Grizzly G1600 دليل المستخدم

ملخص المحتوى في الصفحة رقم 1

MODEL G1600
PNEUMATIC SANDING
DRUM FOR MODEL G1495
INSTRUCTIONS
Specifications
Mounting Bore ..............................1" x 12 TPI LH
Length............................................................... 6"
EYE INJURY HAZARD!
Always wear safety glasses Diameter ...........................................................4"
during use to prevent
Air Inlet Type ...............................Schrader Valve
serious personal injury.
Maximum Pressure .................................. 10 PSI
Inf

ملخص المحتوى في الصفحة رقم 2

Operation Operation Tips 1. DISCONNECT LATHE FROM POWER! • Adjust the pressure in the drum to fine-tune the firmness of the drum for sanding con- 2. Install the sanding drum on the lathe spindle tours. using the adapter included with the lathe (Figure 2). • Always hold the workpiece firmly—the soft surface of the drum will exert more force on the workpiece than a traditional sanding Lathe Outboard drum. Spindle Adapter • Deflate the drum when not in use. Sanding Drum Parts Breakdown & List