ملخص المحتوى في الصفحة رقم 1
16” Metal Stand Table Fan
Model No: FSM-40
Operating Instructions
FSM-40
© 2006 Soleus Air International
ملخص المحتوى في الصفحة رقم 2
Thank you for choosing a Soleus Air 16” Stand Fan. This owner’s manual will provide you with valuable information necessary for the proper care and maintenance of your new product. Please take a few moments to thoroughly read the instructions and familiarize yourself with all the operational aspects of your new fan. For your own records, please attach a copy of your sales receipt to this manual. Also, write the store name/location, date purchased, and serial number below: Store Name:
ملخص المحتوى في الصفحة رقم 3
WARNING This fan has a grounded three pronged plug intended to fit into a three slot outlet. (A) An adapter is available for connecting three pronged plugs into two slot outlets. (B) When doing so, the green ground- ing tab extending from the adapter must be fastened under the wall plate’s mounting screw. The adapter should not be used if a three-slot out- let is available. DO NOT DEFEAT THE SAFETY PURPOSE OF THE GROUNDED PLUG. TECHNICAL SPECIFICATIONS Voltage Rating 120V, 6
ملخص المحتوى في الصفحة رقم 4
PRODUCT DIAGRAM A) Front Grill B) Fan Blade C) Securing Screw D) Mounting Nut E) Back Grill F) Carrying Handle G) Motor Shaft H) Speed Control Knob I) Oscillation Knob J) Motor Housing K) Fan Head Neck L) Pole M) Adjustable Height Knob N) Fan Base O) Black Weight P) Washer Q) Locking Lever R) Adjustable Tilt Knob S) Range of Motion Screw T) Range of Motion Hole U) Securing Knob V) Carriage Bolt 4
ملخص المحتوى في الصفحة رقم 5
ASSEMBLY INSTRUCTIONS Estimated assembly time: Approximately 5 minutes Tools required: Phillips screwdriver (not included) Base Assembly: 1) Unscrew the locking lever from the bottom of the pole. 2) Turn the pole upside down and slide the opening in the center of the fan base over the pole. Place the black weight onto the base followed by the washer. 3) Insert the threaded end of the locking lever into the hole of the washer and through the base into the bottom of the stand. Turn the
ملخص المحتوى في الصفحة رقم 6
OPERATING INSTRUCTIONS 1. Set the fan on a stable, level surface. 2. Confirm that the Speed Control Knob is set to “O” (off). Plug the cord into a standard 120V A/C outlet. 3. Adjust to the desired speed setting: O: Off I: Low Speed II: Medium Speed III: High Speed 4. The fan can operate in oscillation or stationary mode. Press the Oscillation Knob down to activate the oscillating mode. To stop oscillation, pull knob up. 5. Unplug the fan when not in use. Adjustment Instruct
ملخص المحتوى في الصفحة رقم 7
CLEANING & MAINTENANCE 1. Turn the fan off and unplug the unit. 2. Wipe the fan down with a damp cloth for most efficient operation. 3. Air dry the fan completely before use. 4. Never use abrasive cleaning agents or solvents. This may cause damage or deterioration to the surface of the unit. 5. Do not immerse the fan in any form of liquid. Do not allow water to drip on or into the fan motor housing. Fan Blade Cleaning: • Make certain the fan is unplugged. Unlock the metal clips
ملخص المحتوى في الصفحة رقم 8
WARRANTY One Year Limited Warranty Soleus International Inc. warrants the accompanying Soleus Air FSM-40 16” Stand Fan to be free of defects in material and workmanship for the applications specified in its operation instruction for a period of ONE (1) year from the date of original retail purchase in the United States. If the unit exhibits a defect in normal use, Soleus International Inc. will, at its option, either repair or replace it, free of charge within a reasonable time after
