ABC Office 1071 دليل المستخدم

ملخص المحتوى في الصفحة رقم 1

“When You Need More Than Staples.”
Toll Free: 800-658-8788
Fax: 801-927-3037
info@abcoffice.com

IDEAL CUTTERS
Model 1038 Model 1058
Model 1071 Model 1080
Model 1110















1. Knife guard
2. Manual clamp
3. Knife carrier
4. Front gauge with narrow-strip-cutting
device
5. Paper supports
6. Back gauge
7. Side lay with cm / inch scale
8. Rotary knob for adjustment of front
gauge
9. Locking screw for front gauge
10. Collapsible extension table
11

ملخص المحتوى في الصفحة رقم 2

Safety Regulations IDEAL Trimmers comply with international safety regulations and are safety-tested. All trimmers are provided with approved safety guards (#1). For a safe operation of the trimmers it is important, that the knife guard is not taken off. The knife carrier (#3) is fitted with a friction device. If adjusted correctly, this friction device insures, that the knife carrier (#3) with the knife cannot move down on its own from any position. If the blade and blade

ملخص المحتوى في الصفحة رقم 3

IDEAL 1071 • Place clamp with knife guard (A) as illustrated on the machine. The knife guard must be caught behind the guiding screw (B). Turn allen screws into fixing points and tighten. Allen wrench and screws are packed with the machines. IDEAL 1080 and IDEAL 1110: • Remove two hex nuts on fixing points of the clamp bar and open knife slightly. Place knife guard with attached clamp bar (A) on machine. Make sure, that the knife guard is caught behind the guiding bracket (B). S