Ingersoll-Rand 66266-XXX-B دليل المستخدم

ملخص المحتوى في الصفحة رقم 1

OPERATOR’S MANUAL 66266-XXX-B
RELEASED: 1-8-99
INCLUDING: SERVICE KITS, TROUBLESHOOTING, PARTS LIST,
REVISED: 10-18-10
DISASSEMBLY & REASSEMBLY.
(REV. 04)
CHOP-CHECK STYLE
LOWER PUMP ENDS
Also covers 637074-X43-B service kits
READ THIS MANUAL CAREFULLY BEFORE INSTALLING,
OPERATING OR SERVICING THIS EQUIPMENT.
It is the responsibility of the employer to place this information in the hands of the operator. Keep for future reference.
SERVICE KITS LOWER PUMP END DESCRIPTION CHART
Use

ملخص المحتوى في الصفحة رقم 2

PARTS LIST / 66266-XXX-B Item Description (size) (Qty) Part No. [Mtl] Item Description (size) (Qty) Part No. [Mtl] 1 Solvent Cup Assembly (1) 66866-1 [C] 43 Wave Spring (1) 94131 [SH] (not shown, used to adjust item 1) 4Rod (1) 93456-1 [C] 47 Wave Spring (1) 90915 [SH] 51 6 Pump Body (1) 90848 [DI] “V” Packing (66266-343-B, -R43-B) (3) 93661-2 [GFT] (66266-C43-B, -G43-B, -P43-B) 7 Gasket (2) 90306 [Co] (3) 93661-4 [UH] 52 (66266-343-B, -P43-B) 9 Suction Tube (1) 91844 [C] “V” Packing (2) 93

ملخص المحتوى في الصفحة رقم 3

PARTS LIST / 66266-XXX-B UPPER PACKING 51 52  1 51 52 51 115 53 43 1 - 11-1/2 N.P.T.F. - 1 6 7 26 9 10 MIDDLE PACKING 28  47 57 11 36 55 7 24 56 55 34 25 56  21 54 37 23 65 22 23 15 30 LUBRICATION / SEALANTS Keep solvent cup filled with a lubricant such as Wet Sol "Plus" or equivalent. Apply Loctite® 242® to threads when assembling. 31 32 33 Figure 1 66266-XXX-B (en) Page 3 of 4

ملخص المحتوى في الصفحة رقم 4

(34) valve rod (beveled end fi rst). help keep it in place. 8. Thread the (34) valve rod to the (26) plunger rod and 15. Assemble the (6) pump body over the (26) plunger rod tighten, using the wrench fl ats provided. and onto the (10) tie rods. Seat the (9) suction tube into 9. Assemble one (23) “O” ring, the (22) seat (large o.d. cham- the (6) pump body. fer facing down) and the other (23) “O” ring into the (15) 16. Assemble the (43) wave spring, (53) male packing pressure chamber body. wash