ملخص المحتوى في الصفحة رقم 1
FIREPLACE KITS
AND ACCESSORIES
750,210M
BI-FOLD GLASS DOORS
Rev. A 07/2006
INSTALLATION INSTRUCTIONS FOR OUTDOOR BI-FOLD GLASS DOORS
MODELS: 36BFOD-BS & 42BFOD-BS
INSTALLATION INSTRUCTIONS
Remove Screens And Rods:
Using a 5/16" socket or nutdriver, remove the screen rod assemblies
(see Figure 1 ). Remove the screen rod screws as shown in Figure 1.
Pull out the rods from locating holes on the side of the firebox opening.
IMPORTANT! REINSTALL SCREEN ROD SCREWS INTO THE EXISTING
HOLES WHERE REMO
ملخص المحتوى في الصفحة رقم 2
Hood Installation: After assembly, the frame inserts under the hood as shown in Figure 4 and drops down inside the opening without fasteners. Begin the assembly by installing the hood (packaged separately). Be certain to remove any protective plastic coatings for the stainless steel parts before installing those components. Step 1. Turn off the fireplace and allow it to cool before proceeding. Step 2. Place the hood lip under the face top opening, as shown in Figure 2 - Step 1. Attach the ho
ملخص المحتوى في الصفحة رقم 3
IMPORTANT: THE FINISH OF THESE DOORS MAY BE PROTECTED WITH A SELF ADHERING PLASTIC COATING THAT MUST BE REMOVED BEFORE HEAT IS GENERATED BY A FIRE IN THE FIREBOX. TO PREVENT MELTING, ENSURE THAT ANY PLASTIC COATING PROTECTING THE FINISH OF THESE DOORS IS REMOVED FOLLOWING INSTALLATION. REFER TO THE FIREPLACE INSTALLATION AND HOMEOWNER'S IN- STRUCTIONS FOR DETAILED INSTRUCTIONS REGARDING THE MAIN- TENANCE OF THE FINISH OF THESE DOORS. CAUTION: THE FRONT-OPEN FIREPLACE OR APPLIANCE SHOULD Lower
ملخص المحتوى في الصفحة رقم 4
Lennox Hearth Products reserves the right to make changes at any time, without notice, in design, materials, specifications, prices and also to discontinue colors, styles and products. Consult your local distributor for fireplace code information. Printed in U.S.A. © 2006 by Lennox Hearth Products 1110 West Taft Avenue P/N 750,210M REV. A 07/2006 Orange, CA 92865 4 NOTE: DIAGRAMS & ILLUSTRATIONS NOT TO SCALE
