AMX ENV-VST-C دليل المستخدم

ملخص المحتوى في الصفحة رقم 1

Installation Guide
ENV-VST-C ViewStat Color Communicating Thermostat
ATTENTION: READ THIS FIRST!
ViewStat Color Communicating Thermostat Specifications (Cont.)
For more detailed installation, configuration, programming, and operating
Circuit Board Components:
instructions, refer to the ViewStat Color Communicating Thermostat
Communication Terminals with captive-wire connectors that connects to the
Operation/Reference Guide available on-line at www.amx.com.
and HVAC thermostat, HVAC equipment,

ملخص المحتوى في الصفحة رقم 2

Wiring for AxLink Communication and Equipment Terminal Wiring Definitions (Cont.) Follow these steps to connect the wiring into a captive-wire connector: Y2 2nd stage compressor 1. Strip 1/4 inch off the wire insulation for all four wires. B Reversing valve (heat) 2. Tin 2/3 of the exposed wire. 3. Insert each wire into the appropriate captive-wire connector up to the O Reversing valve (cool) insulation. DEH Dehumidify 4. Tighten the captive screws to secure the fit in the connector. HUM Humidif