AllTrade 480742 دليل المستخدم

ملخص المحتوى في الصفحة رقم 1

Model #480742
DIGITAL INFRARED THERMOMETER
CAREFULLY READ THROUGH THE ENTIRE OWNER’S MANUAL
BEFORE OPERATING YOUR DIGITAL INFRARED THERMOMETER.
KEEP MANUAL WITH IMPORTANT RECORDS FOR
SAFETY INSTRUCTIONS, OPERATING PROCEDURES AND WARRANTY.
Please retain these instructions for future reference.
If you encounter any problems or difficulties,
please contact our toll free Customer Service Department at:
1-800-423-3598
1431 VIA PLATA
1-310-522-9008 (California only)
LONG BEACH, CA 90810-1462
FOR C

ملخص المحتوى في الصفحة رقم 2

Congratulations on your purchase of the Digital Infrared Thermometer! Your Digital Infrared SPECIFICATIONS: GENERAL Thermometer is fitted with optical filters that allow you to safely take infrared surface temperature Display 4 digit LCD display readings when contact with the object is not an option. Its convenient laser targeting and high Measurement Ranges -40˚C to 500˚C (-40˚F to 932˚F) with 0.1˚C (32.18˚F) resolution distance-to-spot ratio gives you the flexibility to take accurate temper

ملخص المحتوى في الصفحة رقم 3

PARTS AND DESCRIPTION OPERATING INSTRUCTIONS USING THE LASER POINTER FEATURE FIGURE 1 Your Digital Infrared Thermometer is equipped with a laser pointer feature that helps you accurately target the object you are attempting to measure. While pulling the trigger, press the LASER key (FIGURE 1). Repeat to turn the laser pointer feature off. Laser Pointer Beam USING THE BACKLIGHT FEATURE LCD Display The back light feature allows you to easily read the LCD display when working in dim conditions. W

ملخص المحتوى في الصفحة رقم 4

TAKING A TEMPERATURE READING MAINTENANCE 1. Hold the device by its handle and pull the trigger. There will be a one second delay, and then the LCD Your Digital Infrared Thermometer should always be stored in the protective carrying case provided. will come on. This helps keep the lens clean and free of debris which ensure temperature reading accuracy. If the lens is soiled, use low pressure compressed air to remove any debris or soil. If the debris cannot be 2. While continuing to pull the trig