the requirement of the manual. It is very important to your security and correct operating Midway spinning the machine. Install the lint filter 1.Put the laundries into the spin tub evenly and smoothly. After opening the package,please take out the lint 2.Spin filter from the document bag,install it to the overflow (1) Put the gland in properly. filter of the wash tub.See to the figure. Please put in
ملخص المحتوى في الصفحة رقم 7
O OF FF F O OF FF F O OF FF F How to change the direction of the drain hoses Washing sequence Spin timer Wash selector Wash timer Figure 1 indicates the ex factory installation (To set to below 2 minute, (Strong current, (to set to below 1 minute, Side sectional view first set to 5 minute then standard current) first set to 2 minute then position of the drain hose. turn it back. it can increase turn it back. it can increase Drain hose Fixing hook the service life of the timer).
ملخص المحتوى في الصفحة رقم 8
Preparation before washing Do s and Don ts Ï´Ç°×¼±¸ Ï´µÓÐëÖª The capacity of washing and spinning of the Preparation before washing machine refer to the weight of the 1.Connect the water inlet hose. standard laundries under dry condition that can 2.Confirm that the washing machine is earthed be washed or spinned in one time. reliably . Then insert the power plug into the the largest capacity is only the loading capacity of the drum receptacle. Do not connect the earth termi
