Bushnell 78-9512 دليل المستخدم

ملخص المحتوى في الصفحة رقم 1

DEEP SPACE SERIES
420 x 60 Refractor Telescope
Model 78-9512
17 16
1
15
14
2
13
3
12
4
11
10
5
9
7 8
6
1. 60mm Objective Lens 9. Tripod Leg - Lock Screws
2. Telescope Main Tube 10. Rack & Pinion Focus Mechanism
3. Altazimuth Yoke Mount 11. Diagonal Mirror
4. Azimuth Lock Knob 12. Eyepiece
5. Tripod Legs 13. Finderscope Mount
6. Tripod Leg Middle Section 14. Finderscope Focus Adjustment
(
7. Accessory Tray Brace 15. Finderscope Adjustment Screws
16.

ملخص المحتوى في الصفحة رقم 2

STANDARD EQUIPMENT • Complete Main Telescope Assembly • Full Length Variable-Height Hardwood Tripod • Altazimuth Yoke Mount • 5mm, 20mm focal length - Eyepieces • Diagonal Mirror, 3x Barlow Lens, Erecting Lens • 5 x 24mm Finderscope w/focus adjustment, Accessory Tray • Hardware Pack: 11 Tripod leg: 3-2_”bolts, 6- /16 washers and 3-wingnuts Accessory tray: 3-_” bolts, 6-_” washers and 3-wingnuts Tripod Leg Lock Screws: 3 pc. TELESCOPE ASSEMBLY 1. Remove all components from the carton and identi

ملخص المحتوى في الصفحة رقم 3

HOW TO USE YOUR NEW TELESCOPE Astronomical telescopes are designed such that the image you see will appear UPSIDE DOWN and REVERSED, this is acceptable for viewing celestial bodies. For land-based viewing an “Erecting Lens” is used to properly re-orient the image. Selecting an eyepiece: 1. You should always start viewing with the lowest power eyepiece, which in this case is the 20 mm lens. Note: the base power of each eyepiece is determined by the focal length of the telescope objective lens, wh

ملخص المحتوى في الصفحة رقم 4

Telescope LIFETIME LIMITED WARRANTY Your telescope is warranted to be free of defects in materials and workmanship for the lifetime of the original owner. The Lifetime Limited Warranty is an expression of our confidence in the materials and mechanical workmanship of our products and is your assurance of a lifetime of dependable service. If your telescope contains electrical components the electronic components are warranted to be free of defects in materials and workmanship for one year after th