Ingersoll-Rand 6737X-XXX دليل المستخدم

ملخص المحتوى في الصفحة رقم 1

OPERATOR’S MANUAL 6737X-XXX
RELEASED: 2-2-09
INCLUDING: SERVICE KITS, TROUBLESHOOTING, PARTS LIST,
REVISED: 6-3-10
DISASSEMBLY & REASSEMBLY.
(REV. 02)
TWO-BALL STYLE
LOWER PUMP ENDS
Also covers 637444-XXX service kits
READ THIS MANUAL CAREFULLY BEFORE INSTALLING,
OPERATING OR SERVICING THIS EQUIPMENT.
It is the responsibility of the employer to place this information in the hands of the operator. Keep for future reference.
The original language of this manual is English.
SERV

ملخص المحتوى في الصفحة رقم 2

PARTS LIST (size) (size) Item Description (Qty) Part No. Mtl Item Description (Qty) Part No. Mtl 1 Solvent Cup 29 Gasket (1) 92612 [SS] (models 6737X-X3X, -X6X, -XCX, -XDX) (1) 67369 [SS] 36 Seat Body (1) 93234 [SS] (models 6737X-X8X, -XEX, -XFX, -XGX) (1) 66730 [SS] 40 Retaining Ring (1) 93225 [SS] (models 6737X-X6X, 6 Outlet Body (1) 96436 [SS] 44 Wavy Spring Washer (1) 79175 [SH] -XDX, -XEX, -XGX) (0.103” x 3.365” o.d.) 8 “O” Ring 45 Retaining Washer (1) 93041 [Ny] (models 6737X-KXX) (

ملخص المحتوى في الصفحة رقم 3

PARTS LIST Models 6737X-X8X Models 6737X-X3X 6737X-XEX 6737X-X6X 6737X-XFX 6737X-XCX 6737X-XGX 6737X-XDX  1 1  50  52  51    75 52  26  51  53 40 44 27  12 45  29 28 6 88   76 71   72   8 36   10 8  9  62   15 49 20 19 21 23  ASSEMBLY TORQUE REQUIREMENTS NOTE: DO NOT OVERTIGHTEN FASTENERS. 22 (12) nut, 60 - 70 ft lbs (81.3 - 94.9 Nm). (36) seat body, 100 - 110 ft lbs (135.6 - 149.1 Nm). 23  (62) cap screw, 295 - 305 ft lbs (400.0 - 413.5 Nm). LUBRICATION / SEALANTS 

ملخص المحتوى في الصفحة رقم 4

repeated several times to assure small enough diameter has been achieved to insure proper assembly. 15. Apply lubricant to inside of (9) tube and carefully slide (9) tube over the (72) wiper and (71) “W” packing or (76) packing set, and onto (6) outlet body. NOTE: Once the (9) tube has cleared the packings, a rubber mallet may be used to drive (9) tube into place. 16. Apply Loctite nickel anti-sieze to threads of (10) connecting rods and assemble three (10) connecting rods to (15) inlet b