Aiphone IS-HTR دليل المستخدم

ملخص المحتوى في الصفحة رقم 1

IS-HTR
Heater and Thermostat for IS Series Door Stations
-INSTRUCTIONS-
The IS-HTR is a heater plate compatible with all IS series door stations (except IS-SS-2G). This
heater will allow you to use the IS door stations in environments with extreme cold temperatures
(-40°F/C). The IS-HTR will mount to the back of the door station using the existing mounting hardware.
Metal side facing wall Gasket side facing station
4-1/8”
INSTALLATION: Surface mount unit
1. Ensure that the conformal side (ora

ملخص المحتوى في الصفحة رقم 2

INSTALLATION: Flush mount unit 1. Ensure that the conformal side (orange) of IS-HTR is facing the door station. Route all door station wiring through the wiring provision opening on the IS-HTR. 2. Connect the door station wiring to the unit and connect the IS-HTR wires (flying leads) to a power source, 24V AC/DC. 3. Remove the 4 nuts and washers holding the plastic chassis to the metal front panel. Place the IS-HTR as shown and reuse the nuts and washers to secure the IS-H