Lennox Hearth Signature ADAGIO-pF دليل المستخدم

ملخص المحتوى في الصفحة رقم 1

HEARTH PRODUCTS
KITS AND ACCESSORIES
Cat. No Model Description
750,231M
REV. NC 06/2008
h5773 ADAGIO-AG Arched Face Black Facade
h5774 ADAGIO-pF Arched Face Brushed Nickel Facade
TM
INSTALLATION INSTRUCTIONS FOR FACADE KITS
FOR USE wITh ADAGIO™ DIRECT -VENT GAS FIREpLACES
KIT CONTENTS:
Installer: Leave This Instruction Sheet With The Appliance.
Consumer: Retain This Instruction Sheet For Future Reference.
Facade Kit Filigree Inset Kit
1 ea. Facade Assembly (1) 1 ea. Upper Filigree inset (2)

ملخص المحتوى في الصفحة رقم 2

3. Using a 3/8” socket or nutdriver, install the upper filigree inset, lower 6. See Figure 4 for instructions on accessing the control compart- filigree inset, screen and screen retainer with provided washers and ment. nuts as shown in Figure 2. Note: you will have four extra washers and nuts. 4. Reinstall heat shield aligning the top corners of the heat shield with the etch marks in the back of the facade for proper placement. Do not over tighten nuts. Control Compartment Panel Etch Marks