ملخص المحتوى في الصفحة رقم 1
Model No. GGTL03607.2
Serial No.
USERʼS MANUAL
Write the serial number in the space
above for future reference.
Serial
Number
Decal
QUESTIONS?
As a manufacturer, we are com-
mitted to providing complete cus-
tomer satisfaction. If you have
questions, or if parts are missing,
PLEASE DO NOT CONTACT
THE STORE; please contact
Customer Care.
IMPORTANT: You must note the
product model number and
serial number (see the drawing
above) before contacting us:
CALL TOLL-FREE:
1-877-776-4777
Mon.–Fri. 6 a.m.
ملخص المحتوى في الصفحة رقم 2
TABLE OF CONTENTS WARNING DECAL PLACEMENT . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .2 IMPORTANT PRECAUTIONS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .3 BEFORE YOU BEGIN . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .5 ASSEMBLY . . . . . . . .
ملخص المحتوى في الصفحة رقم 3
IMPORTANT PRECAUTIONS WARNING: To reduce the risk of serious injury, read all important precautions and in- structions in this manual and all warnings on your treadmill before using your treadmill. ICON as- sumes no responsibility for personal injury or property damage sustained by or through the use of this product. 1. Before beginning any exercise program, con- should be on the same circuit. Do not use an sult your physician. This is especially impor- extension cord. tant for persons over the
ملخص المحتوى في الصفحة رقم 4
20. Never leave the treadmill unattended while it 24. Inspect and properly tighten all parts of the is running. Always remove the key, unplug treadmill regularly. the power cord, and switch the reset/off cir- cuit breaker to the off position when the 25. DANGER: Always unplug the power treadmill is not in use. (See the drawing on cord immediately after use, before cleaning the page 5 for the location of the circuit breaker.) treadmill, and before performing the mainte- nance and adjustment proce
ملخص المحتوى في الصفحة رقم 5
BEFORE YOU BEGIN Thank you for selecting the revolutionary GOLDʼS ual. To help us assist you, note the product model num- ® GYM 450 treadmill. The 450 treadmill offers an im- ber and serial number before contacting us. The model pressive array of features designed to make your work- number and the location of the serial number decal are outs at home more enjoyable and effective. And when shown on the front cover of this manual. youʼre not exercising, the unique 450 treadmill can be folded up, re
ملخص المحتوى في الصفحة رقم 6
ASSEMBLY To hire an authorized service technician to assemble the treadmill, call 1-800-445-2480. Assembly requires two persons. Set the treadmill in a cleared area and remove all packing materials. Do not dispose of the packing materials until assembly is completed. Note: The underside of the treadmill walking belt is coated with high-performance lubricant. During shipping, a small amount of lubricant may be transferred to the top of the walking belt or the shipping carton. This is a normal con
ملخص المحتوى في الصفحة رقم 7
1. Make sure that the power cord is unplugged. 1 With the help of a second person, carefully tip the treadmill onto its left side. Partially fold the Tie Frame (48) so that the treadmill is more stable; 77 Hole do not fully fold the Frame yet. 81 Cut the tie securing the Upright Wire (77) to the Base (85). Locate the tie in the indicated hole in 2 48 the Base, and use the tie to pull the Upright Wire out of the hole. Attach a Base Pad (81) to the Base (85) in the 85 location shown with a Base Pa
ملخص المحتوى في الصفحة رقم 8
4. Hold a Bolt Spacer (79) inside the lower end of 4 the Right Upright (78). Insert an M10 x 96mm 5 Bolt (5) with an M10 Star Washer (8) into the Right Upright and the Bolt Spacer. Repeat this 78 step with a second Bolt Spacer (79), M10 x 96mm Bolt (5), and M10 Star Washer (8). 8 77 79 Hold the Right Upright Spacer (80) and the Right Upright (78) against the Base (85). Be careful not to pinch the Upright Wire (77). Tighten the M10 x 96mm Bolts (5) with your fin- 82 79 gers; do not fully tighten
ملخص المحتوى في الصفحة رقم 9
7. Attach the Latch Insert (70) to the Left Upright (73) with 7 two M4.2 x 19mm Screws (1). Make sure that the large hole in the Latch Insert is on the side shown. Do not overtighten the Screws. 72 Locate the Latch Pin Assembly (72). Remove the knob 70 from the pin. Make sure that the collar and the spring 73 are on the pin as shown. Insert the pin into the Latch Knob Collar Insert (70), and tighten the knob back onto the pin. 1 Pin Spring Large Hole 8. Hold the Right Handrail (90) near the Righ
ملخص المحتوى في الصفحة رقم 10
10. Set the console assembly on the Handrails (89, 90); in- 10 Console Assembly sert the excess wiring into the Right Handrail (90). 89 Attach the console assembly with four M4.2 x 19mm 90 Screws (1), two 1/4" x 1/2" Bolts (9), and two 1/4" Star Washers (71) as shown. Make sure that no wires are pinched. Start all four Screws and both Bolts before tightening any of them. See steps 4 and 6. Tighten the four M10 x 96mm Bolts 71 (5). 1 9 1 71 See step 8. Tighten the six M8 x 19mm Bolts (6). 9 11. M
ملخص المحتوى في الصفحة رقم 11
OPERATION AND ADJUSTMENT THE PRE-LUBRICATED WALKING BELT tric shock. This product is equipped with a cord having an equipment-grounding conductor and a grounding Your treadmill features a walking belt coated with high- plug. Plug the power cord into a surge suppressor, performance lubricant. IMPORTANT: Never apply sil- and plug the surge suppressor into an appropriate icone spray or other substances to the walking outlet that is properly installed and grounded in belt or the walking platform. Su
ملخص المحتوى في الصفحة رقم 12
CONSOLE DIAGRAM Key Clip FEATURES OF THE CONSOLE use a classic workout, see page 15. To use the weight loss workout, see page 16. To use the infor- The treadmill console offers an impressive array of mation mode, see page 16. features designed to make your workouts more effec- tive and enjoyable. IMPORTANT: If there are sheets of clear plastic on the console, remove the plastic. To prevent damage When you use the manual mode, you can change the to the walking platform, wear clean athletic shoes
ملخص المحتوى في الصفحة رقم 13
HOW TO TURN ON THE POWER 3. Start the walking belt. IMPORTANT: If the treadmill has been exposed to To start the walking belt, press the Start button, the cold temperatures, allow it to warm to room tem- Speed increase button, or one of the Speed but- perature before turning on the power. If you do not tons numbered 2 through 10. do this, the console displays or other electrical components may become damaged. If you press the Start button or the Speed increase button, the walking belt will begin
ملخص المحتوى في الصفحة رقم 14
The lower left corner To measure your of the display can show heart rate, stand the elapsed time, the on the foot rails distance that you have and place your walked or run during hands on the your workout, and the metal contacts— Metal Contacts incline level of the treadmill. Note: During a classic avoid moving workout, the display will show the time remaining in your hands. the program instead of the elapsed time. When your pulse is detected, the The lower right cor- heart symbol in the display
ملخص المحتوى في الصفحة رقم 15
HOW TO USE A CLASSIC WORKOUT next segment of the profile will begin to flash. If a different speed and/or incline setting is pro- 1. Insert the key into the console. grammed for the next sentence, the new speed and/or incline settings will flash in the display to See HOW TO TURN ON THE POWER on page alert you. 13. The workout will continue in this way until the last 2. Select a classic workout. segment of the profile flashes in the display and the last segment ends. The walking belt will then To
ملخص المحتوى في الصفحة رقم 16
HOW TO USE THE WEIGHT LOSS WORKOUT 5. Measure your heart rate if desired. 1. Insert the key into the console. See step 6 on page 14. See HOW TO TURN ON THE POWER on page 6. Turn on the fan if desired. 13. See step 7 on page 14. 2. Select a weight loss workout. 7. When you are finished exercising, remove the To use the weight loss workout, press the Weight key from the console. Loss Workouts button. Input your weight and the number of calories you wish to burn by repeatedly See step 8 on page 14.
ملخص المحتوى في الصفحة رقم 17
HOW TO FOLD AND MOVE THE TREADMILL HOW TO FOLD THE TREADMILL FOR STORAGE Before folding the treadmill, adjust the incline to the lowest position. If you do not do this, you may damage the treadmill when you fold it. Remove the key and unplug the power cord. CAUTION: You must be able to safely lift 45 lbs. (20 kg) to raise, lower, or move the treadmill. 1. Hold the metal frame firmly in the location shown by the arrow at the right. CAUTION: To decrease the pos- sibility of injury, do not lift the
ملخص المحتوى في الصفحة رقم 18
TROUBLESHOOTING Most treadmill problems can be solved by following the simple steps below. Find the symptom that applies, and follow the steps listed. If further assistance is needed, please see the front cover of this manual. PROBLEM: The power does not turn on SOLUTION: a. Make sure that the power cord is plugged into a surge suppressor, and that the surge suppressor is plugged into a properly grounded outlet (see page 11). Use only a single-outlet surge suppres- sor that meets all of the spec
ملخص المحتوى في الصفحة رقم 19
Remove the three M4.2 x 19mm Washer Head 13 Screws (13) and carefully pivot the Hood (53) off. 53 Locate the Reed Switch (54) and the Magnet (42) on the left side of the Pulley (44). Turn the Pulley until the Magnet is aligned with the Reed Switch. 1/8 in. Make sure that the gap between the Magnet and 1 the Reed Switch is about 1/8 in. (3 mm). If neces- 42 54 sary, loosen the M4.2 x 19mm Screw (1), move the 44 Reed Switch slightly, and then retighten the Screw. Top Reattach the Hood (not shown),
ملخص المحتوى في الصفحة رقم 20
PROBLEM: The walking belt is off-center or slips when walked on SOLUTION: a. If the walking belt is off-center, first remove the a key and UNPLUG THE POWER CORD. If the walking belt has shifted to the left, use the hex key to turn the left rear roller bolt clockwise 1/2 of a turn; if the walking belt has shifted to the right, turn the bolt counterclockwise 1/2 of a turn. Be careful not to overtighten the walking belt. Then, plug in the power cord, insert the key, and run the treadmill for a few
