ملخص المحتوى في الصفحة رقم 1
®
ewing
S
Machine
OPERATION MANUAL
9 10 11 12 13 14 15 16 17 18 19 20
28 29 30 31 32 33 34 35 36 37 38 39 40
ملخص المحتوى في الصفحة رقم 2
IMPORTANT SAFETY INSTRUCTIONS When using this machine, basic safety precautions should always be taken, including the following: Read all instructions before using. DANGER - To reduce the risk of electric shock: 1. The machine should never be left unattended while plugged in. Always unplug the machine from the electrical outlet immediately after using and before cleaning. 2. Always unplug before changing the light bulb. Replace bulb with same type rated 12V 5 watts. WARNING - To reduce the risk
ملخص المحتوى في الصفحة رقم 3
FOR USERS IN THE UK, EIRE, MALTA AND CYPRUS ONLY If this machine is fitted with a three-pin non-rewireable BS plug then please read the following. IMPORTANT If the available socket outlet is not suitable for the plug supplied with this equipment, it should be cut off and an appropriate three-pin plug fitted. With alternative plugs an approved fuse must be fitted in the plug. NOTE The plug served from the main lead must be destroyed as a plug with bared flexible cords is hazardous if engaged in a
ملخص المحتوى في الصفحة رقم 4
CONGRATULATIONS ON CHOOSING OUR MACHINE Your machine is the most advanced computerized household sewing machine. To fully enjoy all the features incorporated, we suggest that you study the manual. PLEASE READ BEFORE USING THIS MACHINE For safe operation 1. Be sure to keep your eye on the needle while sewing. Do not touch the balance wheel, thread take-up, needle, or other moving parts. 2. Remember to turn off the power switch and unplug the cord when: • Operation is completed • Replacing or rem
ملخص المحتوى في الصفحة رقم 5
PATTERNS (PROGRAMMED IN CONTENTS BEFORE USE SEWING UTILITY STITCHES MAINTENANCE SEWING CHART MACHINE) CONTENTS CHAPTER 1 2. UTILITY STITCHES ................................................. 34 STRAIGHT STITCHES ...................................... 34 BEFORE USE Sewing stretch fabrics .................................. 35 ................................................... 4 Changing the stitch length ........................... 35 PART NAMES ...................................................
ملخص المحتوى في الصفحة رقم 6
PATTERNS (PROGRAMMED IN CONTENTS BEFORE USE SEWING UTILITY STITCHES MAINTENANCE SEWING CHART MACHINE) MAINTENANCE ................................................. 67 CLEANING THE MACHINE ............................... 67 Cleaning the operation panel ....................... 67 Cleaning the machine casing ....................... 67 Cleaning the race and shuttle ...................... 67 CHANGING THE LIGHT BULB .......................... 69 TROUBLE SHOOTING ......................................
ملخص المحتوى في الصفحة رقم 7
PATTERNS (PROGRAMMED IN CONTENTS BEFORE USE SEWING UTILITY STITCHES MAINTENANCE SEWING CHART MACHINE) BEFORE USE CHAPTER 1 PART NAMES 1 13 2 3 12 14 4 15 5 6 7 8 9 10 11 A B D C 1– Handle A– Main power switch and connectors 2– Spool cap B– Accessory compartment 3– Thread guide for bobbin winding C– Operation panel 4– Needle threader lever D– Operation buttons 5– Thread cutter 6– Buttonhole lever 7– Needle threader 8– Presser foot 9– Feed dog 10– Bobbin cover 11– Feed dog position switch 12– Uppe
ملخص المحتوى في الصفحة رقم 8
PATTERNS (PROGRAMMED IN CONTENTS BEFORE USE SEWING UTILITY STITCHES MAINTENANCE SEWING CHART MACHINE) A. MAIN POWER SWITCH AND CONNECTORS 1 Main power switch Use to turn on/off the main power. 2 Foot controller jack Use to connect the foot controller. 3 Power cord Use to connect the machine to the power supply. CAUTION – When leaving the machine unattended, the 2 main switch of the machine should be switched off or the plug must be removed from the socket-outlet. – When servicing the machine, or
ملخص المحتوى في الصفحة رقم 9
PATTERNS (PROGRAMMED IN CONTENTS BEFORE USE SEWING UTILITY STITCHES MAINTENANCE SEWING CHART MACHINE) STANDARD ACCESSORIES Part Code No. Part Name 123 U.S.A. Others Needle set 1 75/11: 2 pcs 90/14: 2 pcs X58358-001 90/14 Ball point needle (gold colored) (for stretch fabrics): 2 pcs 456 2 Cleaning brush X59476-051 3 Screwdriver (large) X55467-051 4 Screwdriver (small) X55468-051 5 Bobbin (3) SA155 XA3812-051 6 Spool cap (small) 130013-053 789 7 Spool cap (large) 130012-053 8 Eyelet punch 135793-0
ملخص المحتوى في الصفحة رقم 10
PATTERNS (PROGRAMMED IN CONTENTS BEFORE USE SEWING UTILITY STITCHES MAINTENANCE SEWING CHART MACHINE) OPERATION PANEL 4 6 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 12 3 5 7 C. OPERATION PANEL 1 Needle stop position switch key Touch this key to select the needle stop position (the needle position when the machine is not operating) to be up or down. When the LED lamp is lit, the needle stop position is down. When the LED lamp
ملخص المحتوى في الصفحة رقم 11
PATTERNS (PROGRAMMED IN CONTENTS BEFORE USE SEWING UTILITY STITCHES MAINTENANCE SEWING CHART MACHINE) OPERATION BUTTONS Using the operation buttons D. OPERATION BUTTONS 1 Sewing speed controller Slide this lever to change the sewing speed. 2 “NEEDLE POSITION” button 2 1 Press this button to move the needle either up or down. 3 3 3 “REVERSE STITCH” button 4 Hold down this button to sew either backwards 5 or in the same place at a slow speed. When sewing a reverse stitch, sewing is done in re- ver
ملخص المحتوى في الصفحة رقم 12
PATTERNS (PROGRAMMED IN CONTENTS BEFORE USE SEWING UTILITY STITCHES MAINTENANCE SEWING CHART MACHINE) POWER SUPPLY WARNING • Use only regular household electricity for the power source. Using other power sources may result in fire, electric shock, or damage to the machine. • Turn off the main power and remove the plug in the following circumstances: - When you are away from the machine - After using the machine - When the power fails during use - When the machine does not operate correctly due t
ملخص المحتوى في الصفحة رقم 13
PATTERNS (PROGRAMMED IN CONTENTS BEFORE USE SEWING UTILITY STITCHES MAINTENANCE SEWING CHART MACHINE) BOBBIN WINDING / BOBBIN THREAD SETTING Winding the bobbin and setting the bobbin thread CAUTION Use only bobbins recommended by the manufacturer of this machine (see page 5). Using other bobbins may result in damage or injury. 3 2 4,9 5 6 6 7,8 1 1. Connect the machine to the power supply and turn on the main power. 2. Place the spool of thread on the spool pin. The thread end 3 should come from
ملخص المحتوى في الصفحة رقم 14
PATTERNS (PROGRAMMED IN CONTENTS BEFORE USE SEWING UTILITY STITCHES MAINTENANCE SEWING CHART MACHINE) 3. Pass the thread through the thread guide as shown by the arrows. 4. Align the groove in the bobbin with the spring on the shaft and 2 place the bobbin on the bobbin winder shaft. Then, push the bobbin winder shaft to the right. 1 Spring on the shaft 1 2 Groove of the bobbin 1 2 5. Wind the thread clockwise around the bobbin four or five times, pass the end of the thread through the slit in th
ملخص المحتوى في الصفحة رقم 15
PATTERNS (PROGRAMMED IN CONTENTS BEFORE USE SEWING UTILITY STITCHES MAINTENANCE SEWING CHART MACHINE) Setting the bobbin CAUTION Setting the bobbin improperly may cause the thread tension to loosen, breaking the needle and resulting in injury. 1 Wound evenly 2 Wound poorly 12 1 1. Slide open the bobbin cover. 1 Bobbin cover 2 Bobbin cover release button 2 2. Insert the bobbin into the shuttle with the thread direction as shown in the diagram. CAUTION Be sure the bobbin is set so the thread unrol
ملخص المحتوى في الصفحة رقم 16
PATTERNS (PROGRAMMED IN CONTENTS BEFORE USE SEWING UTILITY STITCHES MAINTENANCE SEWING CHART MACHINE) UPPER THREADING CAUTION Be sure to thread the machine properly. Improper threading can cause the thread to tangle and break the needle, leading to injury. Note When threading the sewing machine, be sure that one of the presser feet mentioned in this Operation Manual is installed. 3 4 1 6 5 2 1. Raise the presser foot lever. (If the presser foot is not raised, 1 the upper thread cannot be threade
ملخص المحتوى في الصفحة رقم 17
PATTERNS (PROGRAMMED IN CONTENTS BEFORE USE SEWING UTILITY STITCHES MAINTENANCE SEWING CHART MACHINE) 4. While holding the end of the thread with your left hand, pass the thread through the guides in the order shown by the num- bers. 2 1 1 Note 2 - If the thread is pushed down at 1 to make it taut, it can be passed around the other thread guides more easily. - Incorrectly feeding the thread will result in faulty sewing. 1 Thread take-up lever Threading the take-up lever 4 1 5 5. Lower the press
ملخص المحتوى في الصفحة رقم 18
PATTERNS (PROGRAMMED IN CONTENTS BEFORE USE SEWING UTILITY STITCHES MAINTENANCE SEWING CHART MACHINE) 8. Lower the needle threader lever all the way down using your left index finger. Check that the thread is held by the guide (large hook) and that the third hook on the needle threader has passed through the eye of the needle. 1 Second set of hooks 2 Third hook 11 9. As you lower the needle threader lever, pull the thread to the left and catch it on the large hook. When the needle threader 2 lev
ملخص المحتوى في الصفحة رقم 19
PATTERNS (PROGRAMMED IN CONTENTS BEFORE USE SEWING UTILITY STITCHES MAINTENANCE SEWING CHART MACHINE) Using the extra spool pin and the net Extra spool pin Use when sewing with metallic thread. 3 1. Insert the extra spool pin onto the end of the bobbin winder shaft. 2 2. Install the spool felt and the thread spool in that order, and then thread the upper thread. 1 1 Insert the extra spool pin into the end of the bobbin winder shaft 2 Spool felt 3 Thread spool * When setting the thread spool, set
ملخص المحتوى في الصفحة رقم 20
PATTERNS (PROGRAMMED IN CONTENTS BEFORE USE SEWING UTILITY STITCHES MAINTENANCE SEWING CHART MACHINE) STARTING AND STOPPING SEWING “START/STOP” button 1 Place the fabric under the presser foot, lower the presser foot, and then press the “START/STOP” button. The sewing ma- chine starts sewing. * Slide the sewing speed controller to adjust the sewing speed. * Hold down the “START/STOP” button to sew at a slow speed. 2. Press the “START/STOP” button to stop the sewing machine. Foot controller CAUTI
