ملخص المحتوى في الصفحة رقم 1
Geeignet für Premiere
User Guide
ملخص المحتوى في الصفحة رقم 2
ملخص المحتوى في الصفحة رقم 3
Dear customer, Congratulations on your new NOKIA Mediamaster 211 S. Plug & play installation and the user-friendly menu NOKIA NaviBars make this digital receiver particu- larly powerful and easy to use. The instructions for use include interesting tips on handling your digital receiver as well as extensive information on the special Premiere functions. If you have technical queries or questions regarding the product or if you require tips on how to install it, please call our hotline: NOKIA Home
ملخص المحتوى في الصفحة رقم 4
GB 4
ملخص المحتوى في الصفحة رقم 5
Quick guide Satellite dish The satellite dish must have an unobstructed path to the satel- lites. Install the satellite dish according to the instructions. If you already have a satellite dish installed, note that you will need a Universal LNB which works on the frequencies 10.70- 12.75 GHz to be able to handle digital signals. Connecting a TV and a VCR Preparing the Antenna Remote Control RF Satellite dish TV Video SCART SCART See pages 13 and 14 if you want to connect to an analogue satellite
ملخص المحتوى في الصفحة رقم 6
Quick guide One antenna/one LNB configuration Select this alternative if you have one (1) LNB mounted on the antenna. •Press opt to view the predefined channel. LNB type Select the correct LNB type for your configuration. The most common values, including Universal LNB, can be selected us- ing the cursor left/cursor right button. LNB offset voltage If the cable from the antenna is very long, the voltage at the LNB could be too low to change the polarisation. You can increase the voltage to the L
ملخص المحتوى في الصفحة رقم 7
Contents General information 3 NaviBars 23 General information 23 Quick guide 5-6 The “Control” and the “Settings” folders 23 Contents 7 Control folder ☛ User preferences 24 Software end-user license 8-9 Control folder ☛ Edit channels 24-26 Information about the Mediamaster 10 Control folder ☛ Edit satellites 27-28 Remote control 11 Control folder ☛ Timer 29 Front and rear panel 12 Control folder ☛ System info 29 About the smartcard and CI module 13 Control folder ☛ Premiere 29 Gener
ملخص المحتوى في الصفحة رقم 8
Nokia Mediamaster software end-user license IMPORTANT: READ CAREFULLY BEFORE OR USING THE SOFTWARE NOKIA CORPORATION, NOKIA HOME COMMUNICATIONS END-USER SOFTWARE AGREEMENT This Software Agreement (“Agreement”) is between You (either an individual or an entity), the End User, and Nokia Corporation, Nokia Home Communications (“Nokia”). The Agreement authorizes You to use the Software specified in Clause 1 below and which is included in this Nokia digital TV receiver. This is an agreement on end-us
ملخص المحتوى في الصفحة رقم 9
Nokia Mediamaster software end-user license related materials provided by Nokia. Your end-user other entity performing governmental functions; in- rights automatically and immediately terminate cluding governmental research institutions, govern- without notice from Nokia if You fail to comply with mental corporations, or their separate business any provision of this Agreement. In such an event, units (as defined in part 772 of the EAR) which are You must immediately return at Your own cost, this
ملخص المحتوى في الصفحة رقم 10
General information about the Mediamaster Throughout this manual you will notice that the everyday operation of your Mediamaster is based on a series of user friendly on-screen displays and menus. These menus will help you get the most from your Mediamaster, guiding you through installation, channel selection, viewing and many other functions. All functions can be carried out using the buttons on the remote control, and some of the functions can also be carried out using the buttons on the front
ملخص المحتوى في الصفحة رقم 11
Remote control This section describes how to operate the Mediamaster using the buttons on the remote control. The stand-by button has double functionalitys. One function is performed if you gently press the button once and the other function is performed if you hold the button down for a few seconds. Some of the functions can also be performed using the buttons on the front panel. Press once to turn the sound off/on (mute). Press and hold for a few seconds to switch the Mediamaster in and out of
ملخص المحتوى في الصفحة رقم 12
Front and rear panel Front panel Lid to change channels open the lid in order to and to move through insert the CI module menus and the smartcard Slot Slot for a CI module for inserting of a with a smartcard smartcard Indica- Indica- Button tor 1 tor 2 push the button to re- lease a CI module that to put the Mediamaster has been inserted into and take it out of stand-by mode Function LED indicator 1 LED indicator 2 ON Green Green Stand-by Red - Locked to channel Green Red if not locked Remote
ملخص المحتوى في الصفحة رقم 13
About the smartcard and CI module General In order to receive scrambled digital channels, you will need a CI module* (Common Interface) and a smartcard, which can be ob- tained from a Service Provider. There are several different CI modules available on the European market. Each of the CI modules supports a certain kind of CI module encryption system. The Mediamaster supports CI modules which work according to the DVB standard. Depending on the channels that you want to watch, your local dealer
ملخص المحتوى في الصفحة رقم 14
Installation of the Mediamaster The Mediamaster box should contain the following items: •the Mediamaster •a remote control with 2 AAA batteries •a SCART cable (fully connected 1.0 metre) •a mains cable • an owner’s manual with the software license agreement SCART Mains Remote Owner’s cable cable control manual About the SCART sockets The rear panel of the Mediamaster contains 2 SCART sockets (see diagram). When you connect other devices to any of these sockets, always use fully connected SCART c
ملخص المحتوى في الصفحة رقم 15
Installation of the Mediamaster Connecting to the TV • Connect the SCART cable between the main SCART socket on the TV and the TV SCART socket on the Mediamaster. • Connect the TV aerial to the TV. SCART Connecting a TV and VCR Refer to your VCR’s manual for full instructions. • Connect one SCART cable from the main SCART socket on the TV to the TV SCART socket on the Mediamaster. •Connect another SCART cable from the VCR to the AUX SCART socket on the Mediamaster. VCR • Connect the RF cable fro
ملخص المحتوى في الصفحة رقم 16
Installation of the Mediamaster Connecting a HiFi system • Connect an RCA stereo cable from the AUDIO L R sockets on the Mediamaster to the LINE, AUX, SPARE or EXTRA input sockets on your HiFi system. • If available, you can connect a single RCA cable from the DIG- ITAL AUDIO socket on the Mediamaster to a HiFi system that is equipped with digital audio input. This output is also used TM for connecting to an external Dolby digital decoder. Note: To avoid interference you must use a screened aud
ملخص المحتوى في الصفحة رقم 17
First time installation General information Once you have correctly connected the Mediamaster, you will also have to perform a “First-time installation.” During this pro- cedure, helpful information is displayed at the bottom of the menus. Please note! The select button always confirms a selection within these menus, and pressing it will take you to the next step in the instal- lation process. However, and this is important, more than one value often has to be entered in a menu. Firstly, make al
ملخص المحتوى في الصفحة رقم 18
First time installation One antenna/one LNB configuration Select this alternative if you have one (1) LNB mounted on the antenna. •Press opt to view the predefined channel. LNB type Select the correct LNB for your configuration. The most common values, including Universal LNB, can be selected using the cur- sor left/cursor right button. LNB offset voltage If the cable from the antenna is very long, the voltage at the LNB could be too low to change the polarisation. You can increase the voltage t
ملخص المحتوى في الصفحة رقم 19
First time installation Typical connection of a two-way DiSEqC switch: • Connect the cable from the LNB that is intended for channels from the ASTRA satellite (or THOR) to the connector marked LNB 1 (A) on the switch. • Connect the cable from the HOTBIRD satellite (or SIRIUS) to the connector marked LNB 2 (B). • Then, connect the antenna cable to the connector marked OUT on the switch. • Connect the other end of this cable to the ANTENNA input at the rear of the Mediamaster. For each LNB that yo
ملخص المحتوى في الصفحة رقم 20
First time installation Motor antenna configuration If you have an antenna motor to control your satellite antenna you must configure the following settings. • From the “Antenna/Satellite selection” menu select option 3 “Motor Antenna Configuration” and press select. Type of motor • Select SATSCAN (ASTRA) if you have a Nokia SatScan motor. • Select DiSEqC (Hotbird) if the motor that you have is control- led by DiSEqC commands. LNB type • Select the correct LNB type for your configuration, e.g. “
