ملخص المحتوى في الصفحة رقم 1
D-Link
DVG-2001S
VoIP Terminal Adapter
Manual
Building Networks for People
Ver 1.00
651US2001S15
ملخص المحتوى في الصفحة رقم 2
Contents Package Contents........................................................................................................... 1 Introduction ..................................................................................................................... 1 Connections .................................................................................................................... 2 LEDs...........................................................................................
ملخص المحتوى في الصفحة رقم 3
Help............................................................................................................................ 26 Technical Specifications.............................................................................................. 27 Frequently Asked Questions ....................................................................................... 29 iii
ملخص المحتوى في الصفحة رقم 4
Package Contents • D-Link DVG-2001S VoIP Terminal Adapter • Power Adapter - DC 12V, 1.2A • Manual and Warranty on CD • Quick Installation Guide • Ethernet Cable (the DVG-2001S’s Ethernet port is Auto-MDIX) If any of the above items are missing, please contact your reseller. Note: Using a power supply with a different voltage rating than the one included with the DVG-2001S will cause damage and void the warranty for this product. Introduction The D-Link DVG-2001S VoIP Terminal A
ملخص المحتوى في الصفحة رقم 5
Connections The Ethernet Port (LAN) is auto MDI/MDIX, meaning you can use either a straight-through or a crossover Ethernet cable. Power Adapter Phone Connection Connect your Connect to your phone 12V 1.2A power using standard phone adapter here. cabling. Factory Reset button Auto MDI/MDIX LAN Port Connect the Ethernet cable from computers on your LAN to this port. 2
ملخص المحتوى في الصفحة رقم 6
LEDs Phone LED This LED will light when a telephone is off the hook. A blinking LED indicates an incoming call is detected LAN LED Power LED An active LED indicates A solid light a link has been indicates a valid established. A blinking connection to LED indicates activity on the power the LAN port. supply. 3
ملخص المحتوى في الصفحة رقم 7
Features One Foreign Exchange Subscriber (FXS) POTS port (RJ-11 Jack) One NWay 10/100BASE-TX Fast Ethernet port for network connection Voice Activity Detection (VAD)/Comfort Noise Generation (CNG) Silence suppression to reduce bandwidth consumption Adaptive jitter buffer for smooth voice reception Lost packet recovery ability for improved voice quality Support QoS (Quality of Service) for voice quality guarantee Built-in PPPoE function to support dial-up connection for broadband
ملخص المحتوى في الصفحة رقم 8
Using the Configuration Wizard 10.1.1.1 Whenever you want to configure your network or the DVG-2001S, you can access the Configuration Menu by opening the web-browser and typing in the IP Address of the DVG-2001S. The DVG-2001S default IP Address is shown to the right: • Open the web browser • Type in the IP Address of the Router (http://10.1.1.1) • Type admin in the User Name field • Type admin in the Password field • Click OK The Home >
ملخص المحتوى في الصفحة رقم 9
Home > WAN > Dynamic IP Address Dynamic IP Address Choose Dynamic IP Address to obtain IP Address information automatically from your ISP. This option should be selected if your ISP has not supplied you with an IP address. This option is commonly used for Cable modem services. Host Name The Host Name is optional but may be required by some ISPs. The default host name is the device name of the VoIP Terminal Adapter and may be changed. MAC Address The default MAC Address is set to the
ملخص المحتوى في الصفحة رقم 10
Primary/Secondary Enter a DNS Address if you wish not to use the address provided by DNS Address your ISP. Home > WAN > Static IP Address Static IP Address Choose Static IP Address if all WAN IP information is provided to you by your ISP. You will need to enter in the IP address, subnet mask, gateway address, and DNS address(es) provided to you by your ISP. Each IP address entered in the fields must be in the appropriate IP form, which are four octets separated by a dot (x.x.x.x
ملخص المحتوى في الصفحة رقم 11
IP Address Input the public IP Address provided by your ISP. Subnet Mask Input your Subnet mask. (All devices in the network must have the same subnet mask.) Default Gateway Input the public IP address of the ISP to which you are connecting. Primary DNS Address Input the primary DNS (Domain Name Server) IP address provided by your ISP Secondary DNS Address This is an optional DNS Address entry to be used if the primary DNS Fails. Home > WAN > PPPoE Choose PPPoE (Point to Point P
ملخص المحتوى في الصفحة رقم 12
PPPoE Choose this option if your ISP uses PPPoE. (Most DSL users will select this option.) User Name Enter The PPPoE user name provided to you by your ISP. Password Enter The PPPoE password provided to you by your ISP. Retype Password Retype the password entered in the previous field. IP Address This displays the current IP address. Primary DNS Address Input the primary DNS (Domain Name Server) IP address provided by your ISP. 9
ملخص المحتوى في الصفحة رقم 13
Secondary DNS Address This is an optional DNS Address entry to be used if the primary DNS fails. Click Apply to set any changes made to the memory of the VoIP Terminal Adapter. Click Connect to initiate a PPPoE connection. Click Disconnect to end a PPPoE connection. 10
ملخص المحتوى في الصفحة رقم 14
Advanced > VOIP > Server Configuration The VoIP Terminal Adapter can be configured to handle voice signals over the Internet Protocol (Voice Over IP − VOIP). The screen shown to the right, along with those on the following pages are used to configure your router to communicate with the devices that will send and receive telephone calls over the Internet. Server FQDN Use this drop-down menu to Enable or Disable the Server Fully Qualified Domain Name (FQDN) function. This is d
ملخص المحتوى في الصفحة رقم 15
Select TEL-URL to have the router use the SIP number without a domain name in the SIP messages that it sends. User Parameter Phone You can set this to Enabled or Disabled. This determines whether or not the phone number is appended to the information forwarded to your SIP server. Your VoIP service provider will instruct you on which setting to use. Caller ID Delivery You can set this to YES or NO. This determines whether CID is received. Display CID You can set this to Enabled or Dis
ملخص المحتوى في الصفحة رقم 16
Advanced > VOIP > Provisioning Provisioning is a function that automatically updates your DVG-2001S’s VoIP configuration by using a TFTP server located on the Internet. If you have accesses to such a service, you will need to know the URL and Proxy Address of the Provisioning Server. Provisioning Function Use this drop-down menu to enable or disable the Provisioning Function on the VoIP Terminal Adapter. SSL Use the drop-down menu to enable Secure Shell (SSL). Server URL Ente
ملخص المحتوى في الصفحة رقم 17
Advanced > VOIP > STUN Configuration Simple Traversal of UDP over NAT (STUN) − is a protocol that enables a VoIP device, such as this router or an IP phone, to detect the presence and type of NAT behind which the phone is placed. This router supports STUN and can intelligently modify the private IP address and port in its SIP/SDP message by using the NAT mapped public IP address and port through a series of STUN queries against a STUN server located on the public Internet. Thi
ملخص المحتوى في الصفحة رقم 18
Advanced > VOIP > User Agent The VoIP Terminal Adapter can be configured to handle voice signals over the Internet Protocol (Voice Over IP − VOIP). Same Phone Number Use this field to enable or disable the use of the same telephone number for the User Agent as for the Server Agent. Index Use this field to assign the telephone socket (on the back of the router) to the information entered in the User Agent. Phone Number The telephone number assigned to the User Agent. Domain Name The
ملخص المحتوى في الصفحة رقم 19
Advanced > VOIP > Peer to Peer The VoIP Terminal Adapter can be configured to handle voice signals over the Internet Protocol (Voice Over IP − VOIP). Index This field assigns the telephone socket (on the back of the router) to the information entered in the User Agent. Phone Number The telephone number assigned to this entry. User IP Address Enter the IP address of the remote peer in this field. Port Enter the UDP port number the remote peer will use to make the connection in this
ملخص المحتوى في الصفحة رقم 20
Advanced > VOIP > Telephony The VoIP Terminal Adapter can be configured to handle voice signals over the Internet Protocol (Voice Over IP − VOIP). DTMF Method Out-of band Dual Tone Multi-frequency – The Dual Tone Multi-frequency (DTMF) mode sets how the router will handle the tones that your telephone makes when you push its buttons. It is recommended that you use the same mode that your VoIP service provider uses. Select Enabled (RFC 2833) to send the DTMF tones in RTP packets.
