ملخص المحتوى في الصفحة رقم 1
¨
Patent Pending
Model No. IMHS81590
Serial No.
Write the serial number in the
USERÕS MANUAL
space above for reference.
Serial
Number
Decal
QUESTIONS?
As a manufacturer, we are com-
mitted to providing complete
customer satisfaction. If you
have questions, or if there are
missing parts, we will guarantee
complete satisfaction through
direct assistance from our factory.
TO AVOID UNNECESSARY
DELAYS, PLEASE CALL DIRECT
TO OUR TOLL-FREE CUSTOMER
HOT LINE. The trained techni-
cians on our customer
ملخص المحتوى في الصفحة رقم 2
Table of Contents WARNING DECAL PLACEMENT . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2 IMPORTANT SAFETY INSTRUCTIONS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3 BEFORE YOU BEGIN . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5 CHOOSING A LOCATION FOR THE HYDROTHERAPY SPA . .
ملخص المحتوى في الصفحة رقم 3
Important Safety Instructions WARNING: To reduce the risk of drowning, electric shock, or serious injury, read the following important precautions before using the RENEW 815. READ AND FOLLOW ALL INSTRUCTIONS 1. It is the responsibility of the owner to ensure RENEW 815 when it is not in use. that all users of the RENEW 815 are ade- quately informed of all precautions. 13. Keep all chemicals away from children and pets. 2. Use the RENEW 815 only as described in this manual. 14. The pH and chemica
ملخص المحتوى في الصفحة رقم 4
ation. If the spa jet unit continues to run after 815 if the water temperature is above 100¡F the ÒtestÓ button is pressed, then the GFCI is (38¡C); the unborn child could be seriously damaged. Do not use the RENEW 815 until harmed. the GFCI has been repaired or replaced by a qualified electrician. 27. DANGERÑTo reduce the risk of drowning: Prolonged immersion in the RENEW 815 may 20. Keep all electrical appliances such as radios, cause hyperthermia, a dangerous condition telephones, television
ملخص المحتوى في الصفحة رقم 5
Before You Begin ¨ Thank you for selecting the IMAGE RENEW 815. The Department toll-free at 1-800-999-3756, Monday innovative RENEW 815 offers the features and quality through Friday, 6 a.m. until 6 p.m. Mountain Time of a traditional hot tub at an affordable price. Best of (excluding holidays). To help us assist you, please all, the RENEW 815 is fully portable, so you can take note the product model number and serial number it wherever there is an electrical outlet. The RENEW before calling. Th
ملخص المحتوى في الصفحة رقم 6
Choosing a Location for the Hydrotherapy Spa There are many factors to consider when choosing a location to set up the RENEW 815. These factors vary depending on whether you use the RENEW 815 inside or outside. We have listed several factors you may wish to consider as you decide where you want to use the RENEW 815. If you set up the RENEW 815 inside: If you set up the RENEW 815 outside: 1. The RENEW 815 will increase the level of humidi- 1. You should check your local building codes con- ty in
ملخص المحتوى في الصفحة رقم 7
Assembly Before beginning assembly, carefully read the ¥ Assembly requires the included air pump. following information and instructions: ¥ Read each assembly step before you begin. ¥ Place all parts in a cleared area and remove the packing materials; do not dispose of the packing ¥ During assembly, make sure that all parts are ori- materials until assembly is completed. ented as shown in the drawings. 1. Before beginning assembly, be sure that you 1 have read and understand the information in
ملخص المحتوى في الصفحة رقم 8
2. Orient the dry side jet pack (A) as shown and posi- 2 tion it next to the three holes in the Inflatable Liner Small A 29 (29). Hole Attach the Temperature Probe Assembly (30) to the Receptacle small hole in the Inflatable Liner (29). To do this, place the Temperature Probe Gasket (46) over the 46 Probe connector threads. Insert the wire (not shown) through the hole, then push the Temperature Probe 47 through the hole. Make sure the threads on the con- 30 nector have been pushed fully through
ملخص المحتوى في الصفحة رقم 9
5. Attach the nozzle on the air pump to the valve on 5 29 Air Valve the floor of the Inflatable Liner (29). Use the air pump to fill the bottom of the Inflatable Liner with air. Be extremely careful not to puncture the Liner. You will need to operate the pump by hand for this step. Air Valve Attach the nozzle on the air pump to the valve on the bolster of the Inflatable Liner (29). Fill the bol- ster until there are no wrinkles left. 6. Before you fill the RENEW 815 with water, make 6 29 sure it
ملخص المحتوى في الصفحة رقم 10
Using the Hydrotherapy Spa The RENEW 815 is designed for up to three adults. power cord. You should always test the GFCI before The RENEW 815 holds 268 gallons of water and using the RENEW 815. offers an automatic, programmable heating (70¡F to 104¡F) and filtration system. Grounded circuit capable of carrying 15 or more amps The guidelines below explain how to properly use the RENEW 815. Follow these guidelines to maintain the RENEW 815 for your long-term enjoyment. Test and Reset PRIMING TH
ملخص المحتوى في الصفحة رقم 11
in the spa. Allow the water to circulate for five min- turn. To unlock the buckles, insert the key and turn it utes. You should now test the pH level of the water. counterclockwise a quarter turn. Use the included test strips to check the pH of the water. Refer to the instructions on the test strip pack- Always keep the buckles locked when the spa is aging to see how to use the test strips. not in use. Keep the keys in a safe place, out of the reach of children. If the level is too low, add on
ملخص المحتوى في الصفحة رقم 12
The spa jet unit features an automatic filter cycle and DRAINING THE PUMP freeze protection. If the spa jet unit has not been operated for three hours, the pump will begin circulat- After the RENEW 815 is drained (see DRAINING ing the water for twenty minutes to filter any impuri- THE RENEW 815 above), the pump in the dry side jet ties. Also, if the water temperature falls below 40¡F, pack should also be drained if the RENEW 815 will be the pump will begin circulating and heating the water store
ملخص المحتوى في الصفحة رقم 13
Maintenance CLEANING THE INFLATABLE SPA LINER 4. Keep all chemicals out of the reach of chil- dren and pets. The liner should be cleaned with a mild soap solution. 5. Keep all containers closed tightly when not Do not use solvents. The liner should always be clean in use. and dry before being moved or stored. 6. Never add water to the chemicalsÑalways add the chemicals to the water as directed. CHECKING AND CLEANING THE FILTER 7. Always store chemicals in a cool, dry place. 8. Always keep chemic
ملخص المحتوى في الصفحة رقم 14
Trouble-shooting Most problems can be solved by following the simple steps below. Find the symptom that applies, and follow the steps listed. If further assistance is needed, call our Customer Service Department toll-free at 1-800-999-3756, Monday through Friday, 6 a.m. until 6 p.m. Mountain Time. 1. SYMPTOM: THE SPA WILL NOT OPERATE 6. SYMPTOM: THE WATER DOES NOT HEAT a. Check the power cord. The power cord must a. The heater is attached to the pump in the spa be plugged into a grounded outlet
ملخص المحتوى في الصفحة رقم 15
9. SYMPTOM: THE SPA JET UNIT CAVITATES by running in automatic mode. Allowing the DURING USE spa jet unit to freeze will damage the unit. If you do not want to use the spa during the a. Adjust the water level This usually occurs only winter, store it in a warm, dry location (see when the water level is low. Add water until the WINTER USE AND CARE on page 13). filter and jets are covered. b. This problem is caused by excess air in the 12. SYMPTOM: THE WATER LEVEL DROPS pump circulation system. Ch
ملخص المحتوى في الصفحة رقم 16
Ordering Replacement Parts To order replacement parts, simply call our Customer Service Department toll-free at 1-800-999-3756, Monday through Friday, 6 a.m. until 6 p.m. Mountain Time (excluding holidays). To help us assist you, please be pre- pared to give the following information when calling: 1. The MODEL NUMBER of the product (IMHS81590) ¨ 2. The NAME of the product (IMAGE RENEW 815) 3. The SERIAL NUMBER of the product (see the front cover of this manual) 4. The KEY NUMBER and DESCRIPT
ملخص المحتوى في الصفحة رقم 17
Remove this Part List/Exploded Drawing from the manual. Save this Part List/Exploded Drawing for future reference. Protect Your Spa Investment! Based on customer input, we have determined the that it will take 1 to 3 days (depending on the room key areas you need to be aware of to get maximum temperature) to heat the water in the spa. The good enjoyment from your spa. Please review this sum- news is that once the water is heated, it will maintain mary carefully. Refer to the userÕs manual for
ملخص المحتوى في الصفحة رقم 18
PART LISTÑModel No. IMHS81590 R0799A Key No. Qty. Description Key No. Qty. Description 1 1 Pressure Switch 33 2 1/4Ó Nylon Locknut 2 1 Pump Frame 34 1 3-1 Wire Harness 3 1 Temperature Probe High Limit 35 2 1/4Ó x 3/4Ó Bolt 4 1 Inflatable Cover 36 4 1/4Ó Flat Washer 5 6 #8 x 1/2Ó Screw 37 1 Thermostat Knob 6 1 Cover Panel 38 2 Wet Side Foot 7 1 Overlay 39 2 #8 x 1Ó Control Mounting Screw 8 1 Filter Cap 40 1 Heater Pump Gasket 9 1 Spa Surround 41 2 Wire Tie 10 4 Fixed Jet 42 5 Snap-in Fastener 1
