ملخص المحتوى في الصفحة رقم 1
COMMERCIAL PRODUCTS DIVISION
R
COMMERCIAL TREADMILL OWNER’S MANUAL
COMMERCIAL PRODUCTS DIVISION
i
USA
ملخص المحتوى في الصفحة رقم 2
COMMERCIAL PRODUCTS DIVISION Before You Begin Thank you for purchasing the Precor C964i or C962i Commercial Treadmill. Built to the exacting standards of the health club environment, these treadmills are for commercial use and can withstand the rigors of club use with little maintenance. TM The C964i features the Precor Smart Rate system and a CSAFE compatibility option. With the C964i Smart Rate display, users can easily maintain their heart rate intensity within a few beats per minute. The cho
ملخص المحتوى في الصفحة رقم 3
COMMERCIAL PRODUCTS DIVISION IMPORTANT SAFETY INSTRUCTIONS When using an electrical appliance, basic precautions should always be followed, including the following: • Read all instructions before using the C964i or C962i Commercial Treadmill. These instructions were written to ensure your safety and to protect the treadmill. • To ensure the proper use and safety of the C964i or C962i treadmill, make sure that all users read this manual. Please make this manual a part of your training program.
ملخص المحتوى في الصفحة رقم 4
COMMERCIAL PRODUCTS DIVISION Grounding Instructions The C964i or C962i treadmill must be grounded. If it should malfunction or break down, grounding provides a path of least resistance for electric current to reduce the risk of electric shock. The treadmill is equipped with a cord having an equipment-grounding conductor and a grounding plug. The plug must be plugged into an appropriate outlet that is properly installed and grounded in accordance with all local codes and ordinances. If you do not
ملخص المحتوى في الصفحة رقم 5
COMMERCIAL PRODUCTS DIVISION Information Regarding International Use FCC Communications Commission, part 15 The C964i and C962i treadmills have been tested and found to comply with the limits for a Class A digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interfer- ence when the equipment is operated in a commercial environment. The C964i and C962i treadmills generate, use, and can radiate radio frequency energy and,
ملخص المحتوى في الصفحة رقم 6
COMMERCIAL PRODUCTS DIVISION Personal Safety When using the C964i or C962i, take the following precautions: WARNING — MAXIMUM SPEED MAY EXCEED USER’S CAPABILITIES While the C964i or C962i treadmill is set at the manufacturer’s for a maximum speed of 12 miles per hour, the treadmill can be programmed for a maximum speed of 15 mph (24 kph), or 4 minute miles (6 minute kilometers). The higher speed is designed for the occasional use of a highly competitive runner, and may exceed the capabilities o
ملخص المحتوى في الصفحة رقم 7
COMMERCIAL PRODUCTS DIVISION Precor Heart Rate Option—Safety Guidelines The Precor Heart Rate Option was created and designed exclusively for Precor products. Before using this option, read and follow the instructions found in the owner’s manual that accompanies your option kit or chest strap transmitter. The equipment is extremely sensitive—you should use the heart rate option with this in mind and take time to read the following guidelines: • Do not drop the equipment. It might damage the tran
ملخص المحتوى في الصفحة رقم 8
COMMERCIAL PRODUCTS DIVISION Table of Contents Before You Begin.................................................................................. ii About this Manual ....................................................................... ii Obtaining Service ....................................................................... ii Important Safety Instructions ...................................................... iii Grounding Instructions .....................................................
ملخص المحتوى في الصفحة رقم 9
C O M M E R C I A L P R O D U C T S D I V I S I O N Unpacking the Treadmill Your C964i or C962i treadmill is carefully inspected before shipment, so it should arrive in good operating condition. Precor ships the unit in two pieces: the base frame and the upright/console assembly. Carefully unpack the parts from the shipping container. CAUTION: This unit weighs over 350 pounds. To avoid injury and ensure the safety of the unit and yourself, get appropriate assistance before removing the base fram
ملخص المحتوى في الصفحة رقم 10
C O M M E R C I A L P R O D U C T S D I V I S I O N Setting Up the C964 Treadmill Ergometer Setting Up the Treadmill You do not need any special knowledge or experience to set up a C964i or C962i treadmill, however you will need assistance. Because of the size and weight of the treadmill, it is recommended that at least three people assemble it. INSTALLATION REQUIREMENTS Follow the installation requirements below when installing and assembling the treadmill. If you do not install the treadmill a
ملخص المحتوى في الصفحة رقم 11
C O M M E R C I A L P R O D U C T S D I V I S I O N ASSEMBLY INSTRUCTIONS Take the following steps to assemble the C964i or C962i treadmill. We recom- mend that at least three people assemble this treadmill. 1. Unpack the treadmill and remove the packing materials from the base and upright/console assembly. CAUTION: To avoid injury and ensure your safety, get appropriate assistance before lifting the treadmill off the pallet and rolling it onto the floor. Do not drop the unit. 2. Remove the trea
ملخص المحتوى في الصفحة رقم 12
C O M M E R C I A L P R O D U C T S D I V I S I O N Diagram 2 Upright/console assembly Round jacketed cable Bolt holes Security key (optional) Column support mount Base frame 6. Take the following steps to secure the upright/console assembly to the base of the treadmill: a. Position the upright/console assembly so that both the right and left handrail columns align over the column support mounts. Have an assistant thread the round jacketed cable through the left side column support as shown in D
ملخص المحتوى في الصفحة رقم 13
C O M M E R C I A L P R O D U C T S D I V I S I O N Diagram 3 Speed sensor Round cable receptacle Round cable connector Printed circuit board Connect the motor’s power cable to the receptacle on the circuit board Motor 7. Take the cable connector that you threaded through the left side column support in step 6a. and align the tabs on the cable connector with its corresponding receptacle on the printed circuit board. (See Diagram 3.) Make sure that all pins are aligned and fully engaged. The conn
ملخص المحتوى في الصفحة رقم 14
C O M M E R C I A L P R O D U C T S D I V I S I O N CAUTION: Be sure to get the appropriate number of people to help you move the treadmill to its final location. A fully-assembled C964i or C962i treadmill is very heavy and you might injure yourself if you move the treadmill improperly. 11. If you need to move the treadmill, ask for assistance. Roll the treadmill on its front wheels to its new location by lifting the rear end of the unit. CAUTION: Do not remove or otherwise bypass the 3-prong pl
ملخص المحتوى في الصفحة رقم 15
C O M M E R C I A L P R O D U C T S D I V I S I O N 3. Stand next to the treadmill and press QUICK START. The running belt begins moving at 1 mph (1.6 kph) after a warning message scrolls across the display. 4. Continue to stand next to the treadmill and increase the running belt speed to 2 mph (3.2 kph) using the SPEED key. CAUTION: If you hear any chafing or the belt begins to shred, stop the running belt immediately by pressing the STOP key. Turn OFF the unit and do not use the treadmill. Co
ملخص المحتوى في الصفحة رقم 16
C O M M E R C I A L P R O D U C T S D I V I S I O N Using the Commercial Treadmill This section familiarizes you with the C964i/C962i display and the different programs you can use to customize the unit to your customers needs. USING THE CLUB PROGRAM The Club Program lets you customize these features: • Maximum speed—You can set the internal maximum speed of the tread- mill between 1 and 15 miles per hour (1 and 24 kilometers per hour) on both the 120v and 240v units. Once you designate a maximu
ملخص المحتوى في الصفحة رقم 17
C O M M E R C I A L P R O D U C T S D I V I S I O N 2. Check to see that the safety switch is positioned at the green dot. If the safety switch is in the OFF position, the treadmill will not turn ON. Change its position and align it with the green dot. 3. If necessary, turn ON the treadmill using the ON/OFF power switch. This switch is located on the front of the treadmill, near the power cable. 4. When start-up prompt “PRESS ENTER TO BEGIN OR PRESS QUICK START” appears, access the Club Program
ملخص المحتوى في الصفحة رقم 18
C O M M E R C I A L P R O D U C T S D I V I S I O N 10. Once you have completed customizing the course, select ENTER to save the course profile. Note: Any time you are customizing a course on the C964i, you can press STOP and exit the program. Any changes are not saved. The course profile reverts back to the previous profile stored in memory. 11. If you were customizing Course 1, Course 2 appears on the display. You can modify the profile or press ENTER to return to the C964i banner. When the “C
ملخص المحتوى في الصفحة رقم 19
C O M M E R C I A L P R O D U C T S D I V I S I O N Working Out on the Commercial Treadmill The C964i and C962i treadmills are designed so that users can work out without instruction or training. The directions on the console and the prompts on the display will guide a user through the entire workout session. Before the treadmill is used, however, we recommend familiarizing yourself with it so it will be used safely and effectively. This section covers the following information: • instructions f
ملخص المحتوى في الصفحة رقم 20
C O M M E R C I A L P R O D U C T S D I V I S I O N USING THE SAFETY FEATURES Security Lock: A security key can be purchased from your dealer and is optional equipment that can help prevent unauthorized use. It is located near the ON/OFF switch and must be inserted and locked into position before power can be supplied to the treadmill. You can remove the security key, during non- business hours when the treadmill is not being used, and store it in a safe place to prevent unauthorized use. The th
