Beckett CG10B دليل المستخدم

ملخص المحتوى في الصفحة رقم 1

Suggested Specification
For
Model CG10, CG10A & CG10B
Beckett Gas Burners




















R.W. Beckett Corporation

_________________________________________________________________________________________________________________________________________________________________________________________________________________


Mail: P.O. Box 1289, Elyria, OH 44036 | Ship: 38251 Center Ridge Rd., North Ridgeville, OH 4403

ملخص المحتوى في الصفحة رقم 2

General Burner Description: Install __________ Beckett Model ________ Gas Burner forced draft flame retention power gas burners. Burners shall be capable of burning ______BTUs (natural gas or propane) with a specific gravity of ____(0.64 or 1.56). Gas Pressure supplied to the burner gas train connection shall be a minimum of _____ inches W.C. (PSIG) at full high rate and a maximum of _____ inches W.C. at static conditions. Each burner shall be listed by Underwriters Laboratories

ملخص المحتوى في الصفحة رقم 3

Mode of Operation: On-Off with low fire start- The main gas supply shall be controlled by a diaphragm regulating gas valve. The air inlet control band and shutter shall be fixed at the optimum fuel/air ratio at the high fire position. Product Liability Insurance: The burner manufacturer will provide an insurance certificate documenting his current coverage of Product Liability Insurance with minimum coverage of $10,000,000. Burner Start up Information and Test Data: On compl

ملخص المحتوى في الصفحة رقم 4

Burner Start Up Information & Test Data Beckett Model ____________________ Serial Number_______________________ Job Location_____________________________________________________________ Start Up Date_____________ Company Name_________________ Technician Name________________ Type of Gas: NAT____ Propane____ Gas Pressure at Train Inlet Flame Signal Readings Draft @ Breech Burner off position ______w.c Low Fire _______DC volts