ملخص المحتوى في الصفحة رقم 1
HEARTH PRODUCTS
KITS AND ACCESSORIES
DIRECT VENT
750,207M
CHASE TOP SQUARE
REV. A 07/2007
VERTICAL TERMINATIONS
INSTALLATION INSTRUCTIONS FOR BLACK - SV4.5CTS-B (CAT. NO. H4716) & SV8CTS-B (CAT. NO. H6179)
AND TERRA COTTA - SV4.5CTS-TC (CAT. NO. H4717) & SV8CTS-TC (CAT. NO. H6180) TERMINATIONS
GENERAL INFORMATION
The SV4.5CTS and SV8CTS series terminations are designed to be
installed on top of locally fabricated chimney enclosure, referred to
SV4.5CTS
herein as a chase. The terminations are d
ملخص المحتوى في الصفحة رقم 2
CHASE CONSTRUCTION INSTALLATION STEPS The chase is a hollow vertical enclosure framed as a part of the building Step 1. Install the gas appliance in accordance with its installation instructions. and covered with a suitable exterior veneer. Always consult local building codes for approved chase construction techniques. Step 2. Determine the chimney height vent configuration and number of The chase flashing, fabricated locally, is used to anchor the termination strait direct vent pipe sections
ملخص المحتوى في الصفحة رقم 3
Step 8. Once the termination is positioned, secure it to the chase VERTICAL VENT TERMINATION CLEARANCES flashing using the stainless steel screws provided, through the pre- punched attachment holes in the attachment tabs of the termination. These instructions should be used as a guideline and do not super- Be careful not to over tighten the screws so as to strip out the chase sede local codes in any way. Install SV4.5 vent according to the current flashing. In the event of a strip, a larger s
ملخص المحتوى في الصفحة رقم 4
The manufacturer reserves the right to make changes at any time, without notice, in design, materials, specifications, prices and also to discontinue colors, styles and products. Consult your local distributor for fireplace code information. Printed in U.S.A. © 2006 by Lennox Hearth Products P/N 750,207M REV. A 07/2007 1110 West Taft Avenue • Orange, CA 92865 NOTE: DIAGRAMS & ILLUSTRATIONS NOT TO SCALE. 4