Sanus Systems NF203 دليل المستخدم

ملخص المحتوى في الصفحة رقم 1

Assembly Instructions for Natural Furniture: Model NF203, NF213, NFV49
Thank you for choosing the Natural Furniture line from Sanus Systems. If you have any questions regarding this or any other Sanus
Systems product, please contact us at 800.359.5520 or visit us at www.sanus.com. Our customer service representatives can assist you
quickly with any issues regarding assembly or missing parts. Check carefully to make sure none of the parts are missing or defective.
Never use defective parts. Re

ملخص المحتوى في الصفحة رقم 2

Supplied Hardware List: (12) Allen Bolt - i (4) Washer - j (12) Decorative Face Bolt - k (8) Glass Protector - l (1) Allen Key - m Step 1: Attach the Cross Tubes to the Front Frame Position the Front Frame (a) like it is pictured in Diagram 1. Next, slide each Decorative Face Bolt (k) through the Front Frame, a Three Hole Plate (c) and into a Steel Cross Tube (b). Repeat process until all 12 Steel Cross Tubes are fastened to the Front Frame.

ملخص المحتوى في الصفحة رقم 3

Step 2: Attach the Rear Supports Thread an Allen Bolt (i) through a Washer (j), through the middle hole in a Rear Support (e), through the middle hole in a Three Hole Plate (c) and into the middle Steel Cross Tube (b). See Diagram 2 for assistance. Repeat the process until all 4 middle Allen Bolts, the 4 accompanying Washers, and the Rear Supports are attached to the middle Steel Cross Tubes. Next, thread an Allen Bolt through each hole of the Wire Strap (h), the Rear Support, each outer hole

ملخص المحتوى في الصفحة رقم 4

Step 4: Add Top Glass Shelf Place 4 Glass Protectors (l) evenly along the top of the Front Frame (a). Next, Add 2 Glass protectors to the top of each Rear Support (e). Proceed to place the Top Glass Shelf (g) onto the Glass Protectors. See Diagram 4 for assistance. Diagram 4 g l a l e Step 5: Add Plastic Wire Covers To add the Plastic Wire Covers (f) insert one edge of the Wire Cover into one of the slots in the Rear Suppo