ملخص المحتوى في الصفحة رقم 1
Model No. 831.294240
Serial No.
TREADMILL EXERCISER
User’s Manual
Serial Number
Decal
• Assembly
• Operation
• Maintenance
• Part List and Drawing
CAUTION
Read all precautions and instruc-
tions in this manual before using
this equipment. Save this manual
Sears, Roebuck and Co., Hoffman Estates, IL 60179
for future reference.
ملخص المحتوى في الصفحة رقم 2
TABLE OF CONTENTS IMPORTANT PRECAUTIONS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .3 BEFORE YOU BEGIN . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .5 ASSEMBLY . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .6 OPERA
ملخص المحتوى في الصفحة رقم 3
IMPORTANT PRECAUTIONS WARNING: To reduce the risk of burns, fire, electric shock, or injury to persons, read the following important precautions and information before operating the treadmill. 1. It is the responsibility of the owner to ensure 12. Failure to use a properly functioning surge that all users of this treadmill are adequately suppressor could result in damage to the con- informed of all warnings and precautions. trol system of the treadmill. If the control sys- tem is damaged, the wa
ملخص المحتوى في الصفحة رقم 4
21. When folding or moving the treadmill, make maintenance and adjustment procedures de- sure that the storage latch is fully closed. scribed in this manual. Never remove the motor hood unless instructed to do so by an 22. Inspect and properly tighten all parts of the authorized service representative. Servicing treadmill regularly. other than the procedures in this manual should be performed by an authorized ser- 23. Never insert any object into any opening. vice representative only. 24.DANGER:
ملخص المحتوى في الصفحة رقم 5
BEFORE YOU BEGIN ® ® Thank you for selecting the new PROFORM 505s this manual, call 1-800-4-MY-HOME (1-800-469-4663). CROSSTRAINER treadmill. The 505s CROSS- To help us assist you, please note the product model TRAINER treadmill combines advanced technology with number and serial number before calling. The model innovative design to help you get the most from your ex- number of the treadmill is 831.294240. The serial num- ercise in the convenience of your home. And when ber can be found on a dec
ملخص المحتوى في الصفحة رقم 6
ASSEMBLY Assembly requires two persons. Set the treadmill in a cleared area and remove all packing materials. Do not dispose of the packing materials until assembly is completed. Note: The underside of the treadmill walking belt is coated with high-performance lubricant. During shipping, a small amount of lubricant may be transferred to the top of the walking belt or the shipping carton. This is a normal condition and does not affect treadmill performance. If there is lubricant on top of the wal
ملخص المحتوى في الصفحة رقم 7
2. With the help of another person, carefully lower the 64 69 66 2 Uprights (69) as shown. Note: It may be helpful to place one foot on one of the Extension Legs [63] as you tip the Uprights. Make sure that the Extension Legs remain 39 in the Uprights. 57 Attach each Extension Leg (63) with two 1” Tek Screws 32 (39) and a Round Base Pad (57) as shown. Attach the 57 66 lower Tek Screw, without the Round Base Pad, first. 32 64 Attach two more Round Base Pads (57) to the base of 57 the Uprights (69
ملخص المحتوى في الصفحة رقم 8
4. Hold the Console Base (47) near the Left Handrail (71). 4 Attach the end of the ground wire on the Console Base to the indicated small hole in the Left Handrail with the Ground 1/2” Ground Screw (75). Wire 47 Small Hole 75 71 5. Set the Console Base (47) on the Right Handrail (72) and 5 the Left Handrail (71). Attach the Console Base with four 3/4” Screws (2). Start all four Screws before tightening 47 them; do not overtighten the Screws. 72 71 2 2 6. Touch the Right Handrail (72) to discharg
ملخص المحتوى في الصفحة رقم 9
7. Press the Upright Wire (42) into the slot in the underside 47 7 of the Console Base (47) in the indicated area. Cover the Upright Wire with the Right Grip Plate (36). Be careful not to pinch the Upright Wire. Tighten three 1/2” Screws (49) into the Right Grip Plate and the Console Slot Ground Base. Wire 42 Attach the Left Grip Plate (32) over the ground wire and the other wires with three 1/2” Screws (49). Be careful 36 32 not to pinch any of the Wires. 49 49 8. Attach the Storage Latch (29)
ملخص المحتوى في الصفحة رقم 10
OPERATION AND ADJUSTMENT TM THE PERFORMANT LUBE WALKING BELT an equipment-grounding conductor and a grounding plug. Plug the power cord into a surge suppressor, Your treadmill features a walking belt coated with and plug the surge suppressor into an appropriate TM PERFORMANT LUBE , a high-performance lubricant. outlet that is properly installed and grounded in IMPORTANT: Never apply silicone spray or other accordance with all local codes and ordinances. substances to the walking belt or the walk
ملخص المحتوى في الصفحة رقم 11
CONSOLE DIAGRAM Displays Pulse Sensor Key Note: If there is a thin sheet of plastic on the console, remove the plastic. Clip Insert the key into the console. A tone will sound and the three displays will light. Test the clip by carefully CAUTION: Before operating the taking a few steps backward until the key is pulled console, read the following precautions. from the console. If the key is not pulled from the console, adjust the position of the clip. • Do not stand on the walking belt when tur
ملخص المحتوى في الصفحة رقم 12
To stop the walking belt, press the Stop button. while inserting the key The Time/Distance display will begin to flash. into the console. An “E” for English miles or an Note: During the first few minutes that the treadmill “M” for metric kilometers will appear in the Speed is used, inspect the alignment of the walking belt, display. Press the Speed and align it if necessary (see page 16). + button to change the Change the incline of the treadmill as desired. unit of measurement. When the desired
ملخص المحتوى في الصفحة رقم 13
HOW TO USE THE HAND WEIGHTS To exercise your upper body as you walk on the treadmill, hold the 2-pound weights at your sides or press the weights above your head. To increase the intensity of your exercise, use the 3-pound or 5-pound weights. The hand weights can be stored in the weight rack. WARNING: Do not use the hand weights at speeds faster than walking speeds. Using weights and not holding the handrails may compromise your ability to maintain your balance. Exercises using weights should be
ملخص المحتوى في الصفحة رقم 14
HOW TO FOLD AND MOVE THE TREADMILL HOW TO FOLD THE TREADMILL FOR STORAGE Before folding the treadmill, adjust the incline to the lowest position. If this is not done, the treadmill may be per- manently damaged. Next, unplug the power cord. CAUTION: You must be able to safely lift 45 pounds (20 kg) to raise, lower, or move the treadmill. 1. Hold the treadmill with your hands in the locations shown at the right. To decrease the possibility of injury, bend your legs and keep your back straight. As
ملخص المحتوى في الصفحة رقم 15
HOW TO LOWER THE TREADMILL FOR USE 1. Hold the upper end of the treadmill with your right hand. Press the storage latch to the left. Pivot the treadmill down until the frame and foot rail are past the storage latch. Storage Latch Catch 2. Hold the treadmill firmly with both hands, and lower the tread- mill to the floor. Do not drop the treadmill frame to the floor. To decrease the possibility of injury, bend your legs and keep your back straight. 15
ملخص المحتوى في الصفحة رقم 16
TROUBLESHOOTING Most treadmill problems can be solved by following the simple steps below. Find the symptom that ® applies, and follow the steps listed. If further assistance is needed, call toll-free 1-800-4-MY-HOME (1-800-469-4663). PROBLEM: The power does not turn on SOLUTION: a. Make sure that the power cord is plugged into a surge suppressor, and that the surge suppressor is plugged into a properly grounded outlet (see page 10). Use only a single-outlet surge suppres- sor that meets all o
ملخص المحتوى في الصفحة رقم 17
PROBLEM: The walking belt slows when walked on SOLUTION: a. Use only a single-outlet surge suppressor that meets all of the specifications described on page 10. b. If the walking belt is overtightened, treadmill perfor- b mance may decrease and the walking belt may be- come damaged. Remove the key and UNPLUG THE 2”–3” POWER CORD. Using the allen wrench, turn both rear roller adjustment bolts counterclockwise, 1/4 of a turn. When the walking belt is properly tightened, you should be able to lift
ملخص المحتوى في الصفحة رقم 18
CONDITIONING GUIDELINES ergy. Only after the first few minutes does your body begin to use stored fat calories for energy. If your goal WARNING: Before beginning this is to burn fat, adjust the speed and incline of the tread- or any exercise program, consult your physi- mill until your heart rate is near the lowest number in cian. This is especially important for individu- your training zone. als over the age of 35 or individuals with pre- existing health problems. For maximum fat burning, adju
ملخص المحتوى في الصفحة رقم 19
SUGGESTED STRETCHES The correct form for several basic stretches is shown at the right. Move slowly as you stretch—never bounce. 1. Toe Touch Stretch Stand with your knees bent slightly and slowly bend forward from 1 your hips. Allow your back and shoulders to relax as you reach down toward your toes as far as possible. Hold for 15 counts, then relax. Repeat 3 times. Stretches: Hamstrings, back of knees and back. 2. Hamstring Stretch Sit with one leg extended. Bring the sole of the opposite foot
ملخص المحتوى في الصفحة رقم 20
PART LIST—Model No. 831.294240 R0204A Key Key Key No. Qty. Description No. Qty. Description No. Qty. Description 1 1 Hood 37 2 2 1/2” Bolt 77 6 Belly Pan Screw 2 15 3/4” Screw 38 4 Washer 78 2 Front Isolator 3 1 Motor Belt 39 6 1” Tek Screw 79 1 Power Cord 4 1 Motor Tension Bolt 40 1 Handrail Cap 80 1 Power Cord Grommet 5 1 Motor Tension Washer 41 1 5/32” Allen Wrench 81 1 Belly Pan 6 1 Motor Star Washer 42 1 Upright Wire 82 2 Belt Guide 7 1 Flywheel 43 1 Console 83 4 Belt Guide Screw 8 1 Motor
