ملخص المحتوى في الصفحة رقم 1
DO NOT
DISCARD
Owner’s Manual
Installation and Operation
Model:
SLR-B (COSMO)
NOTICE
DO NOT DISCARD THIS MANUAL
• Important operating • Read, understand and follow • Leave this manual with
and maintenance these instructions for safe
party responsible for use
instructions included. installation and operation.
and operation.
WARNING
WARNING: If the information in these
HOT SURFACES!
instructions is not followed exactly, a fi re
Glass and other surfaces are hot during
or explosion may result c
ملخص المحتوى في الصفحة رقم 2
Read this manual before installing or operating this appliance. Please retain this owner’s manual for future reference. This owner’s manual should be retained for future A. Congratulations reference. We suggest that you keep it with your other Congratulations on selecting a Heat & Glo gas fi replace, an important documents and product manuals. elegant and clean alternative to wood burning fi replaces. The information contained in this owner’s manual, unless The Heat & Glo gas fi replace you h
ملخص المحتوى في الصفحة رقم 3
Safety Alert Key: • DANGER! Indicates a hazardous situation which, if not avoided will result in death or serious injury. • WARNING! Indicates a hazardous situation which, if not avoided could result in death or serious injury. • CAUTION! Indicates a hazardous situation which, if not avoided, could result in minor or moderate injury. • NOTICE: Used to address practices not related to personal injury. Table of Contents A. Congratulations . . . . . . . . . . . . . . . . . . . . . . . . . . . .
ملخص المحتوى في الصفحة رقم 4
13 Finishing A. Framing and Finishing Instructions . . . . . . . . . . . . . . . . . 50 B. Mantel and Wall Projections . . . . . . . . . . . . . . . . . . . . . . . 53 C. Facing Material . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 54 D. Decorative Fronts . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 56 14 Appliance Setup A. Remove Fixed Glass Assembly . . . . . . . . . . . . . . . . . . . . 57 B. Remove the Shipping Materials . . . . . . . . . . . . .
ملخص المحتوى في الصفحة رقم 5
B. Limited Lifetime Warranty Hearth & Home Technologies Inc. LIMITED LIFETIME WARRANTY Hearth & Home Technologies Inc., on behalf of its hearth brands (”HHT”), extends the following warranty for HHT gas, wood, pellet, coal and electric hearth appliances that are purchased from an HHT authorized dealer. WARRANTY COVERAGE: HHT warrants to the original owner of the HHT appliance at the site of installation, and to any transferee taking ownership of the appliance at the site of installation within
ملخص المحتوى في الصفحة رقم 6
B. Limited Lifetime Warranty (continued) WARRANTY CONDITIONS: WARRANTY EXCLUSIONS: - - - - - This warranty is void if: LIMITATIONS OF LIABILITY: 4021-645C 12-29-10 Page 2 of 2 6 Heat & Glo • SLR-B • 2195-900 Rev. P • 12/11
ملخص المحتوى في الصفحة رقم 7
Listing and Code Approvals 1 A. Appliance Certifi cation C. BTU Specifi cations Maximum Minimum Orifi ce Models MODEL: SLR-B Input Input Size (U.S. or Canada) BTU/h BTU/h (DMS) LABORATORY: Underwriters Laboratories, Inc. (UL) US 26,000 N/A #42 TYPE: Vented Gas Fireplace Heater (0-2000 FT) SLR-B (NG) STANDARD: ANSI Z21.88b-2008 CSA 2.33a-2008 CANADA 21,870 N/A #43 Vented Gas Fireplace Heaters (2000-4500 FT) US This product is listed to ANSI standards for “Vented Gas 25,000 N/A .057 (0-2000 FT)
ملخص المحتوى في الصفحة رقم 8
Inspection Note: The following requirements reference various The state or local gas inspector of the side wall horizon- Massachusetts and national codes not contained in this tally vented gas fueled equipment shall not approve the document. installation unless, upon inspection, the inspector ob- serves carbon monoxide detectors and signage installed H. Requirements for the Commonwealth of in accordance with the provisions of 248 CMR 5.08(2)(a)1 Massachusetts through 4. For all side wall
ملخص المحتوى في الصفحة رقم 9
User Guide Operating Instructions 2 • Install a switch lock or a wall/remote control with child A. Gas Fireplace Safety protection lockout feature. • Keep remote controls out of reach of children. WARNING • Never leave children alone near a hot fi replace, whether HOT SURFACES! operating or cooling down. Glass and other surfaces are hot during operation AND cool down. • Teach children to NEVER touch the fi replace. Hot glass will cause burns. • Consider not using the fi replace when children w
ملخص المحتوى في الصفحة رقم 10
CLEAR SPACE 3 FT. IN FRONT OF FIREPLACE C. Clear Space E. Fixed Glass Assembly WARNING! DO NOT place combustible objects in front See Section 14.F. of the fi replace or block louvers. High temperatures may start a fi re. See Figure 2.2. F. Remote Controls, Wall Controls and Wall Avoid placing candles and other heat-sensitive objects on Switches mantel or hearth. Heat may damage these objects. Follow the instructions supplied with the control installed to operate your fi replace: For safety: •
ملخص المحتوى في الصفحة رقم 11
H. Lighting Instructions (IPI) The IPI system may be operated with two D-cell batteries. When using batteries, unplug the transformer. To prolong battery life, remove them when using the transformer. FOR YOUR SAFETY LIGHTING READ BEFORE LIGHTING INSTRUCTIONS (IPI) WARNING: If you do not follow these instructions exactly, a fi re or explosion 1. This appliance is equipped with an ignition may result causing property damage, personal injury or loss of life. device which automatically lights the
ملخص المحتوى في الصفحة رقم 12
I. After Fireplace is Lit Initial Break-in Procedure • The fireplace should be run three to four hours continuously on high. • Turn the fi replace off and allow it to completely cool. • Remove fi xed glass assembly. See Section 14.F. • Clean fi xed glass assembly. See Section 3. • Replace the fi xed glass assembly and run continuously on high an additional 12 hours. This cures the materials used to manufacture the fi re- place. NOTICE! Open windows for air circulation during fi re- place break-in. •
ملخص المحتوى في الصفحة رقم 13
Maintenance and Service 3 Doors, Surrounds, Fronts Any safety screen or guard removed for servicing must be replaced prior to operating the fi replace. Frequency: Annually By: Homeowner When properly maintained, your fi replace will give you many years of trouble-free service. We recommend an- Tools needed: Protective gloves, stable work surface nual service by a qualifi ed service technician. • Assess condition of screen and replace as necessary. A. Maintenance Tasks-Homeowner • Inspect
ملخص المحتوى في الصفحة رقم 14
have penetrated the sheet metal are sharp and should Venting be avoided. Frequency: Seasonally • Remove all foreign objects. By: Homeowner • Verify unobstructed air circulation. Tools needed: Protective gloves and safety glasses. Burner Ignition and Operation • Inspect venting and termination cap for blockage or obstruction such plants, bird nests, leaves, snow, debris, Frequency: Annually etc. By: Qualifi ed Service Technician • Verify termination cap clearance to subsequent construc- Tools
ملخص المحتوى في الصفحة رقم 15
Installer Guide Getting Started 4 A. Typical Appliance System NOTICE: Illustrations and photos refl ect typical installations and are for design purposes only. Illustrations/diagrams are not drawn to scale. Actual product may vary from pictures in manual VERTICAL TERMINATION CAP HORIZONTAL TERMINATION CAP (SECTION 10.H) (SECTION 10.K) WALL PENETRATION FRAMING (SECTION 8.B) STORM COLLAR (SECTION 10.G) VENT PIPE PENETRATES ROOF PREFERABLY NON-COMBUSTIBLE ROOF WITHOUT AFFECTING ROOF FLASHING
ملخص المحتوى في الصفحة رقم 16
B. Design and Installation Considerations D. Inspect Appliance and Components Heat & Glo direct vent gas appliances are designed to • Carefully remove the appliance and components from operate with all combustion air siphoned from outside of the packaging. the building and all exhaust gases expelled to the outside. • The vent system components and decorative doors and No additional outside air source is required. fronts may be shipped in separate packages. Installation MUST comply with loca
ملخص المحتوى في الصفحة رقم 17
Framing and Clearances 5 It is important to follow the framing and fi nishing instruc- A. Selecting Appliance Location tions step by step to ensure proper placement of fi replace When selecting a location for the appliance it is important to in the surrounding framing/fi nishing materials. consider the required clearances to walls (see Figure 5.1). WARNING! Risk of Fire or Burns! Provide adequate Unlike many traditional, single sided Heat & Glo fi replaces, clearance around air openings and fo
ملخص المحتوى في الصفحة رقم 18
B. Constructing the Appliance Chase A chase is a vertical box-like structure built to enclose the gas appliance and/or its vent system. In cooler climates the vent should enclosed inside the chase. NOTICE: Treatment of ceiling fi restops and wall shield fi restops and construction of the chase may vary with the type of building. These instructions are not substitutes for the requirements of local building codes. Therefore, you MUST check local building codes to determine the requirements to
ملخص المحتوى في الصفحة رقم 19
C. Clearances NOTICE: Install appliance on hard metal or wood surfaces extending full width and depth. DO NOT install directly on carpeting, vinyl, tile or any combustible material other than wood. WARNING! Risk of Fire! Maintain specifi ed air space clearances to appliance and vent pipe: • Insulation and other materials must be secured to prevent accidental contact. • The chase must be properly blocked to prevent blown insulation or other combustibles from entering and making contact with
ملخص المحتوى في الصفحة رقم 20
Combustible Mantel Legs Or Wall Projections D. Mantel and Wall Projections Extending Past The Face Of The Fireplace WARNING! Risk of Fire! Comply with all minimum clear- ances to combustibles as specifi ed. Framing or fi nishing material closer than the minimums listed must be construct- ed entirely of noncombustible materials (i.e., steel studs, concrete board, etc). Combustible Mantels 2 IN. 3 FT. MAXIMUM MINIMUM 1/2 IN. FIREPLACE OPENING Thick Wall 12 IN. 6 IN. Sheathing MINIMUM MAX. Fig
