ملخص المحتوى في الصفحة رقم 1
For Your Records and Warranty
Assistance
Model Name: _____________________
Catalog/Model No.: ________________
Serial No.: ________________________
Date Purchased: ___________________
Where Purchased: _________________
For reference also attach your receipt or a
copy of your receipt to the manual.
42625-01 • 08/27/06
ملخص المحتوى في الصفحة رقم 2
Welcome Your new Hunter ceiling fan is an addition to your home or office that ® will provide comfort and performance for many years. This installation and operation manual gives you complete instructions for installing and operating your fan. We are proud of our work. We appreciate the opportunity to supply you with the best ceiling fan available anywhere in the world. Before installing your fan, for your records and warranty assistance, record information from the carton and Hunter namepl
ملخص المحتوى في الصفحة رقم 3
Installer’s Choice and Optional Accessories Understanding Mounting and Installer’s Choice® Support Brace Hunter’s patented 3-position mounting system provides you maximum installation flexibility and ease. You can install your Hunter fan in one of three ways, depending on ceiling height and your preference: Low Profile, Standard, or Angle mounting. The steps in this manual include Ceiling Standard instructions for all three Installer’s Choice mounting methods. Outlet Box Mounting Style Con
ملخص المحتوى في الصفحة رقم 4
1 • Getting Ready To install a ceiling fan, be sure you can do the following: • Locate the ceiling joist or other suitable support in ceiling. • Drill holes for and install wood screws. • Identify and connect electrical wires. • Lift 40 pounds. If you need help installing the fan, your Hunter fan dealer can direct you to a licensed installer or electrician. Gathering the Tools You will need the following tools for installing the fan: • Electric drill with 9/64” bit • Standard screwdriver (magne
ملخص المحتوى في الصفحة رقم 5
2 • Installing the Ceiling Plate CAUTION: To avoid possible electrical shock, before installing your fan, Towards disconnect the power by turning off the circuit breakers to the outlet box Ceiling Peak and associated wall switch location. If you cannot lock the circuit breakers in the off position, securely fasten a prominent warning device, such as a tag, to the service panel. 2-1. Drill two pilot holes into the wood support structure through the outermost holes in the outlet box. The p
ملخص المحتوى في الصفحة رقم 6
3 • Assembling and Hanging the Fan WARNING: Fan may fall if not assembled as directed in these Standard or Angle Mounting installation instructions. Steps 3-2 – 3-3 3-1. Unbundle the wires from the fan. Downrod For Standard or Angle mounting: 3-2. Insert the downrod through the canopy and canopy trim ring. Canopy Feed the wires from the fan through the downrod on one side of the pin in the ball. Canopy 3-3. Loosen the square head set screw on the adapter to install the Trim Ring Se
ملخص المحتوى في الصفحة رقم 7
fsdfsdf 4 • Wiring the Fan All wiring must be in accordance with national and local electrical codes and ANSI/NFPA 70-1999. If you are unfamiliar with wiring, use a qualified electrician. Wire Nut Wall switches are not included. Select an acceptable general-use switch in accordance with national and local electrical codes. 4-1. Before attempting installation, make sure the power is still off. 4-2. To connect the wires, hold the bare metal leads together and place a wire nut over them, then
ملخص المحتوى في الصفحة رقم 8
5 • Installing the Canopy and Canopy Trim Ring WARNING: Failure to complete the following steps could cause the fan Step 5-1 to fall. Note: It is recommended you use a magnetic tip screwdriver for the following steps. Tab 5-1. Rotate the hanger ball so the tab in the canopy is secure in the hanger ball groove. Note: Your fan may have multiple tabs and Groove grooves that must be aligned. 5-2. Swing the fan up to align the canopy screw holes with the mounting holes on the ceiling plate.
ملخص المحتوى في الصفحة رقم 9
6 • Assembling the Blades Hunter fans use several styles of fan blade irons (brackets that hold the blade to the fan). 6-1. Your fan may include blade grommets. If your fan has grommets, Step 6-1 (Detail) insert them by hand into the holes on the blades. 6-2. Attach each blade to a blade iron using three blade assembly screws. If you used grommets, the blades may appear slightly loose after screws are tightened. This is normal. 6-3. Remove the blade mounting screws and rubber shipping bumper
ملخص المحتوى في الصفحة رقم 10
7 • Installing the Light Kit WARNING: Use only the light fixture supplied with this fan model. 7-1. To attach the upper switch housing, partially install two #6-32 x 3/8” housing assembly screws into the switch housing mounting plate. 7-2. Feed the upper plug connector through the center opening of the housing. 7-3. Align the keyhole slots in the housing with the housing assembly screws. 7-4. Turn the housing counterclockwise until the housing assembly screws are firmly situated in the
ملخص المحتوى في الصفحة رقم 11
7-5. To attach the lower switch housing, connect the upper plug connector from the motor to the lower plug connector in the lower switch housing assembly. Plug Note: Both plug connectors are polarized and will only fit together Connector one way. Make sure the connectors are properly aligned before connecting them. Incorrect connection could cause improper Lower operation and damage to the product. Switch Housing 7-6. Place the lower switch housing assembly over the upper switch hous
ملخص المحتوى في الصفحة رقم 12
8 • Operating and Cleaning Your Ceiling Fan 8-1. Turn on electrical power to the fan. 8-2. The fan pull chain controls power to the fan. The pull chain has four settings in sequence: High, Medium, Low and Off. • Pull the chain slowly to change settings. • Release slowly to prevent the chain from recoiling into the blades. • The chain uses a breakaway connector that separates if the chain is jerked. If this happens, simply reinsert the chain into the connector. 8-3. Ceiling fans work best by
ملخص المحتوى في الصفحة رقم 13
9 • Troubleshooting Problem: Nothing happens; fan does not move. 1. Turn power on, replace fuse, or reset breaker. 2. Loosen canopy, check all connections according to the wiring the fan section. 3. Check the plug connection in the switch housing. 4. Push motor reversing switch firmly left or right to ensure that the switch is engaged. 5. Pull the pull chain to ensure it is on. 6. Remove the shipping bumpers. Problem: Noisy operation. 1. Tighten the blade bracket screws until snug. 2. Check
