Blue Sea Systems 9009 دليل المستخدم

ملخص المحتوى في الصفحة رقم 1

W ARNING
Marine Electrical Products
 These instructions are intended to provide assistance with the
AC Rotary Switch installation of this product, and are not a substitute for a more
comprehensive understanding of electrical systems. We strongly
recommend that a competent electrical professional perform the
2 Positions + OFF , 2 Pole
installation of this product.
 If either the switch front or back is to be exposed to water it must be
9009/9011
protected with a waterpr

ملخص المحتوى في الصفحة رقم 2

Installation (continued)  T est Shore Connection to Switch  T est Shore Power Disconnect the shore power cord from the shore power source Connect the shore power cable to the shore power source. Turn and bring the shore plug aboard to a point close to the switch on the shore source to make power available to the boat. panel. Connect the other end of the shore cord to the boat’s a. Turn the selector switch to SHORE. No Reverse power inlet. Turn ON the shore power circuit breaker bet

ملخص المحتوى في الصفحة رقم 3

Installation (continued) W iring Diagram AC Rotary Selector Switch 0.197" PN 9009 / PN 9011 Ø 5mm 0.394-0.590" 4 PLACES Ø 10.00-15.00mm 0.197" 0.315-0.590" Ø Ø 5mm 8.00-15.00mm 4 PLACES 1.890" 48.00mm 1.417" 36.00mm 1.417" 1.890" 36.00mm 48.00mm Panel Mounting Panel Mounting Hole Pattern Hole Pattern PN 9009 PN 9011 Panel Mounting Assembly 6670 Rev 002 Page 3 of 3