DeLonghi NJ 07663 دليل المستخدم

ملخص المحتوى في الصفحة رقم 1

IMPORTANT INSTRUCTIONS
SAVE THESE INSTRUCTIONS
INSTRUCCIONES IMPORTANTES
GUARDAR LAS INSTRUCCIONES
PORTABLE ELECTRIC
BASEBOARD HEATER
CONVECTOR ELECTRICO
PORTATIL CON ZOCALO
1

ملخص المحتوى في الصفحة رقم 2

IMPORTANT SAFEGUARDS When using electrical appliances, basic precautions should always be followed to reduce risk of fire, electric shock, and injury to persons, including the following: 1. Read all instructions before using this heater. 2. This heater is hot when in use. To avoid burns, do not let bare skin touch hot surfaces. Use handle when moving this heater. Keep combustible materials, such as furniture, pillows, bedding, papers, clothes, and curtains at least 3 feet (0,9 m) from the front

ملخص المحتوى في الصفحة رقم 3

17. Do not use an extension cord because the extension cord may overheat and cause a risk of fire. However, if you have to use an extension cord, the cord shall be UL listed No. 1 4 AWG minimum size and rated not less than 1,875 watts, ISAMP at 125 V and has to be used only for supplying power to this heater. 18. Be sure that the plug is fully inserted into an appropriate receptacle. Please remember that receptacles also deteriorate due to aging and continuous use: check periodically if signs o

ملخص المحتوى في الصفحة رقم 4

HOW TO USE YOUR HEATER Your product is equipped with a polarized alternating current line plug (a plug having one blade wider than the other). This plug will fit into the power outlet only one way. This is a safety feature. If you are unable to insert the plug fully into the outlet, try reversing the plug. If the plug should still fail to fit, contact your electrician to replace your obsolete outlet. Do not defeat the safety purpose of the polarized plug. 1. LOCATION Place heater on floor beneat

ملخص المحتوى في الصفحة رقم 5

5. OPERATION AND USE By pressing the “ON/OFF Power selection” button (Fig. 2) one or more times, the appliance will select the operating heating power (see chart below). Each time you push the "ON/OFF" button an acoustic signal will be heard. Note: It is possible to remove the acoustic signal by pressing the "ON/OFF" button for almost 3 seconds when you plug the appliance in. If you want to restore it, do the same thing. P max (maximum power) P med (medium power) P min (minimum power) off If

ملخص المحتوى في الصفحة رقم 6

If a power level below “P max” has been selected using the “ON/OFF” button, the appliance will modulate between the selected level and the lower power levels. 6. ANTIFREEZE FUNCTION Press the ON/OFF button to select the "P-max" power level. Set the thermostat dial to the " " position (fig. 2). When set in this way, the appliance will switch on automatically only if the room temperature falls below 42°F (5°C), to prevent it from freezing, at minimum energy consumption. This function is not guar